Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

PORTABLE SHOOTING BENCH HOOMEBREW PROJECT... COMPLETED


The Portable Shooting Bench Homebrew Project I have been working on for almost 2 weeks is completed.

The Vinyl Edge Trim and the fancy Tacks arrived yesterday so I got busy finishing the edge and applying the tacks.

Now we will have to take it out, scratch it up, put some dents into it... and of course, shoot off of it.

Don
 

Attachments

  • SHOOTING BENCH COMPLETED   03-22-24  D4S.webp
    SHOOTING BENCH COMPLETED 03-22-24 D4S.webp
    454 KB · Views: 27
  • SHOOTING BENCH COMPLETED   03-22-24  D4S-2.webp
    SHOOTING BENCH COMPLETED 03-22-24 D4S-2.webp
    312 KB · Views: 26
I just use the regular folding legs for a full sheet of plywood to make a spare table but use a small piece of 3/4 ply with 2x2 down both sides to stiffen. Works ok
 
Well if you have a place for a permanent 1 go for it with concrete blocks they don’t move! Or if not go portable but things get heavy quick!
 
i have a couple set i have saved from old tables
not sure if i want to make one like that or somthing less movable?
Stuff like that gets removed before something goes in trash or burn piles .. got to scavenge the good stuff for future project usages..😉
 
That happens alot🤭....I'm wondering why you didn't post this in your original story about the table!? In any rate....slightly jealous! Let us know if u had to stiffen it up or it's good as is. 👍
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top