What did you buy/receive today?

[Billm]

That is going to depend on what you want from it.

Classic/iconic would be a Blue Streak or Benji 3x7(317, 347, or 397). In their natural form no optics, just factory irons. You can get an intermount kit though to be able to install optics.

My favorite so far of the new/current production is the Crosman Vapor Max. I have had excellent accuracy out of it out to 90+ yards. But the optics rail is poorly designed and makes clamping onto the dovetail securely difficult. The composite stock has some design flaws, and weak where it meets the receiver (my original showed up new and broken). I am seriously considering using this gun as my HFT rifle.

I have an Amazon influencer account. I logged in and Crossman offered me a discounted Vapor Max for $91. I can’t decide lol. Then I just found them on clearance for $79. I’ll have to have a quick read up on them

 

[PapaT]

I have an Amazon influencer account. I logged in and Crossman offered me a discounted Vapor Max for $91. I can’t decide lol. Then I just found them on clearance for $79. I’ll have to have a quick read up on them

I got mine from Rich at Airgun Revisions. But then you have to add shipping.

 

[Grunt64]

Ordered from Hunters Supply .308 caliber .310 diameter 154gr and flat point.

 

[Danman]

While waiting for the weather to match what the calender says (spring!), and my Brk Ghost slug Barrel to arrive I ordered a FFP scope and a bunch more slugs for it. This is the Helix Gen2 6x24 and It will be replacing the SFP Gen1 on the .
I will share my findings on Ham hopefully of both Scopes down the road. The Gen 1 is terrific but the glass clarity on my Athlon Midas Tac slaps it in the face.

 

[duchunter007]

Got 6 tins of AEA 21.9 grain pellets and 2 tins of AEA 25.3 grain pellets

 

[duchunter007]

My new Graham Wind flags arrived today, these are very well made. I will post more pictures when they are setup at the range

 

[Chris two-furs]

I placed an order for those Norma 17. G .22 pellets at the lowest price per round of all listed for them. Better get em fore they're gone. They shoot excellent.

 

[Murfdurf82]

The Amazon truck dropped off my rangefinder 1 minutes after I left for work...I'm using it there too. I order brass hammer weights from c88 for the liberty, max 1. (If they don't fit as the parts are for different rifles...max 1- zelos, notos weight-liberty...I'll modify them or buy a piece of brass and make my own) A zelos shortened spring as well to see if that will work on the max 1. Stiff factory spring on it, so adjustment does nothing.

 

[Murfdurf82]

I placed an order for those Norma 17. G .22 pellets at the lowest price per round of all listed for them. Better get em fore they're gone. They shoot excellent.

I bought 56 tins a while back, 2 cents a pellet. I've read that Norma is under Beretta and is expanding manufacturing in the USA. So with some outlets being sold out, are we all buying what's left of old stock before the manufacturer starts up in the states...?

 

[406 Rick]

So this will be my first official post to the site (not counting my introduction a couple weeks ago). Recently bought my 1st PCP (a Zelos in .22), and the last couple of weeks has been a whirlwind of late nights reading posts, watching YT channels and vids , and acquiring parts in hopes of putting together a mid level package that I will finally be able to pull the trigger on in the morning. The big brown truck brought the last piece of the puzzle about 20 minutes ago. A CS3.
More later....

 

[Solo1]

So this will be my first official post to the site (not counting my introduction a couple weeks ago). Recently bought my 1st PCP (a Zelos in .22), and the last couple of weeks has been a whirlwind of late nights reading posts, watching YT channels and vids , and acquiring parts in hopes of putting together a mid level package that I will finally be able to pull the trigger on in the morning. The big brown truck brought the last piece of the puzzle about 20 minutes ago. A CS3.
More later....

Have fun!

 

[FL22]

Small order of pellets and a fitting from PA, I have been trying to find a suitable replacement for the BSDs that my Wolverine prefers. I have seen several postings that the JTS 10.4 seem to do well.

 

[Zelos1]

So this will be my first official post to the site (not counting my introduction a couple weeks ago). Recently bought my 1st PCP (a Zelos in .22), and the last couple of weeks has been a whirlwind of late nights reading posts, watching YT channels and vids , and acquiring parts in hopes of putting together a mid level package that I will finally be able to pull the trigger on in the morning. The big brown truck brought the last piece of the puzzle about 20 minutes ago. A CS3.
More later....

Mine works very very well with the 18.1gr. JTS Dead Center domed pellets at about 1800 psi on the reg.(came that way from the store).
You are going to love it!

 

[406 Rick]

Another shameless purchase that I probably don't 'need', but sure can't hurt . I noticed after my first 2-3 fills with this new compressor,it would bleed off a couple of drops of what could only be described as the look of chocolate milk... That normal? Now to make myself a nice caddy to house these 2 plus the inverter into a single clean looking unit.

 

[duchunter007]

Another shameless purchase that I probably don't 'need', but sure can't hurt . I noticed after my first 2-3 fills with this new compressor,it would bleed off a couple of drops of what could only be described as the look of chocolate milk... That normal? Now to make myself a nice caddy to house these 2 plus the inverter into a single clean looking unit.

Those are great filters

 

[PG1 Airgunner]

Another shameless purchase that I probably don't 'need', but sure can't hurt . I noticed after my first 2-3 fills with this new compressor,it would bleed off a couple of drops of what could only be described as the look of chocolate milk... That normal? Now to make myself a nice caddy to house these 2 plus the inverter into a single clean looking unit.

I run one of these on my RovAir unit and it works really well…

 

[Billm]

The filter works very well. I’ve inspected my bottle with a bore scope after filling more than a 100 times and found no indication of any moisture.

 

[Chief55]

Yes, I have one as well and I wish I had always had one. Can't beat this filter and a GX compressor. The humidity is really high in Florida.

 

[Murfdurf82]

A 3/8 brass rod showed up yesterday. I'm going to make my own hammer weights. 12$ for a 1' stick. Sling mounts for m-lok, for wood and standard threaded showing up today. I'd like to get qd sling mounts on the max 1 and I have t seen anyone do that on a zelos. I think the bottom of the butt stock has a good spot to drill a mount and the evol 3d hand guard m-locked up front. And I received a shortened zelos hammer spring and I'm going to see if it will work on max 1 so I can actually make adjustments. Time will tell what will work out!

 

[Chief55]

I ordered some 125gr .358 slugs. I will size them to .356 and .357 to see what my gun likes the best.