What'cha doing air gun related today?

[912Airguns]

A little grouping

 

[Hateful McNasty]

Might give the trans fluid a try. The Mrs. HATES the smell of Ballistol. Lol

The thing is getting your rag saturated just right to give a nice thin coating of the skirt and head .. you don't want to us too much or get lube inside the skirts. Why once I get my lube rag saturated lightly I just need to add a drop or so as I go as needed . I don't explain stuff well without hands on show and tell to example things ..lol

Lube rags in there container


Dry Papertowls folded in sour cream type container then swirl around and refresh paper towels as needed ( tip.. paper towels sheets can be dried out for reuse to )

 

[Hateful McNasty]

A little grouping


View attachment 6478

Little groupings are nicer then big groupings in my book

 

[Danman]

Well thanks guys for helping me swallow the higher cost of the Jsbs... I do think that is part of the cost right there, the pellet cleanliness. I am staring at 2 empty JSB .22 tins now from the S510 and there is almost zero lead bits left! The Crosmans tin that's different, plenty of debris. It rained today mostly so I pulled out ALL my pellets and checked what I have and what I still need (wife gave strange look). I have kept my .177 collection under control but my .22 pellets I'm still experimenting! D&L has some H&N pellet sales goin on so I am gonna buy a few tins that I loved from the sample packs. (The lightweight Tin ones, Hornets, and Barracuda Hunters were extremely accurate) Hard No on the crow magnums they are basically a H.P. wadcutter and go sideways very quickly!!

 

[Dogowski]

Might give the trans fluid a try. The Mrs. HATES the smell of Ballistol. Lol

Same here man! My wife can't stand the smell of Balistol.

 

[Florida_Man]

Same here man! My wife can't stand the smell of Balistol.

Mine also. I have to use it in my shed or outside.
I recently saw first hand the ability of balistol. I cleaned some 1911 mags with it. I left them on a table outside and we had a pop up shower. I go out to dry them off and reapply. The water was beading right off of them. I dried, reapplied then put them back in storage.

 

[Hateful McNasty]

Checking today's email alerts and these guys never seem to get one to me on time .. lol... All come after the sale date expired .



Maybe a world time zone thing ???

 

[Hateful McNasty]

Well... I'd never of just bought these daisy hp pellets unless a out of stock on anything else " better". Afte a good cleaning been pretty good especially at $6.40 a 500 tin

The R9 , First 5 @ 50y @x4




Sadly not in town local sold , but hay... They got plenty of them crappy pointed daisy .. lol, go figure

 

[Florida_Man]

I worked on my S200. There may have been too much moly grease. The cocking arm is sticking in the back position.
While it was apart I also installed a Rowan barrel band.

I put 10 10.3 gr through this hole at 10m

 

[Quiet Veteran]

Getting ready for airgun infuse match in Georgia next Saturday

912Airguns , Where in Georgia ? My free Google searches have not been very helpful for events near my town of North Augusta SC

 

[Dogowski]

Well... I'd never of just bought these daisy hp pellets unless a out of stock on anything else " better". Afte a good cleaning been pretty good especially at $6.40 a 500 tin

The R9 , First 5 @ 50y @x4

View attachment 6491
View attachment 6492

Sadly not in town local sold , but hay... They got plenty of them crappy pointed daisy .. lol, go figure

All pointed pellets are useless out of all the caliber airguns I have!

 

[Farmplinker2]

Shot a clip out of the M4-177. 3 pumps, and pop cans jump nicely at 10 yards.

 

[Hateful McNasty]

All pointed pellets are useless out of all the caliber airguns I have!

Now the crosman field point ( I call them semi-domed) do pretty good for me.

Like said I think they look more domed then pointed ( semi -domed) and shoot well

These type , more rounded


Not these sharp pointed

 

[Hateful McNasty]

Pretty sticky morning kinda blaaa with breeze. ( A.C feeling good already ..lol)

R9 , stock irons, 50y, daisy hp .177

1 o'clock hole was a preme trigger pull/ oops. Lol



Ya, between the black box daisy flathead/ wad and these hollow points I got pretty good results for a don't break the bank pellets .. do far better then I would of expected without trying them ..

 

[Florida_Man]

I put a 2250 buck rail part together. 14.3gr @ 480 fps. Perfect agama gun.

 

[Hateful McNasty]

Well that tin did not last long ..lol

Looking back I may even say these daisy did as good or slightly better then cphp.

I sure did not seem to have a the flyers / them crosman that one that spoils the grouping ..lol

Maybe being a new thing to try I may of tried harder instead of the everyday la de da mondaine cphp. Ijdk ..lol

Ya, the daisy hollow point I will buy again if I find them in a store somewhere.

This morning coffee sipping first shots, stock irons, 6 o'clock target hold , 50y , R9 , dhp.177 ... Can't complain I guess





P.s .......
Maybe daisy getting in with crosman could help make the cphp better ..

 

[Danman]

Well that tin did not last long ..lol

Looking back I may even say these daisy did as good or slightly better then cphp.

I sure did not seem to have a the flyers / them crosman that one that spoils the grouping ..lol

Maybe being a new thing to try I may of tried harder instead of the everyday la de da mondaine cphp. Ijdk ..lol

Ya, the daisy hollow point I will buy again if I find them in a store somewhere.

This morning coffee sipping first shots, stock irons, 6 o'clock target hold , 50y , R9 , dhp.177 ... Can't complain I guess

View attachment 6548

View attachment 6549

P.s .......
Maybe daisy getting in with crosman could help make the cphp better ..

I hope my (future) retirement coffee breaks looks like yours!...the Benjamin single dies just hit Canada, might have to try them to! They have been 'tumbled longer' it says so should be decently clean. Nice results with a cheap pellet is always good...now you will have to retry against the crosmans As soon as the doubt sets in you have to retest....I've been there...often.

 

[Hateful McNasty]

I hope my (future) retirement coffee breaks looks like yours!...the Benjamin single dies just hit Canada, might have to try them to! They have been 'tumbled longer' it says so should be decently clean. Nice results with a cheap pellet is always good...now you will have to retry against the crosmans As soon as the doubt sets in you have to retest....I've been there...often.

Ya, I see tumble wash,rince, dry,lube does / helps the most really knocks the trash off and smooths the casting marks . I do see a difference between the out of tin as is vs ones I prep.

 

[Florida_Man]

I found I am getting some reg creep on my S200. The initial shot was low, then I took an hour break after the first 50 shots, came back and had a low number.

	Velocity	FPE
1		0.0	73​
2	723​	12.2				Rifle
3	709​	11.7				Projectile Grain	10.5
4	711​	11.8				Pellet Name
5	709​	11.7				Average	715.925
6	709​	11.7				SD Dev	6.079171746
7	716​	12.0				ES	32
8	713​	11.9
9	712​	11.8
10	710​	11.8
11	711​	11.8
12	711​	11.8
13	710​	11.8
14	711​	11.8
15	711​	11.8
16	708​	11.7
17	712​	11.8
18	713​	11.9
19	716​	12.0
20	711​	11.8
21	714​	11.9
22	713​	11.9
23	713​	11.9
24	717​	12.0
25	717​	12.0
26	713​	11.9
27	713​	11.9
28	713​	11.9
29	717​	12.0
30	715​	11.9
31	716​	12.0
32	713​	11.9
33	714​	11.9
34	716​	12.0
35	716​	12.0
36	714​	11.9
37	717​	12.0
38	711​	11.8
39	720​	12.1
40	715​	11.9
41	718​	12.0
42	715​	11.9
43	716​	12.0
44	715​	11.9
45	720​	12.1
46	715​	11.9
47	715​	11.9
48	712​	11.8
49	712​	11.8
50	715​	11.9
51	701​	11.5
52	716​	12.0
53	708​	11.7
54	715​	11.9
55	718​	12.0
56	716​	12.0
57	716​	12.0
58	717​	12.0
59	715​	11.9
60	713​	11.9
61	713​	11.9
62	712​	11.8
63	714​	11.9
64	714​	11.9
65	717​	12.0
66	716​	12.0
67	716​	12.0
68	716​	12.0
69	725​	12.3
70	727​	12.3
71	728​	12.4
72	733​	12.5
73	726​	12.3
74	733​	12.5
75	733​	12.5
76	733​	12.5
77	724​	12.2
78	726​	12.3
79	725​	12.3
80	720​	12.1
81	712​	11.8

 

[Hateful McNasty]

No pcp guy but seems you got pretty consistent 69 shots .. thing I thought was odd that after that your cylinder pressure is lower then at start but a increase in fps .. I'd figured the fps would be dropping