Break Barrel “Scar Face” my new HW95N

[FL22]

I’ve never eaten there but I’m always careful where I eat because I know too much about restaurants doing equipment repairs.

Yes, eat drink and be wary. I’ve done electrical service work in several restaurants and bars. I know how it can be.

 

[PasadenaMike]

Yes, eat drink and be wary. I’ve done electrical service work in several restaurants and bars. I know how it can be.

Sometimes ignorance is best

 

[Hateful McNasty]

Weight may not be the factor as much as the difference in pellets . A heavier jsb can be faster then a lighter cphp.

Shapes , looser or tighter fit , ect ..

 

[FL22]

Sometimes ignorance is best

With some things that’s probably true. On the other hand, what you don’t know can kill you.

 

[PasadenaMike]

With some things that’s probably true. On the other hand, what you don’t know can kill you.

lol

 

[FL22]

Weight may not be the factor as much as the difference in pellets . A heavier jsb can be faster then a lighter cphp.

Shapes , looser or tighter fit , ect ..

I’m sure you’re right, but what the heck I’ll retest this weekend. I’ll have the BSDs and do a 10 shot average of each.

 

[Hateful McNasty]

Well I'm glad your enjoying that hw.

 

[FL22]

Well I'm glad your enjoying that hw.

I definitely am.

I appreciate you taking the time to answer all my questions and provide me with great information to help me take care of it for years to come.

 

[Hateful McNasty]

Well good it is a serviceable gun to maintain for years .. lots of forum help and info as well to guide ya along ..

Had 20 minutes on the oven and it stopped raining so I popped of a quick 10@50y. R9 irons cphp .177

As usual that one that got away

 

[Danman]

Weight may not be the factor as much as the difference in pellets . A heavier jsb can be faster then a lighter cphp.

Shapes , looser or tighter fit , ect ..

I definitely agree, just that I actually chroned those 2 outta my springer and got different (opposite) results. Just interested to know if correct, and I'd be very surprised if the 8.44s were faster. You know the head size FL22? Remember when I order my last tin I could pick from 4.51, 4.52, and 4.53 head sizes! Also Is the HW putting out its advertised FPE then? My TX definitely is a little shy but it's plenty accurate, so I'm fine with it

 

[FL22]

I definitely agree, just that I actually chroned those 2 outta my springer and got different (opposite) results. Just interested to know if correct, and I'd be very surprised if the 8.44s were faster. You know the head size FL22? Remember when I order my last tin I could pick from 4.51, 4.52, and 4.53 head sizes! Also Is the HW putting out its advertised FPE then? My TX definitely is a little shy but it's plenty accurate, so I'm fine with it

The lid just says 4.5 mm. I just told AoA to send me whatever it would shoot best with their opinion.

I have no idea what it’s advertised FPE is, here’s a link for HAM‘s review. I also went to HW‘s website. I didn’t see anything there either.

Weihrauch HW95 Air Rifle Test Review .177 Caliber - Hard Air Magazine

The Weihrauch HW95 air rifle is accurate, powerful enough for most shooters, easy enough to cock, has an outstanding trigger and great finish

hardairmagazine.com

 

[Danman]

The lid just says 4.5 mm. I just told AoA to send me whatever it would shoot best with their opinion.

I have no idea what it’s advertised FPE is, here’s a link for HAM‘s review. I also went to HW‘s website. I didn’t see anything there either.

Weihrauch HW95 Air Rifle Test Review .177 Caliber - Hard Air Magazine

The Weihrauch HW95 air rifle is accurate, powerful enough for most shooters, easy enough to cock, has an outstanding trigger and great finish

hardairmagazine.com

Well there is this...."In this HAM test, the HW95 air rifle developed Muzzle Energies between 13.3 and 15.5 Ft/Lbs" So it's comparable to the standard power TX

 

[Hateful McNasty]

Them pellets that sell by head size ( like AA ,jsb, h&n ); usually had a sticker on the bottom stating what's in the tin

 

[FL22]

Them pellets that sell by head size ( like AA ,jsb, h&n ); usually had a sticker on the bottom stating what's in the tin



View attachment 7089

I’ll check it when I get home . Hopefully the ones I just ordered from PA are the same. Probably not with my luck. ugh!!!

 

[Hateful McNasty]

Well as long as it's not like a midway pellet order and all tins lids pop off and your pellets are mixed together in the bottom of the box .. lol.

 

[FL22]

Well there is this...."In this HAM test, the HW95 air rifle developed Muzzle Energies between 13.3 and 15.5 Ft/Lbs" So it's comparable to the standard power TX

Yes sir, I dont think HW gives an advertised FPE.

 

[FL22]

Well as long as it's not like a midway pellet order and all tins lids pop off and your pellets are mixed together in the bottom of the box .. lol.

The ones I received from AoA had the new screw on lid .

 

[Hateful McNasty]

Forgot to had the h&n tin sticker


Seems these were 4.51 and .52 heads ?

Measuring them myself best I could figure is they may as well just put it hem in one tin and give up on the headsizing and pass that savings on to you ..lol

 

[Hateful McNasty]

Yes sir, I dont think HW gives an advertised FPE.

I guess it's what your gun does with any pellet . No guns the same it may be as advertised in a spec sheet or better or worse .. I just look at it as ballpark reference or a grain of salt ..

 

[FL22]

I guess it's what your gun does with any pellet . No guns the same it may be as advertised in a spec sheet or better or worse .. I just look at it as ballpark reference or a grain of salt ..

Yes, in the HW owner’s manual it says for pellet selection that “every rifle is an individual” and you have to find what pellet yours likes best.

Like you have said, you are lucky that yours likes cphp, I would venture to say that if it didn’t it would have a different home lol.