Northeastbeast
HAM Sniper
Last edited:
Ever seen a 3k dollar plus Zelos??? 
Well hear ya go
Started life as a basic 25 caliber out of box Zelos. That didn't last long. I never even shot it in its factory form. Started by stripping it down completely and going through all the orings. Porting the block to as large as it can go safely, added a C88 plenum, Paul Demburger power valve & heavy hammer spring. 800mm Fx heavy liner. Ergo air target style grip. Heartland airguns trigger gaurd & long arca rail. Tuned trigger for a crisp 2 stage break (under a pound) added a bravo3d trigger shoe. C88 short throw side lever, Then to add insult to injury
i Topped it with a Sightron S8 5-40x56 
Why you may ask??? Why not I say... I always have fun turning these budget guns into Gucci guns. This rifle is capable of 150 foot pounds of energy. Yea you read that right thats not a typo. Im planning to finally Tune the rifle. Stay tuned for a full breakdown video of the build and the tune over on 802_airhead on youtube. Going to tune it for Zan ELR slugs. Got some of Zans 61gr & the super rare 49gr ELR slugs. I am really hoping the 61gr are a fit so I can take this bad boy out to 300 yards and beyond. Also waiting on the new 25 caliber Zan ELR hollow points.
The goal this summer is to touch steel at 1k yards with as many of my air rifles as possible. The Zelos hopfully can reach this goal. What an out of this world achievement right? A zelos hitting a target at 1k yards.
The shroud on it is for a 700mm set up. I have parts coming to remedy the gap and put a full size carbon fiber shroud on the rifle to complete its look. May add a plenum extension as well.
That's the very first RogueAir Modz the last air bender moderator on there as well.
What do ya think???
Well hear ya go
Started life as a basic 25 caliber out of box Zelos. That didn't last long. I never even shot it in its factory form. Started by stripping it down completely and going through all the orings. Porting the block to as large as it can go safely, added a C88 plenum, Paul Demburger power valve & heavy hammer spring. 800mm Fx heavy liner. Ergo air target style grip. Heartland airguns trigger gaurd & long arca rail. Tuned trigger for a crisp 2 stage break (under a pound) added a bravo3d trigger shoe. C88 short throw side lever, Then to add insult to injury
i Topped it with a Sightron S8 5-40x56 Why you may ask??? Why not I say... I always have fun turning these budget guns into Gucci guns. This rifle is capable of 150 foot pounds of energy. Yea you read that right thats not a typo. Im planning to finally Tune the rifle. Stay tuned for a full breakdown video of the build and the tune over on 802_airhead on youtube. Going to tune it for Zan ELR slugs. Got some of Zans 61gr & the super rare 49gr ELR slugs. I am really hoping the 61gr are a fit so I can take this bad boy out to 300 yards and beyond. Also waiting on the new 25 caliber Zan ELR hollow points.
The goal this summer is to touch steel at 1k yards with as many of my air rifles as possible. The Zelos hopfully can reach this goal. What an out of this world achievement right? A zelos hitting a target at 1k yards
.The shroud on it is for a 700mm set up. I have parts coming to remedy the gap and put a full size carbon fiber shroud on the rifle to complete its look. May add a plenum extension as well.
That's the very first RogueAir Modz the last air bender moderator on there as well.
What do ya think???
