Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

New Hatsan Airguns At SHOT Show 2024

1706911402138.webp

As always, there were many new Hatsan airguns at SHOT Show 2024! Cecil Bays from Hatsan USA showed them to me, starting with the new Velox semi automatic PCP pistol shown above.

It’s also available in black…

HAM-Hatsan-1-6457185.jpg


The chunky-looking Velox is available in .177, .22 and .25 calibers with magazine capacities of 14, 12 and 10, respectively. The number of shots per fill “at optimal velocity” as the manufacturer puts it, is 22 in .177 caliber, 20 for .22 and 19 for .25 cal.

Muzzle energy peaks at 15 Ft/Lbs in the .25 cal version. Here it is from the other side.

New Hatsan Airguns At SHOT Show 2024


Then there was a new version of the Jet pistol. The Jet 2 QER is regulated and comes as a combo with a removable buttstock. There’s a shrouded barrel, integrated silencer and interchangeable, dual HPA cylinders.

New Hatsan Airguns At SHOT Show 2024


In close-up (below), it’s easier to see the flip-up peep rear sight.

HAM-Hatsan-5-5521371.jpg


Cecil also showed me a new version of the selective-fire Blitz. This has a larger, higher-pressure HPA bottle for more shots per fill. Other specs are slimilar to the current model.

New Hatsan Airguns At SHOT Show 2024


This new Blitz was labeled as the “777”, although Cecil was not sure this would carry-forward into full production. We’ll have to see!

HAM-Hatsan-4-9724826.jpg


The new Blitz is the lowest in this wall display of new Hatsan airguns at the 2024 SHOT Show, below.

At top is the new Factor Sniper Long. It certainly look very long! In fact, the length is 49.6 Inches with the stock fully extended. Intended for long range competition, the Factor Sniper Long is based on the Factor action that HAM readers first saw in our report from the 2023 IWA OutdoorClassics show in Germany.

Calibers are from .22 to .35 with power levels of up to 169 Ft/Lbs, Hatsan says, with the regulator set at 150 Bar (2,175 PSI). The price is $1,200.

HAM-Hatsan-9-2811188.jpg


The middle gun of the three above is the new Flash R QE. It’s a regulated version of the Flash with a sidelever action. Look for a price of around $300.00 for this one.

Then there’s the arrow launchers! Two new Hatsan airguns in this category are the Hydra Arrow (top in the photo below) and the Harpoon (below it).

HAM-Hatsan-8-6297752.jpg


Both are PCPs, of course. The Harpoon is a dedicated arrow launcher, while the Hydra Arrow is a version of Hatsan’s multi-barrel “system gun”.

I’m always amazed at the number of new product introductions that hatsan makes every year. It looks like 2024 is no different! You can find a ton of detail in the 2024 Hatsan USA catalog.


The post New Hatsan Airguns At SHOT Show 2024 appeared first on Hard Air Magazine.
 
Yeah, I don't plan on buying any other barrels for it as it will be my dedicated 177 pesting rifle. I'm sure I'll have to reduce the hammer spring tension and get it down to the high 800s. The other caliber barrel setups cost almost as much as the entire rifle! Lol. It says it gets 2 mags so that's 28 shots without refill which is perfect for grab and go!
Keep eyes peeled at hatsan on referb barrels deal and maybe try one .. they were a bit less and I would kinda assume there returns over that lineup pin thing and just fixed .. idk but ???....


Oh just to add..

Check overseas for non QE barrles as well. They seem to get the better stuff vs usa ..lol
 
Whoe.. it's now available ..


If I was to do one it be .22 plus this arrow launcher.. glad to see they got them back anyway..
 
Found him on eBay a few days ago and ordered already but thanks for helping. It's a little pricey at $40.00 but I couldn't find any others to choose from. Also ordered the DonnyFl A24 adapter to attach a standard moderator as I have many laying around. It's a fun project either way and I just hope I win the barrel lottery when it gets here tomorrow! You can unscrew the barrel shroud and a 1/2x20 moderator will screw directly onto the rifled barrel and it looks cool but no way to lock things together if you know what I mean. Any bump on the barrel using it like that and your POI will be off for sure. Thanks again HM!
 
Found him on eBay a few days ago and ordered already but thanks for helping. It's a little pricey at $40.00 but I couldn't find any others to choose from. Also ordered the DonnyFl A24 adapter to attach a standard moderator as I have many laying around. It's a fun project either way and I just hope I win the barrel lottery when it gets here tomorrow! You can unscrew the barrel shroud and a 1/2x20 moderator will screw directly onto the rifled barrel and it looks cool but no way to lock things together if you know what I mean. Any bump on the barrel using it like that and your POI will be off for sure. Thanks again HM!
Maybe... I think you'll be all right..

Good luck.
 
Last edited:
It was BJs custom on the barrel band.
I was looking at the new synthetic stock hydra.. it's promoed backwards from the wood one as the hydra arrow bit still uses and offers the 3 pellet barrels ..lol..

To me priced the same it be hard to choose synthetic over the nice wood one ..lol ( to me anyway ) ..

Now what I don't get is why did hatsan not kinda upgrade this newer hydra with the regulator like they did with the new flash for example ? Oh well.. ( and a lever instead of bolt as well)
 
I was looking at the new synthetic stock hydra.. it's promoed backwards from the wood one as the hydra arrow bit still uses and offers the 3 pellet barrels ..lol..

To me priced the same it be hard to choose synthetic over the nice wood one ..lol ( to me anyway ) ..

Now what I don't get is why did hatsan not kinda upgrade this newer hydra with the regulator like they did with the new flash for example ? Oh well.. ( and a lever instead of bolt as well)
Agreed, regulator would have been sweet for sure. Synthetic would be lighter but it would be like the Avenger all creaky and such. My Avenger has been at Air Venturi for three weeks and they haven't even started on it yet and I have sent over 10 emails inquiring about it and they are just too far behind to get to it. My Dar Gen 3 25 cal went to Aim Sports in California and back in ten days flat when it quit working as well. All I can do is wait!
 
Agreed, regulator would have been sweet for sure. Synthetic would be lighter but it would be like the Avenger all creaky and such. My Avenger has been at Air Venturi for three weeks and they haven't even started on it yet and I have sent over 10 emails inquiring about it and they are just too far behind to get to it. My Dar Gen 3 25 cal went to Aim Sports in California and back in ten days flat when it quit working as well. All I can do is wait!
Ouch !! ...🤤
 
Goofing around at hatsan I seen there colored stock guns in flash and flash pup .

Now I got to wonder if this latest regulated flash will be available in one ..

Think they were od , brown , green camo look and brown camo look.. kinda looked a bit better then stock black synthetic..🥴
 
Last edited:
The Velox is definitely on my list of airguns to buy this year! I currently own the Sortie, Invader and Flash Pup, Bullpup in wood. These Hatsan products have run flawlessly for me. People who complain about their reliability and quality either don't own them or are airgun snobs. Regardless I'll continue to enjoy my Hatsan guns and laugh at all the whining.
I've got the Invader in 25 caliber and it's dead on accurate at 30 yards. It's worked flawlessly over the last year but it's too heavy for my bad back to carry around in the field so I use it as a bench gun only. Squeezing off 10 rounds in about 3 to 4 seconds is very gratifying!
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top