EVOL Help with a leak

[Madeintheuk]

There is no need to remove the barrel shroud. Only the barrel assembly. You cannot remove the air tube without removing the barrel first. The barrel unscrews directly from the Bree h block as an assembly with the shroud. A tool is needed to remove it though. I would advise buying the tool if you own one. Just for maintenance.

 

[Woogie_man]

You can remove the air cylinder without removing the barrel....it is just a pain in the butt. If you don't have the tool a strap wrench or some pins in the collar holes will help remove the barrel

 

[Jessairz]

You can remove the air cylinder without removing the barrel....it is just a pain in the butt. If you don't have the tool a strap wrench or some pins in the collar holes will help remove the barrel

Thanks for your reply.