Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Break Barrel My HW95's Chrono Results

dunz

HAM Sniper
258
964
HAM Points
1,523.50
Country flag
Below are some readings I took today. These numbers are from a new (only ~150 pellets shot so far) stock HW95 in .20 cal.
Pellet FT-Exact 0.20 (13.73 gr)
Nice 72 deg day
1737937422465.webp
Not sure I know enough to be able to tell anything or draw any conclusions from these numbers. Energy level seems to be on par with published specs. Is this a large enough sample size?
 
Below are some readings I took today. These numbers are from a new (only ~150 pellets shot so far) stock HW95 in .20 cal.
Pellet FT-Exact 0.20 (13.73 gr)
Nice 72 deg day
View attachment 11149
Not sure I know enough to be able to tell anything or draw any conclusions from these numbers. Energy level seems to be on par with published specs. Is this a large enough sample size?
Here’s some information that HatefullyMcnasty gave me.

IMG_2530.webp
 
Last edited:
My stock .177 cal HW95 shot 10.3 grain pellets at 780 fps, if that's any help. 8.4s whistled out at 896 fps. After installing a Vortek HO kit with one coil cut off the spring, it shoots 10.3s at 802 and 8.4s at 920.
 
Back when I had my R9 .20s I believe they were shooting in the 710fps range with the 13.65gr pellets, been a long time so may be off a bit. Both guns were tuned. I do know they were Pigeon/Starling killing machines though.
 
Ran a few more chunks of lead through the chrono today to see how everything is holding up; results look very similar to the first set of results and the rifle is shooting well. /cheers 🍻

Capture.webp
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top