I sent my barrel and action to Ailen Airguns. Wayne ported, polished and drilled leade in for riflings on barrel. He increased valve to 7mm and installed a 8mm peek poppet with a heavy hammerspring and a light valve spring. He removed factory plenum ceiling and installed 25cc plenum. I installed a trigger from AESWEDE as well as his shortened carbon fiber shroud with his bottle bands. I installed a 700cc carbon fiber bottle with a Ninja high pressure regulator, so gun is dual regulated. The scope is a Monstrum G2 6-24 x 50 and the tripod is a Talon Tunes carbon fiber custom. The chasis is from Termidator which I painted to my liking and features a folding stock for easy hammerspring adjustment.
I have only shot it to 50 yard thus far and its a laser. At 2400psi on reg and 1 1/2 turns in on hammerspring i was averaging 52fpe @ 840fps. As you can see in pics, after clearing bullseye, i started shooting 12, 3, 6 and 9 on the targets. Very accurate at 50 yds. Tommorrow im gonna take it out to the family farm and crank up the reg to see what she'll do. Im sure i can get 60fpe out of this rifle. I will post final results. Here is what i have at 50 yds. Using 25.39 Jsb pettets. I have some 33.95 JSB pettets and some 40gr Varmitknocker slugs to try at farm. Should be a whole lotta fun
I have only shot it to 50 yard thus far and its a laser. At 2400psi on reg and 1 1/2 turns in on hammerspring i was averaging 52fpe @ 840fps. As you can see in pics, after clearing bullseye, i started shooting 12, 3, 6 and 9 on the targets. Very accurate at 50 yds. Tommorrow im gonna take it out to the family farm and crank up the reg to see what she'll do. Im sure i can get 60fpe out of this rifle. I will post final results. Here is what i have at 50 yds. Using 25.39 Jsb pettets. I have some 33.95 JSB pettets and some 40gr Varmitknocker slugs to try at farm. Should be a whole lotta fun
