Search results

After using the compressor for a couple years, I have only one small complaint. The automatic stop, I wish that the stop part of that arm was on the front side of the arm instead of the back side. If it was on the front, you could see exactly where you set it. The way it is now, the stop arm...

I had to reply to my own post. All is well. I decided to do exactly as the instructions stated to see what would happen. It worked flawlessly. I understand that all regulators need a breathing hole in order to work. On some applications you have to drill a breathing hole in the air chamber to...

I'm including a picture from the installation manual to show what I'm talking about.

Hi gang. You helped me out before and I hope you can help me again. Some of you know that I got a Bandit PCP recently and converted it to a Bandit black with a Chaser long barrel, I also mentioned about getting the Lane regulator. Well the regulator came today and reading the instructions, I'm...

I gave up on searching for an Altaros regulator and ordered a Lane regulator. Price is steep at $114 ( exchange rate from sterling pound to USD) Not sure how long it will take to get here but am anxious to install it.

I recently got my Bandit. converted it to a Bandit Black using the Chaser rifle kit and put the rifle barrel on the bandit. Within a week, I stretched the hammer spring for more power. Now highest velocity has been 926FPS. Today I ordered a Lane regulator for the bandit. A little steep at a...

Hi gang. I need your help. I have been searching for the Altaros regulator for the Stormrider and Bandit. I've seen videos of it on Youtube but they all seem to be 6 years old. I can't seem to find any retailer that sells them. Air Guns of Arizona was the only one I found and they are out of...

It is a very good compressor. Last year I bought it when I bought my Barra 1100Z rifle. I bought the compressor from Pyramid Air and paid $499.00, checked recently and the price is now $449.99 I only shoot air rifle during the colder Pa. weather. I have been using the compressor in my basement...

No, it was leaking from the QR on my compressor not the probe itself. I do want to say that now I am a happy camper, I found the fix. The stock Bandit probe has a longer shoulder before the stop. I put a 2.24mm thick washer on that probe. with that washer, the shoulder is the same length as my...

Getting back into air gunning now that the Pa temps are starting to cool. As some of you know, I got into PCP air guns last year with 2 Barra 1100z rifles and a Air venturi RovAir compressor. I'm hooked on PCP now. Now fast forward to this month. I ordered a Diana Bandit PCP pistol and it got...

I briefly watched a video on the Diana Bandit PCP, they mentioned that installing a regulator reduces the capacity of the tank but reading your results dis proves that. I ordered the Bandit .22 and will receive it in a couple days. The only mods I'm going to do to it is maybe hand grip if my...

JimT66, sorry I can't help you. Both my 1100Z's, .177 and .22 are gen 1's. I love them both but I have to admit that I shoot the .22 more. I set my compressor to 2600psi and get about 3 clips of consistent shots.

I had very good customer service with Crossman the first time it happened, They emailed me a shipping label to send the defective rifle back to them, no cost to me. They did make a mistake when they sent me the new rifle, they sent me the 22 cal. the defective rifle was .177. They apologised...

Thanks for all the tips. I did not clean the barrel,but will. I did shoot the meister flat and if I remember correctly they gave me the highest FPS. Yes I am a lefty and fileting down the thumb rest made it more comfortable. Right now my shooting is at a stand still for my indoor range. 2 days...

Well my Barra pellet order came. 4 tins 3 .177 in blister packs and 1 .22 loose. The shipping box was cube shaped, a little bigger than the blister pack. Blister packs were stacked and le loos tin was sideways in the box. the bos had about 3" or so of the paper packing material on top. All...

Maybe Roamin Greco1 is right, that it is a repair person or repair location stamp

Thanks DJNA, I'll check it out. Bill

Ok, thanks that's a possibility, I know I was around 10 years old when my dad bought it for me but I don't remember if it was new or used.

I tried finding info on Mac1 Airguns. From what I gather, his web site is no longer available. Some one said that he was in an accident, did not give detail on it but did say yhat a new website was being worked on.

For the knowledgeable of old crossman or any one else. Some of you may know that I recently got the part to fix my Crosman Mark 1 pistol. I went through several co2's yesterday and found something I hadn't noticed before. The number 53 inside a box stamped into the frame. The only thing I can...