Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Airgun Repair Tools

PasadenaMike

Grand HAMster
3,390
1
9,363
Pasadena, CA
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Country flag
When I was a motorcycle technician I had to have the best of the best tools mainly snap on but this didn’t transfer to my new career as a commercial kitchen equipment technician , I can care less about my tools because let’s face it, tools get left behind so the cheaper the better. Now let’s talk about airgun repair tools. Do you go cheap or do you get good tools? I use Klein T handles, Pb Swiss hex keys, knipex circlip pliers, all non ball end hex keys, wheeler torque wrench….basically I care about my guns more than kitchen equipment lol
 
If the tools don’t strip out the heads on screws and bolts then it’s good enough for me. Don’t want to mar the finish on parts either.
 
They’re like gun smith screwdrivers?
Usually when saying gunsmith it's a hollow ground tip .. so yes .

Next week hing is brittle steel used and tips snap easy ... That one brand of gunsmithing drivers you see guys get that snapped tip with them .. in the end it's just a another one of them things thing with this stuff ..lol
 
You get what you paid for. I have gone through cheap, Chinese made tools that failed when I needed it so will only get quality, reliable tools now. Buy once cry once 🤣
 
I have found that in hex keys, you will save yourself some trouble if you use the best set you can find, especially in the smaller sizes. Project farm has some good YouTube reviews and tests of almost anything you can think of for the DIY person.
 
You get what you paid for. I have gone through cheap, Chinese made tools that failed when I needed it so will only get quality, reliable tools now. Buy once cry once 🤣
It's " you get what you pay for .... , and most times less" 😜.

Ya there's some times you can get away with cheap tool then there's times you can't ..
 
I have found that in hex keys, you will save yourself some trouble if you use the best set you can find, especially in the smaller sizes. Project farm has some good YouTube reviews and tests of almost anything you can think of for the DIY person.
Ya got to add the quality of the screw/bolt slot is made .. you could have the best Allen or whatever available but the fastener head is cheap and round out just as easy as the tool rounding off . Lol
 
Not bragging or endorsement but these impact bits been holding up great under me ( Milwaukee earthquake bits ? )
th-4090703042.webp

I've rounded or twisted or snapped a bunch before I just grabbed these out of desperation to find a good strong bit .. there doing the job great do far ..lol
 
Add a set of ball-end hex wrenches too. There's always a situation where these come in handy. Bondhus screwdriver type are nice. Get a set of dental picks to remove "O" rings. I also keep a couple of "T" pins to get the small chamber "O" rings out. Q tips. O ring lube. Plastic hammer. Padded jaw pliers and locking pliers. A good heat gun. Some leather and brass shim stock to wrap things when you have to grab them with pliers to prevent marking them. Blue Loctite, Thin metric wrenches to get into tight spots (Amazon). Ballistol lubricant. Moly paste. I could go on and on, but I"m sure you have most of this stuff.
 
I just bought my first "gun tools" that were not for my job, last month. Working with tools everyday I would have to agree that crappy tools are almost useless and will leave you stranded sooner than later and probably injure you in the process when they let go. Did spring for the torque screwdriver last month and it is nice peace of mind knowing my scope rings aren't gonna jump off or get overtightened!
 
I just bought my first "gun tools" that were not for my job, last month. Working with tools everyday I would have to agree that crappy tools are almost useless and will leave you stranded sooner than later and probably injure you in the process when they let go. Did spring for the torque screwdriver last month and it is nice peace of mind knowing my scope rings aren't gonna jump off or get overtightened!
I keep threatening to get a new one ( torque screwdriver). Never do . Had a husky from home Depot and let a buddy use it .. oops I mean keep it I guess seeing I never got it back ..lol.

I did notice last week looking around at that there's a lot more options on one now then even a year ago . Pretty nice affordable to. . Even some inlbs bicycle ratchet types at Amazon
 
i use the best of the best ALL my tool are name brand.
you dont have to use hollow ground screwdrivers you need to use the proper screw driver. dont use ball head allend to break a over torqued machine bolt loose dont over torque bolts little bolts big hands folks around here that want use a torque wrench are sent home. before i would hire anyone i would ask do you own a torqur wrench if you says no i dont bother calling your not one. : )
i am a stickler for things being correct i cant leep at night knowing there was short cut taken i am a extrem perfectionist extream even things that arnt seen ar by many dont matter it as to be correct.
i onw five large large roll around tops middles and bottoms if i dont own the needed tool i will rather i buy it or make i will.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top