Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

PCP S510 Fixing issues and voiding my warranty 😁

FL22

Grand HAMster
3,552
12,794
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Airguns of Arizona - 10% discount
Country flag
So I’m headed down the path of not caring about warranties anymore.

Started with trying to polish my barrel, which still hasn’t panned out yet.

I found two broken Orings lots of loose screws and with a Dremel bit performed some light deburring by hand (on the brass seal carrier air inlet port).

My owners manual and the downloadable version online doesn’t even show the Oring (#56 is for sealing the pellet probe), however other model S510s show it.

Might explain why it seemed to be getting louder to me and a loss of accuracy.

There was an excess of glue/thread locker between the carrier and the barrel where the Oring is seated, I carefully and thoroughly cleaned it.

I found some O-rings on Amazon and some bore mops. The one I had even though it was a .22 wouldn’t fit.

IMG_2977.webp
IMG_2971.webp
IMG_2979.webpIMG_2978.webp
 
My response is thst the Air Arms (Air Venturi) Life-Time Warranty covers all non wear & tear items on your rifle for the life of it as long as the rifle hasn't been changed by the original owner. If you have opened up your rifle to properly lubricate it or to replace worn O rings, there is no problem. However, if you choose to polish the rifle barrel . . . you have completed work changing the way the rifle was made, there-by voiding the warranty. I am quite courious as to why one would choose to polish a Lother Walther rifled barrel? Cleaning is one thing, but polishing? You have indeed voided your warranty. I am also courious as to your broken O rings . . . did you perhaps use an inappropiate lubricant on them? It's very important to learn the perameters of your airgun before tearing into it. Orv.
 
Nice work, Hoping you get to the bottom of it! Your pin probe...it there a bur on it? mine has one that I need to address soon, had a pellet jam last year halfway in and I could not pull probe back out so I forced it forward and fired it out. I'm 100% sure my S510 is less accurate now than it was when I bought it from that or some copper coated pellets i used last year šŸ¤” It would shoot pellet touching pellet all day, now I get some spread that I don't love. Still very accurate but no longer a gun I'd use for competition, will tear into mine eventually. How difficult was it to pull barrel @FL22 ?
And to @Hoppalong Doc I have polished my Ghosts L.W. barrel as well with excellent results. It's as accurate again as when I first bought it and should stay accurate longeršŸ‘
 
Nice work, Hoping you get to the bottom of it! Your pin probe...it there a bur on it? mine has one that I need to address soon, had a pellet jam last year halfway in and I could not pull probe back out so I forced it forward and fired it out. I'm 100% sure my S510 is less accurate now than it was when I bought it from that or some copper coated pellets i used last year šŸ¤” It would shoot pellet touching pellet all day, now I get some spread that I don't love. Still very accurate but no longer a gun I'd use for competition, will tear into mine eventually. How difficult was it to pull barrel @FL22 ?
And to @Hoppalong Doc I have polished my Ghosts L.W. barrel as well with excellent results. It's as accurate as when I first bought it again and should stay accurate longeršŸ‘
Sounds to me like you’re subconsciously trying to justify another airgun purchase 😜
 
So I’m headed down the path of not caring about warranties anymore.

Started with trying to polish my barrel, which still hasn’t panned out yet.

I found two broken Orings lots of loose screws and with a Dremel bit performed some light deburring by hand (on the brass seal carrier air inlet port).

My owners manual and the downloadable version online doesn’t even show the Oring (#56 is for sealing the pellet probe), however other model S510s show it.

Might explain why it seemed to be getting louder to me and a loss of accuracy.

There was an excess of glue/thread locker between the carrier and the barrel where the Oring is seated, I carefully and thoroughly cleaned it.

I found some O-rings on Amazon and some bore mops. The one I had even though it was a .22 wouldn’t fit.

View attachment 14474
View attachment 14477
View attachment 14475View attachment 14476
Personally, I’d be disappointed if polishing a barrel voided the warranty. Polishing a trigger linkage etc., yes because it changes the specs of the gun and of course their potential for liability. Porting etc. makes total sense that it would void thewarranty. But these polishing compounds are so mild that there is probably no measurable change in the specs of the barrel. Seems more like a deep cleaning than a mod.
 
My response is thst the Air Arms (Air Venturi) Life-Time Warranty covers all non wear & tear items on your rifle for the life of it as long as the rifle hasn't been changed by the original owner. If you have opened up your rifle to properly lubricate it or to replace worn O rings, there is no problem. However, if you choose to polish the rifle barrel . . . you have completed work changing the way the rifle was made, there-by voiding the warranty. I am quite courious as to why one would choose to polish a Lother Walther rifled barrel? Cleaning is one thing, but polishing? You have indeed voided your warranty. I am also courious as to your broken O rings . . . did you perhaps use an inappropiate lubricant on them? It's very important to learn the perameters of your airgun before tearing into it. Orv.
Hello @Hoppalong Doc , up till this point I have not needed to lubricant any of the internal O rings, just the three on the gauge and block assembly. I use food grade silicone lube where appropriate.

I have cleaned the barrel of my rifle following the manufacturers recommendation of 200 shots or when accuracy is diminished.

I have found this to be around 98 to 100 shots or accuracy will diminish quickly.

Please see my thread regarding 30 shot groups.

This is reason number one to polish a barrel.

Supporting reason for polishing the barrel is the fact that at 40 yards for instance, with my Tapan or my Contour I can shoot sub MOA groups.

With my S510 at 25 yards, I cannot. I’ve done the work it’s not me.
 
Personally, I’d be disappointed if polishing a barrel voided the warranty. Polishing a trigger linkage etc., yes because it changes the specs of the gun and of course their potential for liability. Porting etc. makes total sense that it would void thewarranty. But these polishing compounds are so mild that there is probably no measurable change in the specs of the barrel. Seems more like a deep cleaning than a mod.
I definitely agree with you, Bill, but the future I’m just going to look at Airguns from a serviceability point of view in lieu of warranty.

But that’s just for me, everyone else has to do what’s in their best interest and wheelhouse.
 
Well, well, well, we've come a long way since our first conversation on these forums haven't we? Congratulations! You're officially an owner of your airgun, not just a steward, keeping it pristine in the safe for the next generation, or hoping for a quick sale turn around at the price you bought it for. Not only that, but now, the most precious commodity you have, time, is not wasted waiting for your gun to go back and forth in the mail and all the horrors which can result from doing so. The manufacurer, with their warranty, didn't make that gun just for you, bespoke, they made it for everybody. If you're careful you can tailor it to what you want it to be and increase it's worth to you, like you have already, and more. Have you ever regretted getting up from crawling on the floor as a child? I don't think that you will regret this move either. Bravo!
 
I received a bag of O-rings it’s a good thing that I bought a pack of 50.

Every time I put one on the barrel ( plenty of silicone ) and carefully slide it into the breach block it either cuts the O-ring in half or slices a piece of it off so obviously I have some more work to do.

Before I polish the barrel, I am going to make sure that it is back to as close to factory form as I can manage then I am going to perform a 5 & 30 shot group.

IMG_2992.webpIMG_2991.webp
 
Barrels can be tricky. If you are cutting the barrel orings like that, and you are pushing the barrel in horizontally, try instead, to put the barrel in vertically, straight up. Let the weight of the barrel rest on the first oring it encounters and then you can slowly press down and twist and push on the oring with a piece of plastic to squish it in, with your other hand. All the while keeping the barrel straight up, to avoid cutting by canting. It is easier than it sounds, and far easier to line up properly than doing so horizontally. When I have done it horizontally, I always have the gun in a gun vice that is clamped down solid to the bench. That way I can push the barrel in up to the first oring and keep my fingers wrapped around the barrel but up against the receiver and then apply a good solid slow powerful and controlled twisting motion with my other hand. Good luck.
 
Barrels can be tricky. If you are cutting the barrel orings like that, and you are pushing the barrel in horizontally, try instead, to put the barrel in vertically, straight up. Let the weight of the barrel rest on the first oring it encounters and then you can slowly press down and twist and push on the oring with a piece of plastic to squish it in, with your other hand. All the while keeping the barrel straight up, to avoid cutting by canting. It is easier than it sounds, and far easier to line up properly than doing so horizontally. When I have done it horizontally, I always have the gun in a gun vice that is clamped down solid to the bench. That way I can push the barrel in up to the first oring and keep my fingers wrapped around the barrel but up against the receiver and then apply a good solid slow powerful and controlled twisting motion with my other hand. Good luck.
I think I may have found the culprit fun part will be trying to fix it. I kept wondering where are the O-ring shavings going so it looks to me like where the grub screw threads into the block there must be a burr, this will require a delicate touch.

IMG_2993.webp
 
Not a burr. As I push the barrel in the block, the o-ring is being pushed into where the grub screw threads into the block, then basically chopped off.

I’m going to try to set the grub screw just right, hopefully that will keep the o-ring in place as it passes by. šŸ¤ž
 
Last edited:
Success!! Removed grub screw and no o-ring material. All back together and no parts left over 🤣.

View attachment 14553
Man, this is a nail biter!! I was confused, at first I thought you were talking about the pin probe/breach o-ring....pics are good šŸ˜‚... was wondering why you'd install o-ring before polishing, now I get it! If you do still have probe out I would lightly take the edge off it it's at all hanging up?Mine would jam into the back of certain pellets, may very well be a cause of its 'diminished' accuracy.
 
That is a beautifully made airgun. Anyone that looks at how that is made and then compares and complains about its price relative to the low end... I feel embarrassed for them. I probably shouldn't say that, or many other things openly, but there it is.
 
Man, this is a nail biter!! I was confused, at first I thought you were talking about the pin probe/breach o-ring....pics are good šŸ˜‚... was wondering why you'd install o-ring before polishing, now I get it! If you do still have probe out I would lightly take the edge off it it's at all hanging up?Mine would jam into the back of certain pellets, may very well be a cause of its 'diminished' accuracy.
Probe looks good.
I know you get what I am doing, but I just want to clarify for anyone reading.

There is the possibility that when I removed the barrel initially from the block the O-ring could’ve been damaged just like it happened as I reinstalled the barrel not having the grub screw flush with the inside of the block.

Two of the six screws that hold the block to the gun were loose.

The screw that holds the cocking arm assembly was loose and the O-ring that basically puts tension on the arm in the closed position was broke.

I just want to make sure that when I polish the barrel that the results I get will only be affected by that change, I do not want to bake in a repair into my results.
 
I have to be honest , IF , I spent the kind of $$$$ for ANY gun that had issues like those , It would definitely be going back to the seller/ warranty center or seller for corrective action or replacement. I don't relish teardowns or fixing any thing that is supposed to be "ready to go" for whatever it's to do. Just my way. Most anything today will be addressed by a manufacturer if addressed in a cordial manner. If not , the social media/ reviews will hurt badly. I move away from said bad performers/ service to something / someone else. Auto, carpet,airguns,firearms scopes& appliances , been there done that, have the receipts and letters;). Good luck in all your endeavors.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top