Pinty Buster 3D printed removable brace

[non3]

I finally managed to put together several designs to make a removable stock for the Buster.
The brace was straight, used a heatgun to bend it in the middle.
There is a picatinnny rail installed on the bottom of the grip, using M4 screws.
The brace has a quick release picatinny clamp attached.
All parts are 3D printed and the designs are online.
If anyone is interested I will add the links to the 3 STL files for: brace, picatinny rail, picatinny clamp.

 

[non3]

Now that I have a brace, I replaced the dot sight with a scope.
My Buster seems very accurate with cheap pellets at 20 yards, 1/2" groups (or less) off an improvised bench.

The brace is solid, no wiggle.
It can be added/removed in 10 seconds.