Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Panthera Fx King is in the house! yeah I know ......

Sitting here watching tracking of my Huma parts.

I did get a new set of rings for the Tract, I also talked to Orion and he is going to swap out the mags for the 12 rounds instead of the 17 rounds. Though of course the same day I sent the mags back, the rings show up...... and wouldn't you know it the scope and standard mags would have fit!

Playing with the Tract for long range and also going to look at putting the HS635R thermal on the rifle. Use it for some hunting and fun.
 
Woogie_man said:
Sitting here watching tracking of my Huma parts.

I did get a new set of rings for the Tract, I also talked to Orion and he is going to swap out the mags for the 12 rounds instead of the 17 rounds. Though of course the same day I sent the mags back, the rings show up...... and wouldn't you know it the scope and standard mags would have fit!

Playing with the Tract for long range and also going to look at putting the HS635R thermal on the rifle. Use it for some hunting and fun.
Click to expand...
The Huma reg is insane! I shot 12 Air Marksman 42gr slugs today, all the same 975fps, no spread, nothing to figure out. Nice!
 
Its not the regulator I am waiting for.... I have the caliber change kit coming from them.

Though knowing me I am sure I will be getting the regulator at some point as well.


Was talking with Utah and see that the Belly Dump rail will work on the rifle. So if I don't like the saber chassis I am going to go back to the standard stock and probably end up selling the saber. And then giving the rifle some "character" or some kind ;)
 
FINALLY have shipping data on the barrel kit and probe! Shows that they should be dropped off at the house on Tuesday. So once they get here I will rip the rifle down and swap things over from a 25 caliber rifle to a 22 caliber rifle.

Talked with Orion and he is getting the mags sent out tomorrow so those should be here shortly as well. I may have to borrow a mag from my buddy to get some shooting done until then.
 
Woogie_man said:
FINALLY have shipping data on the barrel kit and probe! Shows that they should be dropped off at the house on Tuesday. So once they get here I will rip the rifle down and swap things over from a 25 caliber rifle to a 22 caliber rifle.

Talked with Orion and he is getting the mags sent out tomorrow so those should be here shortly as well. I may have to borrow a mag from my buddy to get some shooting done until then.
Click to expand...
Finally man must be hard having a new gun but can't shoot it lol
 
Woogie_man said:
FINALLY have shipping data on the barrel kit and probe! Shows that they should be dropped off at the house on Tuesday. So once they get here I will rip the rifle down and swap things over from a 25 caliber rifle to a 22 caliber rifle.

Talked with Orion and he is getting the mags sent out tomorrow so those should be here shortly as well. I may have to borrow a mag from my buddy to get some shooting done until then.
Click to expand...
My 12 round mag from Orion had to be smoothed out a little bit just before it moved the final place into battery, really only on the lid, not the body itself. No big deal, I've got it working well know, but I would not buy the 12 round magazine again. There is no reason for me, I'm not competing, but the biggest reason is that it is not easier to use. The larger mag is easier to handle and put in the gun, easier to load because it's not so compact and tight, and it isn't in the way of my scope or anything else. If your mags can only hold 12 shots for competition, I would ask him if he could just make some of the larger mags with only 12 spots milled out. I wouldn't want to be fiddling with small 'anything' when time is on the line. I love how the lids just about jump into place on their own when putting them back together. Neat magazines.
 
Ok seems to be holding air and everything is looking ok. I need to gas up my tanks and go shooting this weekend. I did get an update from Orion that the mags are on their way and should be here saturday!

Did take a few test shots with the 36 grain slugs I have made for the Hm1000x. At a regulator pressure at 150 and the power wheel around 10 the shot was very quiet and very pleasant with the IA1350 on the end. Now to get the scope mounted back up and play with that and the thermal. Should make for a fun blaster!
 
Dairyboy said:
How for you like the IA1350? Seems pretty steep in price for a LDC but quite a few people do seem to run them
Click to expand...
I think that it does alright. Considering that it has no felt or anything to absorb sound I guess it's pretty good. It can certainly handle high fpe shooting and the size perfectly fits the shroud. I shot at over 220y and was hitting paint cans dead nuts, with and w/o it on, so I know it has zero effect on accuracy. It's expensive, but it's also all machined individual parts, and built really well, so you are getting what you pay for anyway.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

ernroe
Showing in the snow from the warmth of my house
Replies
3
Views
231
Scriv
Scriv
Northeastbeast
Air Venturi Microstrike in the house ❤️💯🔥
Replies
0
Views
126
Northeastbeast
Northeastbeast
Woogie_man
Others DNT HS635R Thermal
Replies
7
Views
539
Woogie_man
Woogie_man
Woogie_man
Modifications 3D printing barrel parts?
Replies
18
Views
1K
Woogie_man
Woogie_man
Northeastbeast
Others 22 cal MicroStrike in the house 😁
Replies
1
Views
194
Dogowski
D

Trending in this forum

Back
Top