What did you buy/receive today?

[Madhatter]

Wes is awesome!

It was released from customs so should get it soon. Forgot I'd ordered 4 tins of H&N .22 14.66 grain pellets from hatsan. They charged my card but never even bothered to send me a email confirming the order. I don't know what's going on with it. You know, I don't care how cheap they're selling stuff I've had it with them. I never did get the right tail plug for converting my 135 to spring power. They ended up sending me 2 end plugs for a 125 which I have no use for.

 

[Zelos1]

It was released from customs so should get it soon. Forgot I'd ordered 4 tins of H&N .22 14.66 grain pellets from hatsan. They charged my card but never even bothered to send me a email confirming the order. I don't know what's going on with it. You know, I don't care how cheap they're selling stuff I've had it with them. I never did get the right tail plug for converting my 135 to spring power. They ended up sending me 2 end plugs for a 125 which I have no use for.

Sorry to hear about your trouble.

 

[PapaT]

It was released from customs so should get it soon. Forgot I'd ordered 4 tins of H&N .22 14.66 grain pellets from hatsan. They charged my card but never even bothered to send me a email confirming the order. I don't know what's going on with it. You know, I don't care how cheap they're selling stuff I've had it with them. I never did get the right tail plug for converting my 135 to spring power. They ended up sending me 2 end plugs for a 125 which I have no use for.

That's frustrating. All I ever order from them I the pellets, but have had good success with that. They did promote me not ordering at least once because their "freeship" weekend code wasn't active despite the daily emails saying so.

 

[Madhatter]

Well it seems their shipping department got lazy and never sent out anything about the pellets being shipped. Of course the sales department never sent me a email saying they received my order. I received the pellets today. They were packaged very well so alls well that ends well I guess.

 

[PapaT]

Well it seems their shipping department got lazy and never sent out anything about the pellets being shipped. Of course the sales department never sent me a email saying they received my order. I received the pellets today. They were packaged very well so alls well that ends well I guess.

Glad it worked out. I went to order pellets and realized they don't carry the Baracuda 8s I wanted, so

 

[Rwjeter]

I received my Vortex Pro 34mm High rings and mounted up the Venom today. Just barely clears, but, it clears!

By the way, shout out to @High Pressure for great customer service! Tom called me to let me know he was keeping it one additional day just to chrono it, pressure test it, and be 100% it was in prime shape and ready to go. Even with the delay it was shipped really fast.

 

[Jaabaa]

The stuff from Defence Innovation has been delayed till tomorrow

 

[duchunter007]

Received my 18 inch pounds, Fix-it Sticks Torque Limiter for working on scopes, and Eagle Vision scope rings from a fellow member of HAM

 

[Murfdurf82]

The last few purchases showed up. Scott 30 min tank, another factory air tube for the notos. Air tube extension tomorrow. I'm going to have a 65-70cc plenum and 130??cc from the air tank. I have until tomorrow evening to pump my tank up for a short trip to the family farm. After I'm back I'll review my single piston water cooled tuxing compressor.

 

[Jaabaa]

They are both of heavy plastic metal material.
Full sized. Will try them out and report this week.
Having a couple teeth pulled and bridge put in, so I'll be slow the next few days.

 

[Zelos1]

The last few purchases showed up. Scott 30 min tank, another factory air tube for the notos. Air tube extension tomorrow. I'm going to have a 65-70cc plenum and 130??cc from the air tank. I have until tomorrow evening to pump my tank up for a short trip to the family farm. After I'm back I'll review my single piston water cooled tuxing compressor.

OOOh! Water cooled? I will be very interested to hear how many hours you get out of that. I went “low buck” and bought a 3 year warranty for $27.00. Are the Tuxings faster than the air cooled units? That would be a big plus.

 

[Murfdurf82]

OOOh! Water cooled? I will be very interested to hear how many hours you get out of that. I went “low buck” and bought a 3 year warranty for $27.00. Are the Tuxings faster than the air cooled units? That would be a big plus.

I'm curious, I tried to fill my Max 1 and the compressor was ahead of the pressure tank by 500-700 psi. It was ahead of the my Nova liberty by 300 psi. It's going through the magnetic gx filter and the in line filter it came with. At 5 pm I started filling the Scott 30 minute tank from empty. I'm monitoring as we speak. I have it hooked to a 6.5 gall. Cabela bucket w distilled water. 5 gallons of water pumping minimum so that's what I have to start....Edit:the gauge on the tank fill adapter is new and it's accurate, with the 3000 psi MSA tank I have, the spiritech compressor which pumps way slower read accurate and wasn't from the gx filter once it went past 1000 psi and the filter opened up to the tank.

Filling Scott 30 min 4500 psi tank 1st time In a basement where temp is 55°F
5-525pm 0-1300 psi.
53°f to 113°f (guage on pump)

6-620 pm 1300-2600 psi. Compressor guage reads 4-500psi above Scott tank gauge and fill guage
77°f to 123°f

7-718 pm 2600-3900 psi Comp gauge shut off at 4300 while the 2 others read 3900-4000.
Added 1 gallon of 53° water to bucket, cooling it 4 degrees(6 gallon total) 77°f to 125°f.

Will attempt to top off tomorrow. I ran a fan directly in front of the compressor to help keep cool and I could tell it helped. In the hotter months a 10 gallon holding tank and a higher flow pump I think will be a smart investment.

 

[Mike Brown]

WOW!! Where is that little slice of heaven? I think we need something like that around the Tacoma area.

I couldn't agree more!! About 35 or 40 years ago there was an airgun shop that opened up on So.Tacoma Way just south of south 56th street. Had all sorts of high end airguns that I didn't even recognize but the fanciest airgun I had at the time was my Beman C1. Don't know how long it lasted but obviously ahead of it's time. Sure wish it was still there.

 

[PapaT]

Received replacement adapter for my M4-177 from buck-rail. The first one broke trying to install. I will be doing some sanding first, to make the tolerances less tight for the poor thin printed parts.

 

[Jaabaa]

Received replacement adapter for my M4-177 from buck-rail. The first one broke trying to install. I will be doing some sanding first, to make the tolerances less tight for the poor thin printed parts.

That's what problems I've had with is the adapters have broken. They refund or replace very quickly.
I time I posted on YouTube before I was going to call them and they had the refund already done before I called and sent a new one out a day or so later.
Have had drill out the Moderator kept clipping, but it works well

 

[Madhatter]

Still waiting for the digital pressure gage for Canada. I tried tracking it on the Canadian postal service but it won't come up.

 

[Zelos1]

I couldn't agree more!! About 35 or 40 years ago there was an airgun shop that opened up on So.Tacoma Way just south of south 56th street. Had all sorts of high end airguns that I didn't even recognize but the fanciest airgun I had at the time was my Beman C1. Don't know how long it lasted but obviously ahead of it's time. Sure wish it was still there.

I have gently pestered sportco in Fife a couple of times. They have enough space and could have a couple of 25yd indoor lanes as well. I think that it would also be a nice boost for their accessories sales and gunsmiths might stay busier.

 

[PapaT]

Took advantage of the st. Patrick's Day sale from PA to get 5 new steel targets and 4 more tins of Baracuda 8s for my Vapor Max (not discounted additional, but order was free shipping).

 

[duchunter007]

I have been saving some of my Cabela's gift cards, and finally bought a Tricer HK Tripod, which arrived today, now going to order the the AK ball head next couple weeks.

 

[Murfdurf82]

My friend down here where I'm traveling is getting a break barrel from me, soooo since I "sold" a rifle I planned on buying another one. I was just Trying to apply the discount on PINTY web site(in the cart it linked to "shop" app) the buy now button is just below the discount spot and I accidentally (it really was an accident) touched the buy it now. The vehicle going over a bump made it happen....now I didn't get the 15% coupon as it wouldn't let me and now I have a Pinty Buster .22 paid on pre-order . I really only wanted it w the discount.