ernroe
HAM Sniper
I have an Armada and an extra Marauder stock and don't particularly like the tac look of the Armada. Can I transfer the Armada action to the Marauder stock?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
@BenjeneerJohn is 110% the best person to answer this. I'm sure he will chime-in soon...There are posts about this all over. Seems that the difference is that the armada receiver is picatinny and marauder is dovetail. The difference in the rifles is really just the furniture. A gen 2 marauder stock should bolt right up. Probably easy to get a decent amount for the take-off stock too…
I hope so because , like always, I have a few more questions.@BenjeneerJohn is 110% the best person to answer this. I'm sure he will chime-in soon...
As always my situation is a little different. I bought the Armada used and someone had put a Huma Regulator on it. I am not sure how to get the stock off with the regulator in place.As long as your Marauder stock is for an unregulated action, they are 100% swappable.
The Armada is unregulated only where the Marauder comes regulated and unregulated.
John
Can you attach a few pictures of what the issue is? I am sure we can help you out.As always my situation is a little different. I bought the Armada used and someone had put a Huma Regulator on it. I am not sure how to get the stock off with the regulator in place.
Thx, I have attached a2 photos that I think will help. On a factory stock Armada the is a set screw that holds a bracket in place but the regulator installation replaced that bracket. There is a hole there but no set screw. I appears as if designed for a probe. I am being cautious because I don't have any experience with this gun. See below.Can you attach a few pictures of what the issue is? I am sure we can help you out.
John
We use essential cookies to make this site work, and optional cookies to enhance your experience.