250Z Best moderator

[Bladefin]

After a good bit of shooting this weekend, I can definitely say the Sumo is much quieter than the Airgun Capitol. Both of them are 25/30's on a 25 gun.

I may try a Buck Rail in the future as they seem very affordable.

 

[PestPlasteringPlinker]

I use a Donny on mine and I suggest you go at least one caliber over to avoid clipping.

I tried one over, and its louder than the exact caliber. Youre 100% right about the clipping issue, but I've noticed in particular, I clip, when im removing and reinstalling. Ive taken a habit of using a paint pen(yes, i know, sooooo beautiful) to mark where I need to keep my mod when I thread it on. Since I started doing this, no more clipping.

 

[PestPlasteringPlinker]

After a good bit of shooting this weekend, I can definitely say the Sumo is much quieter than the Airgun Capitol. Both of them are 25/30's on a 25 gun.

I may try a Buck Rail in the future as they seem very affordable.

Heartland my friend. I can't emphasize it enough, if you need the slightly lower tone, and exceptional reduction.

 

[Chief55]

I got an email today from Julie with Buckrail and they are sending me out a new moderator under warranty for the one that failed. They are really a great outfit, and their moderators do a very good job of toning down my airguns. I have 3 of them. One screw on and two slip on, all of them are modular.

 

[jlowe]

You think the Ronin would work well on the FX DRS rifle. Especially at the price.

I would get the Shogun over the Ronin for the DRS.

 

[ZMAN2424]

I've got my two new barrels polished and installed, Just haven't had many opportunities to shoot. The weather will be getting warmer soon and the time change is less than a month away. So, I should be putting them through the paces soon and updating my thread. Both guns have plenums, one is ported the other isn't, yet...

Bladefin, how do I go about getting a new barrel for the 250Z rifle? Mine is registered and under warranty.

 

[Bladefin]

Bladefin, how do I go about getting a new barrel for the 250Z rifle? Mine is registered and under warranty.

Contact Barra and start a warranty claim.

 

[ZMAN2424]

Contact Barra and start a warranty claim.

Bladefin, much appreciated the info!

 

[Twitch]

Gentlemen, what are your thoughts for a moderator for the 250Z? I've just pulled the trigger and ordered the rifle straight from Barra. I know there are a wide variety that will work but I am trying not to break the bank.
Thanks in advance for your suggestions
DRM
P.S. It is the .22 cal.

I have the donnyFL yokozuna on mine. Very quiet and shooting same hole at 50 yards at 925fps

 

[Twitch]

Gentlemen, what are your thoughts for a moderator for the 250Z? I've just pulled the trigger and ordered the rifle straight from Barra. I know there are a wide variety that will work but I am trying not to break the bank.
Thanks in advance for your suggestions
DRM
P.S. It is the .22 cal.

 

[cosmic]

Buck Rail modular moderator

 

[stmag1300]

Well i pulled the trigger so to speak and went cheap and bought a buckrail moderator....with a bit of dissatisfaction from my wife due to me spending more money . Must cheaper than the others out there, but i can say without a doubt, it's the best $75 I've spent in a while. The 250z defenitely has a snap without the moderator.....i wish i had a meter to see what the decibel level was, but OMG what a difference it is with the buckrail. Thats no exaggeration.

 

[Twitch]

Well i pulled the trigger so to speak and went cheap and bought a buckrail moderator....with a bit of dissatisfaction from my wife due to me spending more money . Must cheaper than the others out there, but i can say without a doubt, it's the best $75 I've spent in a while. The 250z defenitely has a snap without the moderator.....i wish i had a meter to see what the decibel level was, but OMG what a difference it is with the buckrail. Thats no exaggeration.

I've got one for backup, you made a good choice

 

[JimT66]

I've got one for backup, you made a good choice

I got 2 from them in the mail today! They do make great suppressors.

 

[old navy]

Heart surgery Monday for me.. I will try to get my rifle back together tomorrow, God willing, so I can leak test it..

good luck on your surgery

 

[Darxyde.22]

Gentlemen, what are your thoughts for a moderator for the 250Z? I've just pulled the trigger and ordered the rifle straight from Barra. I know there are a wide variety that will work but I am trying not to break the bank.
Thanks in advance for your suggestions
DRM
P.S. It is the .22 cal.

I put a DonnyFL Sumo as per their suggestion and it has worked wonders. It’s currently backyard friendly, whereas w/o a silencer it was not so friendly to my neighbors. I live in a rural area and can shoot most anything up to but not including .22 mag. My 250z naked did draw a few questions as to what was I “shooting now”?!…currently with the sumo the only thing my neighbors hear is the “thwack” of the target being struck. My 250z is tuned for ZAN ELR slugs, I only get 24 good regulated shots as those slugs are 35.5 grains, but at 100 yards I can print a group that is sub-MOA consistently.

 

[Cantona256]

I put a DonnyFL Sumo as per their suggestion and it has worked wonders. It’s currently backyard friendly, whereas w/o a silencer it was not so friendly to my neighbors. I live in a rural area and can shoot most anything up to but not including .22 mag. My 250z naked did draw a few questions as to what was I “shooting now”?!…currently with the sumo the only thing my neighbors hear is the “thwack” of the target being struck. My 250z is tuned for ZAN ELR slugs, I only get 24 good regulated shots as those slugs are 35.5 grains, but at 100 yards I can print a group that is sub-MOA consistently.

That’s outstanding.. the 250z is such an amazing gun.

 

[Twitch]

Great shooting

 

[Bladefin]

I never replied back about the Sumo I put on one of mine. I am quite impressed. It is very quiet and noticeably better than the Airgun Capitol.

Both guns are shooting a roughly 33gr slug JSB K/O mkii vs Zan. And both at 2450 to 2500psi. I'm getting half inch groups with the JSB at 50 and 3/4 to 1" with the Zan. Once I use up all the Zan I will tune the other to JSB.