Others Got the YH fixed

[Chief 10-Beers]

Well,' I finally got around to fixing the YH. It somehow got a small slit right inside the Bend of the Opper Tube. I had thought about sending it back unser warranty but I went ahead and just ordered a New Tube. I put it on today, and it worked like a Charm. Got My Bottle back to 3000! Now I don't have to be so Chincy with My Air. lol

 

[CTAirgunner]

Well,' I finally got around to fixing the YH. It somehow got a small slit right inside the Bend of the Opper Tube. I had thought about sending it back unser warranty but I went ahead and just ordered a New Tube. I put it on today, and it worked like a Charm. Got My Bottle back to 3000! Now I don't have to be so Chincy with My Air. lol

I have been running mine for 4 years now, with 1 year break of not running. I did rebuild both stages 2.5 years ago, anywho, fired it up for the first time after no running for a little over a year, thing runs like a top. 3000 Psi - 4400 Psi in less than 15 minutes.

 

[Chief 10-Beers]

Love to Hear it! I bought mine only about 8 months ago I think. I also bought the extended warranty just in case. I only use it to fill my Carbon SCBA tanks, so it doesen't get a lot of use. I Only hope Mine lasts as long as yours does!

 

[CTAirgunner]

Love to Hear it! I bought mine only about 8 months ago I think. I also bought the extended warranty just in case. I only use it to fill my Carbon SCBA tanks, so it doesen't get a lot of use. I Only hope Mine lasts as long as yours does!

I recommend running Seca Lube 500, its a twin screw compressor lubricant , I do believe thats the key to the longevity of mine. To be honest, at 28 dollars for both stages, it would be worth rebuilding once a year, its pretty straight forward and simple.

 

[Chief 10-Beers]

I recommend running Seca Lube 500, its a twin screw compressor lubricant , I do believe thats the key to the longevity of mine. To be honest, at 28 dollars for both stages, it would be worth rebuilding once a year, its pretty straight forward and simple.

I am sure that I would have to order it to get it. My Locale is very sparse for certain Items. I am currently using Husky "Full Synthetic Non Detergent Compressor Oil." I have very few hours on it yet, and Have enough for another Change after the Break in is done. I will look to see where to get that oil from. The Husky was recommended from people on AGN, and it was all that was available in My area from Home Depot. Thanks again for the Tip!

 

[Chief 10-Beers]

On another note, how long do you run your YH compressors for? I make sure that I have plenty of cold water, and the temps rarely reach the upper 40's. Also, do you use Coolant in the water?