Others Single or Rotary feed…need to test some more.

[TomTN]

Thank you to the ones that gave tips and input the other day.

Single fed was wide open other than the last group top with a flyer.

Shot a string of three groups with 5 per. Top single feed and bottom rotary mag. Really did notice the ones that fed ruff and the ones that fed smooth from the mag. Bottom right was just a bad group and getting worst so stopped. Looked and was at 190 bar, wish I had been shooting through the crony with this test.

The bottom center felt good loading 5 with no sticky feel and can tell the difference it made by the group.

Thinking about resizing all pellets before hand from now on. I know some may think over kill but to me this is the fun part of shooting. The ones I had left that was separated by weight made some great groups at 30 and 50 so fixing to take this new tin of JSB’s and sort them out for tomorrow.

 

[Florida_Man]

The hang ups during the loading process are something I’m going through with my PP750. They are more frequent when using a magazine, but they still occur with both single shot loading trays I use. My plan is to polish everything up and see if i can get it to go away. It’s about 1 in 50 shots I notice it in SST, a little more often using magazines.
Next time I take it apart the transfer port area will be thoroughly de burred and polished.

I’ll be trying these on the inside.

https://a.co/d/0M88gGg

 

[Florida_Man]

As for pellet weighing and sizing, that might happen again when my kid is older or I’m retired with plenty of time.