Blackwolf Daystate Single shot loader for the .22 Blackwolf

[Centerfire]

I thought someone might know of who might have one of the Daystate Blacjwolf .22 single shot loaders Left Side loading
What I know.
The JTS is not stock and over $100 Loads left/right
The Carm is not available in Left Hand only for the BlackWolf. Do have Left/right model for the Delta Wolf.
Rowan Engineering is not selling to the USA. (tariffs) Has the left/right model.
DanMan has a suggestion, Just use the magazine. Going to try that tomorrow. Who knows?
Did I miss anyone?

 

[Solo1]

I thought someone might know of who might have one of the Daystate Blacjwolf .22 single shot loaders Left Side loading
What I know.
The JTS is not stock and over $100 Loads left/right
The Carm is not available in Left Hand only for the BlackWolf. Do have Left/right model for the Delta Wolf.
Rowan Engineering is not selling to the USA. (tariffs) Has the left/right model.
DanMan has a suggestion, Just use the magazine. Going to try that tomorrow. Who knows?
Did I miss anyone?

Try maple

Daystate Blackwolf

Innovative Custom 3D printed parts. Airgun magazine, single shot loader, barrel band, etc. Current offering accessories for Umarex Notos, Air Venturi Avenger, Avenge X, FX Dreamline, Impact, Umarex Gauntlet, Benjamin Marauder, Daystate, BRK, Steyr LP50, and more.

maplecustomproducts.com

 

[Franklink]

Always can make your own....

This was with about $3 worth of delrin and an old drill bit....
(Dremel and a belt sander, and a whole bunch of careful measurements)

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Where there's a will there's a way.

 

[Centerfire]

Thanks Solo1, I did visit Maple Custom Products but failed to put that down.
Revisited today and looked at Brocock/BRK XR2/ Daystate BlackWolf single shot loader .22, $21.00
Right side only installation.
I also went to the Brocock/BRK Ghost, Daystate Alpha Wolf? Delta Wolf single shot loader Ambidextrous for either right or left hand use.

Franklink, Thank you for your pictures and knowledge of America can do attitude.
As you say cost $3.00 but priceless.

I am in the cut paper and paste stage right now so we will see what happens when the glue dries.
Thanks

 

[Solo1]

If you want you could email maple and ask if he can do it he made a single shot loader for me with a cutout for longer slugs. Never hurts to ask

 

[Centerfire]

Solo1, You were so correct. I sent a note and Derek Rose sent me a reply. Right now I am undergoing sticker shock as to the shipping cost and taxes. A pop up said the costs may not be as quoted at shipping time.
So I sent a note back and declined at this time. Product looks good but the cost to move to England to minimize the shipping and taxes is not a possibility.
I still need to try the DanMan solution, soon.

 

[Billm]

I don’t have a BW or id knock some out and print them.

 

[Centerfire]

Well it took a while to get to the range but I want to tell Danman that his suggestion to use the BlackWolf magazine for only a single shot works perfectly. Shot 2 pellets as fowlers and shot 2-5 shot targets, .030" & .063" groups.
Bar was at 180 and the regulator at 115. 110 bar. I think I will try this with the Delta Wolf too.

 

[Soren Drost]

A good friend of mine designed and made the ManuLoader magazines No spring tension and you just click it forward manually

 

[Centerfire]

Well Solo1, you were correct about Maple Custom Products being a good source. I contacted them and Jay told me the Super Secret to getting the BlackWolf .22 LEFT hand Single Shot Loader. You place your order on their website for the .22 Right Hand Loader. Then you send them an e-mail to make the right hand loader a Left Hand as I did yesterday at 11:44 AM. Then you wait. At 2:34 PM I received my Order number confirmed and told the Single shot loader was shipping Yesterday.
Freight was $8.95 complete with tracking number. Well now we wait for delivery.

Nice when things come together.