250Z Best moderator

[Bladefin]

After a good bit of shooting this weekend, I can definitely say the Sumo is much quieter than the Airgun Capitol. Both of them are 25/30's on a 25 gun.

I may try a Buck Rail in the future as they seem very affordable.

 

[PestPlasteringPlinker]

I use a Donny on mine and I suggest you go at least one caliber over to avoid clipping.

I tried one over, and its louder than the exact caliber. Youre 100% right about the clipping issue, but I've noticed in particular, I clip, when im removing and reinstalling. Ive taken a habit of using a paint pen(yes, i know, sooooo beautiful) to mark where I need to keep my mod when I thread it on. Since I started doing this, no more clipping.

 

[PestPlasteringPlinker]

After a good bit of shooting this weekend, I can definitely say the Sumo is much quieter than the Airgun Capitol. Both of them are 25/30's on a 25 gun.

I may try a Buck Rail in the future as they seem very affordable.

Heartland my friend. I can't emphasize it enough, if you need the slightly lower tone, and exceptional reduction.

 

[Chief55]

I got an email today from Julie with Buckrail and they are sending me out a new moderator under warranty for the one that failed. They are really a great outfit, and their moderators do a very good job of toning down my airguns. I have 3 of them. One screw on and two slip on, all of them are modular.

 

[jlowe]

You think the Ronin would work well on the FX DRS rifle. Especially at the price.

I would get the Shogun over the Ronin for the DRS.

 

[ZMAN2424]

I've got my two new barrels polished and installed, Just haven't had many opportunities to shoot. The weather will be getting warmer soon and the time change is less than a month away. So, I should be putting them through the paces soon and updating my thread. Both guns have plenums, one is ported the other isn't, yet...

Bladefin, how do I go about getting a new barrel for the 250Z rifle? Mine is registered and under warranty.

 

[Bladefin]

Bladefin, how do I go about getting a new barrel for the 250Z rifle? Mine is registered and under warranty.

Contact Barra and start a warranty claim.

 

[ZMAN2424]

Contact Barra and start a warranty claim.

Bladefin, much appreciated the info!

 

[Twitch]

Gentlemen, what are your thoughts for a moderator for the 250Z? I've just pulled the trigger and ordered the rifle straight from Barra. I know there are a wide variety that will work but I am trying not to break the bank.
Thanks in advance for your suggestions
DRM
P.S. It is the .22 cal.

I have the donnyFL yokozuna on mine. Very quiet and shooting same hole at 50 yards at 925fps

 

[Twitch]

Gentlemen, what are your thoughts for a moderator for the 250Z? I've just pulled the trigger and ordered the rifle straight from Barra. I know there are a wide variety that will work but I am trying not to break the bank.
Thanks in advance for your suggestions
DRM
P.S. It is the .22 cal.

 

[cosmic]

Buck Rail modular moderator