Value For Money – Barra 270z
At a Street Price of $699.99, the Barra 270z air rifle continues the company’s strategy of offering high performance, individual products at a very attractive price. The Barra 270z PCP air rifle was announced back at the SHOT Show in January 2026. Now it’s here and it was definitely worth waiting for!
The 270z is an upgraded version of the very popular, HAM Gold Award-winning Barra 250z. We like the 270z a lot as it an interesting combination of new and unusual – the “round the barrel” HPA reservoir – combined with a retro-style bolt action. Plus all the “must have” features for any modern PCP such as magazine feed, externally-adjustable regulator and hammer spring tension.
Plus – I’m going to repeat this several times throughout this review – in my opinion, the 270z has a certain, indefinable something that I really like. Should I call it style? Or personality? I don’t know but the 270z certainly impresses me subjectively in a way that the 250z doesn’t – for all its ability and value.
BUY FROM PYRAMYD
Barra 270z PCP Air Rifle 0.25
Speed And Accuracy – Barra 270z
The 270z tested by Hard Air Magazine was in .25 caliber. It delivered a maximum Muzzle Velocity of 995 FPS with the lightest – 16.54 Grain – Predator GTO alloy pellets. The maximum with lead pellets was 951 FPS, achieved with the light 19.91 Grain H&N Field Target Trophy pellets.
| Pellet | Average Muzzle Velocity | Average Muzzle Energy | Accuracy |
|---|---|---|---|
| Predator GTO Alloy 16.54 Grain | 995 FPS | 36.37 Ft/Lbs | Good |
| H&N Field Target Trophy 19.91 Grain | 951 FPS | 39.99 Ft/Lbs | Poor. |
| JTS Dead Center 25.39 Grain | 964 FPS | 52.4 Ft/Lbs | Excellent. |
| JSB Exact King 25.39 Grain | 960 FPS | 51.97 Ft/Lbs | Excellent. |
| Predator Polymag 26.0 Grain | 899 FPS | 46.67 Ft/Lbs | Poor. |
| JSB KnockOut Slugs 33.49 Grain | 869 FPS | 52.48 Ft/Lbs | Very Good. |
| JSB Exact King Heavy 33.95 Grain | 844 FPS | 53.71 Ft/Lbs | Excellent. Best Tested. |
| H&N Slug HP 36 Grain | 826 FPS | 54.55 Ft/Lbs | Excellent. |
| Dead Center Slugs 43.06 Grain | 770 FPS | 56.70 Ft/Lbs | Excellent. |
Much more important for the knowledgeable airgunner is the Muzzle Energy achieved by the gun. Here the test gun demonstrated a maximum of 56.7 Ft/Lbs when shooting 43.06 Grain JTS Dead Center slugs at 770 FPS.
Best accuracy was achieved using the 33.95 Grain JSB King Heavy pellets. But several other groups were not far behind.
The manufacturer’s website specifies that the Barra 270z air rifle has a rifled barrel with a 1:18 twist rate. They also state that the barrel is un-choked. That may indicate why good performance was obtained shooting slugs.
At 25 Yards, the Barra 270z air rifle tested by HAM delivered this approximately quarter-Inch Center-To-Center group for 10 shots. And that’s in spite of the non-ideal, gusty winds that blew throughout the test session. You will notice that most of our test targets show a greater horizontal than vertical CTC spread. That’s the reason.
In our opinion, this target below is an excellent group. Great shooting by HAM Tester Doug Wall!
Given the barrel twist rate, good accuracy with the HAM-tested slugs and power capabilities, many owners will undoubtedly want to shoot their 270z with slugs.
In this context, it’s important to know that the 43.06 Grain JTS Dead Center slugs were about the longest possible projectile that would fit into the 270z’s magazine. They are 10.68 mm (0.42 Inches) long. Don’t plan to go longer unless using the single shot tray.
Trigger And Cocking Effort – Barra 170z
The Barra 270z air rifle tested by HAM had an average trigger pull weight of 4 Lb 2.9 Oz. This was more than 2 X heavier than the trigger of the 250z tested by HAM (1 Lb 15 Oz, average). It’s not clear why the 270z’s pull weight should be so high, but it definitely should be less!
This is a two-stage trigger. The first stage is tolerably light and the second stage easily identified. Sear release is quite crisp. This is not a dedicated target-grade trigger, however it’s definitely good for hunting and suitable for informal use.
Both first and second stage travel can be adjusted using separate screws. However the Barra owner’s manual does not indicate how to reduce the pull weight.
As always, HAM testers shot with the trigger as received. It has to be said that the heavy pull weight did not prevent Doug Wall from achieving some excellent groups on the test targets…
The manual, trigger-block safety is operated by a “push forward and back” lever. It worked well. But there’s no indication as to which position is actually safe!
For operating reasons, there should be a red dot (or something) as a visual indicator of the “safe” position.
The bolt handle itself is large, chunky and unapologetic. It’s easy enough to operate but responds best to leisurely functioning. This is not a loading system designed for rapid fire! So sit back and enjoy the experience…
You need to pull the bolt handle all the way back until the audible “click” to ensure that the gun is correctly cocked. It’s not a light pull, but it is strangely satisfying.
We also noticed that the closing force was heavier with the magazine and ammo in place than without. This probably indicates a tight fit as the ammo is pushed into the rear of the barrel.
One good feature is that the 270z’s bolt handle is designed to be easily changed to the opposite side. Left-handers will definitely be pleased about this!
Comparison To Makers Claims – Barra 270z
The manufacturer’s website claims that the Barra 270z in .25 caliber is capable of firing pellets at up the obligatory 1000 FPS. The gun tested by HAM generated average Muzzle Velocities of 995 FPS with Predator GTO lead-free pellets and 951 FPS with 19.91 Grain H&N Field Target Trophy lead pellets. So it’s clearly in the range of that magic 1,000 FPS claim.
Curiously there’s no maximum Muzzle Energy claim. However this semi-official thread in the HAM Community implies that it’s around 60 Ft/Lbs in “as received” condition.
I feel that many potential owners would value an indication of typical Muzzle Velocity in factory condition. And the corresponding shot count, too! True, the externally-adjustable regulator and hammer spring capabilities of the 270z mean that these specifications can be overridden by the enthusiastic owner. However pretty-well all other manufacturers quote these figures for guns in stock condition.
However Barra should be complimented for being one of the few companies to list the barrel twist rate. As mentioned above, in the case of the 270z, it is 1 turn in 18 Inches.
Again we should mention that the Barra 270z air rifle’s “HPA tube around barrel” design is covered by a US Patent. The patent number – 10161703-B2 – is marked on the underside of the air tube.
The patent was filed in 2017 and issued on 25 December 2018, so it’s not a new concept. The inventor is named as Mr Xu from Shaoxing Lingfeng Air Gun Manufacturing Co. Ltd in China. That’s Snowpeak Airguns to you and me, the manufacturer of the 270z…
Consistency – Barra 270z
Consistency of Muzzle Velocity was a little variable in HAM testing.
The best Standard Deviation (the statistical measure of shot-to-shot consistency) achieved on test was a spectacular 1.72 FPS for 10 shots with the JTS Dead Center 25.39 Grain pellets. Five other types of ammo registered highly-creditable Standard Deviations of around 3 FPS.
However three others showed values in the 8 -10 FPS range. That brought the average Standard Deviation test value down to a still-creditable average of 4.58 FPS.
As we can see below, the 27.8 Grain Benjamin pellets used for our HAM shootdown test showed a reasonable level of consistency with a Standard Deviation of 20.77 FPS out to the regulator set point at shot 42. The individual test targets indicate that this could have been significantly better had a different pellet been chosen.
Trigger pull weights were very consistent. HAM testing recorded a minimum of 3 Lbs 15.5 Oz and a maximum of 4 Lbs 4.3 Oz. That’s a variability of just +/- 2 Oz around the 4 Lbs 2.9 Oz average. Excellent!
Noise Level – Barra 270z
The Barra 270z air rifle is a powerful PCP. Because of that “round the barrel” HPA reservoir, it has no built-in silencer. The result can be only one thing. It’s loud!
Yes, there’s a 1/2-Inch x 20 threaded muzzle to the barrel, so an aftermarket silencer can be attached. However that will make the gun even longer and – probably – more cumbersome to carry and shoot.
Unless you’re going to attach a dedicated air rifle silencer – where legal – the 270z is really not going to be backyard-friendly for many airgunners.
Sights And Scope – Barra 270z
The Barra 270z air rifle includes a top Picatinny rail for scope mounting. With a total “toothed” length of no less than 10 Inches, there’s plenty of space to mount just about any riflescope you might want to consider.
For this HAM test review, we installed a favorite 4-16 x 50 Hawke Sidewinder 30 SF scope using Leapers UTG PRO high rings. This combination handled well although the total weight was no less than 10 Lbs 0 Oz.
The 270z’s magazine projects very little above the Picatinny scope mounting rail. This provides maximum flexibility for scope mounting, without the need to avoid the protruding magazine that is often found on PCP air rifles.
However the mag loads into the action from the left side. This is unfortunate, as it precludes the use of a large-diameter parallax correction wheel for the scope.
Shootability – Barra 270z
The 270z is a big air rifle. But it balances well around a normal forehand grip and is comfortable to shoot in all the tested positions. However – at 10 Lbs all-up, including the scope – this is not a light weight gun.
Surprisingly, in view of the long, front-mounted barrel/tube assembly, we did not find the 270z to be particularly muzzle heavy. This is probably due to the good (but simple) stock design that places a large amount of real, solid “tree wood” behind the trigger as a counterbalance.
Barra positions the 270z clearly as a hunting gun. This is fair. However I would definitely want to make use of the rear sling swivel mount to attach a suitable sling for carrying in the field. That sling also can be threaded through the slot in the stock’s forend for the front attachment position (a standard 1 1/4-Inch sling fits just fine).
The deep rubber buttpad is plain but grips the shoulder well. Plus the adjustable cheekpiece is a critical feature that helps to ensure a good, repeatable cheek weld in use.
The bolt handle is about as chunky an implementation as I have ever seen. And I like it! The manual safety is mounted conveniently for use and the bolt handle itself can readily be changed to the opposite side – if required for left-handed shooters. (The Owner’s Manual provides clear directions).
Overall, the 270z definitely rewards a slow, determined and unhurried approach to operation. This is not a slick, sidelever, “fire as fast as possible” type of air rifle.
It benefits from steady, certain operation of bolt action and trigger. In that, it’s unusual. Yet so is the satisfaction that I derived from shooting it. Added to the looks and overall handling, there’s that “personality” again that keeps calling to me.
(The hammer spring adjustment screw can be seen – just – in the photograph above. It’s peeking out from underneath the bolt handle.)
HAM Testers found the 9-shot (in .25 caliber) rotary magazine a little tricky to insert in the breech initially. However, we soon became used to it and welcome the way the magazine “jumps” into position delightfully when offered correctly into the breech. That’s the result of the high-strength magnet built into each magazine.
The mag loads from the left side. As mentioned above, this is not our preferred choice, as it usually precludes the use of a “big wheel” for scope parallax adjustment.
Appearance And Finish – Barra 270z
Of course, the key feature of the 270z air rifle is that “round the barrel” HPA reservoir. This means that there is no conventional air tube or bottle under the barrel. The plenum is incorporated in the form of a firearm’s box magazine with the regulated pressure gauge in its base.
Combined with the wood stock, these design features certainly make the 270z look sleek and striking. That’s my personal opinion.
But note that many will probably think that the 270z is actually a firearm as they cannot see an air bottle or tube. It certainly looks like one! Responsible, thoughtful handling will be required even more than ever here…
As with the 250z, the level of surface finish to both metal and plastic parts is very high. Parts fit and even printing are also of a very high order. The Barra 270z air rifle certainly does not give the appearance of being built down to a price!
The finish of the wood stock is impressive, too. The wood is beech, so it’s hardwood. The shaping, surface and laser-cut checkering are all well-done and certainly impressive for an air rifle of this price.
The close-up photograph below shows how well the synthetic stock cap/sling slot/Picatinny bipod mount fits together in both design and finish. It’s also a reminder that a heavy gun like the 270Z needs a strong, robust bipod. We mounted a favorite Leapers UTG Goliath bipod and that proved to be another good pairing with Barra’s latest.
The gun’s finish matches well with the high-quality finishes of the Leapers UTG Pro rings and Hawke riflescope, too.
Buying And Owning – Barra 270z
Barra airguns are steadily becoming more widely available in both big box and online stores. This is a good thing and – of course – you can buy directly from the Barra Airguns website, should you wish.
The Barra 270z is sent to you with the action and stock separated. You simply put them together using two machine screws, following the excellent instructions supplied.
This is a genius move by Barra and I expect we will see it implemented by more airgun manufacturers in future!
That’s because UPS and FedEx charge an additional, substantial handling fee on any package longer than 48 Inches (it can add as much as $100.00 to retail shipping costs). And the 270z – like many air rifles – is long enough so that the packaging for the full-length gun exceeds that 48-Inch limit.
Packaging the action and stock separately saves significantly on shipping costs and so benefits the consumer – you and me – in the price we pay for our airguns. It will also save you a lot of money in the unlikely event that you need to return it for warranty attention. Well done Barra!
The 270z benefits also from larger – normal-size – gauges compared to the 250z. Below we see (left to right) the deep-set probe fill port access, pressure gauge and regulator adjustment screw. There is a degassing screw too, but that is located on top of the gun.
It’s nice to see a metal rotor used in the magazine, instead of the plastic in most other air rifles. Even if not strictly necessary, it enhanced the impression of durability that’s found throughout the 270z. Two mags are included.
There’s also a single shot tray included with the gun. (Even though one is not formally listed in Barra’s product description).
The English-only manual is very well written and illustrated.
The warranty is for 12 months – so long as you register online with Barra. At a time when 3- and 5-year warranties are common, this is an area that could be improved.
However – in a welcome move – Barra does make some replacement parts readily available and at attractive prices, too!
Other 25-Yard Test Targets – Barra 270z
BUY FROM PYRAMYD
Barra 270z PCP Air Rifle 0.25
This entire article including scoring, test targets etc is Copyright Hard Air Magazine and may NOT in part or in whole be reproduced in any electronic or printed medium without prior permission from the publisher.
The post Barra 270z PCP Air Rifle Review .25 Caliber appeared first on Hard Air Magazine.