Others “HAM Community Target Challenge” 20, 40, 80y

[Danman]

my printer will be fixed in a couple days, looking forward to the challenge.

For me the challenge is exactly that, getting these printed and in my hand, then I'll mop the floors....actually That's mighty fine shooting @FL22 ! Gulp First coat of paint is on the new table, will shoot the tried and true 18.13s myself. Have NEVER grouped the gun inside of 30yards, should be fun!

 

[Joey 69]

Got my print cartridges 2 days early, Thanks Amazon!! Here are my 2, not to sure of the scoring. I had the Ghost
zeroed in dead nutts at 35 yds. but at 20yds i had to use moa and holdover, that really confused the old guy.

 

[Gramps-Too]

Nice shooting @FL22 that will be tough to beat.

 

[Danman]

Not bad at all @Joey 69 ...Very nice set up as well! That's probably about the ceiling on speed/accuracy on them 18.13....I force fed my Ghost HP a few mags of em (HW - min, reg 165) and they were doing 990FPS still. Some centered nicely but a good bunch bailed on the group. Definitely destabilizing at that speed at the distances i shot it at (50-100y)

 

[FL22]

Got my print cartridges 2 days early, Thanks Amazon!! Here are my 2, not to sure of the scoring. I had the Ghost
zeroed in dead nutts at 35 yds. but at 20yds i had to use moa and holdover, that really confused the old guy.View attachment 8040View attachment 8041
View attachment 8039View attachment 8042

Target #1 you did better than 100, I think 120.

Kudos for taming that Ghost at 20 yards .

Not sure why the target printed out that way, it’s the original version. I checked it and the preview is the newer one .

Great job @Joey 69 and thanks for participating in the challenge!

 

[Florida_Man]

It’s been raining every opportunity I’ve had. Maybe tomorrow after yard maintenance

 

[Joey 69]

Not bad at all @Joey 69 ...Very nice set up as well! That's probably about the ceiling on speed/accuracy on them 18.13....I force fed my Ghost HP a few mags of em (HW - min, reg 165) and they were doing 990FPS still. Some centered nicely but a good bunch bailed on the group. Definitely destabilizing at that speed at the distances i shot it at (50-100y)

Thanks Danman, any idea what i would need to make my 22 plus an HP? maybe 23" barrel, Probe, heavier hammer and spring?. or am i limited to a .22.? would like to go to 30cal, got invited to maine for Raccoon season. looks like barrel kits are for HP models not plus. Have you tried any heavy amo like 25gr, on your ghost?.
Thanks for any info.

 

[Danman]

Thanks Danman, any idea what i would need to make my 22 plus an HP? maybe 23" barrel, Probe, heavier hammer and spring?. or am i limited to a .22.? would like to go to 30cal, got invited to maine for Raccoon season. looks like barrel kits are for HP models not plus. Have you tried any heavy amo like 25gr, on your ghost?.
Thanks for any info.

The swap is verrryy simple sir! Just need the 23" .30cal barrel kit with probe, grab a mag, dial reg pressure up and plus is now an HP. (check out @Sub 12 airgunners or AoA vids for anything Ghost related!) Knew you shoulda went HP The .30 cal swap interests me as well...If u have 300cc bottle that will work but shot count will be horrid.

 

[Joey 69]

The swap is verrryy simple sir! Just need the 23" .30cal barrel kit with probe, grab a mag, dial reg pressure up and plus is now an HP. (check out @Sub 12 airgunners or AoA vids for anything Ghost related!) Knew you shoulda went HP The .30 cal swap interests me as well...If u have 300cc bottle that will work but shot count will be horrid.

Thanks Danman for the reply and link. I'm going to start saving now.!!

 

[pan60]

i was hopeing to participate but i am having printer issues the wife is trying to figure it out. : (
we should try and do this regure!
i would be good for once a month?

 

[FL22]

i was hopeing to participate but i am having printer issues the wife is trying to figure it out. : (
we should try and do this regure!
i would be good for once a month?

This Challenge is still open till 9/7 . Hopefully you can join in .

You talked about pumpkin season…. I was thinking about something to get the Grandkids, kids or inner child involved in the Challenge. Instead of carving out faces on a pumpkin, draw and shoot out the face.

It’ll be “The Great Shootout”, Charlie B.

 

[pan60]

This Challenge is still open till 9/7 . Hopefully you can join in .

You talked about pumpkin season…. I was thinking about something to get the Grandkids, kids or inner child involved in the Challenge. Instead of carving out faces on a pumpkin, draw and shoot out the face.

It’ll be “The Great Shootout”, Charlie B.

i will be post our our guidlines in the next day or so for our anual pumkin carve.
it will be starting in the next week or so.

 

[Florida_Man]

I only got one in. I had to shoot from inside my house. The time it wasn’t raining this weekend was devoted to yard maintenance.
I had to shoot across my body from the window I peer from, but the opposite side of my yard. I think I went off reg the last two shots or the Apolo 16gr got me

I waited to photograph the target until after the lightning passed. Dismal 110

 

[FL22]

I only got one in. I had to shoot from inside my house. The time it wasn’t raining this weekend was devoted to yard maintenance.
I had to shoot across my body from the window I peer from, but the opposite side of my yard. I think I went off reg the last two shots or the Apolo 16gr got me

I waited to photograph the target until after the lightning passed. Dismal 110

110 is better than a zero. You showed up, had to fight the elements .

Thanks for being part of the Challenge and thanks for posting targets for everyone to try out.

 

[FL22]

i will be post our our guidlines in the next day or so for our anual pumkin carve.
it will be starting in the next week or so.

To everybody and pan60, I was not aware that pan and HAM Community already had an annual pumpkin carve.

I apologize for my oversight in this matter. I was graciously informed of my error and asked to try and come up with a printable pumpkin target to which I had to explain that I did not come up with any of these targets for this Challenge .

I plan on reaching out to an individual that I think may be able to help and try and come up with something .

 

[Joey 69]

To everybody and pan60, I was not aware that pan and HAM Community already had an annual pumpkin carve.

I apologize for my oversight in this matter. I was graciously informed of my error and asked to try and come up with a printable pumpkin target to which I had to explain that I did not come up with any of these targets for this Challenge .

I plan on reaching out to an individual that I think may be able to help and try and come up with something .

How about this one.

 

[FL22]

How about this one. View attachment 8059

I’ll get hate mail when everyone’s printer blows up .

 

[Florida_Man]

I’ll get hate mail when everyone’s printer blows up .

IT dept’s at HAm members workplaces “what’s with all the orange?”

 

[FL22]

IT dept’s at HAm members workplaces “what’s with all the orange?”

High Visibility for safety… certainly not an attempt at wasting what used to be and probably still is the most expensive fluid on earth.

 

[Gramps-Too]

How about this one?