250Z New Barra replacement barrels arrived !!!

[PestPlasteringPlinker]

Feb. 9th, so I am waiting... Sucks.. If I ever receive my gauges from Sekmet.... Then maybe if ever gets to 50F, I will walk down the block and play a bit.. It is a different gun with the few upgrades Hammer weight and spring, valve opened a bit and trigger kit.... And a plenum!!!
Forgot again! Also Buck Rail Mod stock....

Is there a reason youre waiting for 50 degrees? I mean, its iced roads outside here, and I am tuning my 250z. I totally get a comfort issue, because man, its cold, and a one and done side, because the warmer weather of summer and im going to have to adjust things.

I am just curious as to the effect under 50 has on these rifles?

 

[cosmic]

I am just waiting for warmer weather since it is below zero here now!!!! I don't think a tune would change that much during cool weather, unless the reg is gunked up... I think my recovery is 6 weeks...

 

[PestPlasteringPlinker]

I am just waiting for warmer weather since it is below zero here now!!!! I don't think a tune would change that much during cool weather, unless the reg is gunked up... I think my recovery is 6 weeks...

Oh holy hell nah!!!! That is cold! I thought i had diamond pasties plinking around for a couple hours yesterday at 34 degrees, but it was so clear and sunny, I couldnt not at least pull out the z and plink. I got to dial it in before I bust it out on the farm and stretch its legs proper.

At 0, id look like Ralfies brother in 'a Christmas story', except shooting something more fun than a red ryder.

Todays weather is looking to be the same, so now, im on to trial run the 2505 that I have left, and see what those can muster up! I can't wait for the warmer weather though!

 

[Dogowski]

Oh holy hell nah!!!! That is cold! I thought i had diamond pasties plinking around for a couple hours yesterday at 34 degrees, but it was so clear and sunny, I couldnt not at least pull out the z and plink. I got to dial it in before I bust it out on the farm and stretch its legs proper.

At 0, id look like Ralfies brother in 'a Christmas story', except shooting something more fun than a red ryder.

Todays weather is looking to be the same, so now, im on to trial run the 2505 that I have left, and see what those can muster up! I can't wait for the warmer weather though!

Can't wait for the warmer weather either brother as it's 8 degrees here with a foot of snow. I'm too old for this stuff!

 

[cosmic]

I know what you mean at 72 years old... Snowing now and a half a foot on the ground and I am not allowed to shovel!!!

 

[Dogowski]

Is there a reason youre waiting for 50 degrees? I mean, its iced roads outside here, and I am tuning my 250z. I totally get a comfort issue, because man, its cold, and a one and done side, because the warmer weather of summer and im going to have to adjust things.

I am just curious as to the effect under 50 has on these rifles?

Can't be good on the oring seals especially the regulators as they won't recover quickly from shot to shot. I'd think they would be ok at 50 degrees it's 32 or lower that would be hard I think on a pcp rifle. I use the reg butter on all my regulated guns to help them recover smoothly so that helps.

 

[Dogowski]

I know what you mean at 72 years old... Snowing now and a half a foot on the ground and I am not allowed to shovel!!!

Heal up and no strenuous activity man! That snow is for the younger people to shovel, right?

 

[PestPlasteringPlinker]

Can't be good on the oring seals especially the regulators as they won't recover quickly from shot to shot. I'd think they would be ok at 50 degrees it's 32 or lower that would be hard I think on a pcp rifle. I use the reg butter on all my regulated guns to help them recover smoothly so that helps.

Yeah, that was a high priority, once I realized id be doing multiple tear down, tweak, and reassemble. Saves the orings for sure.