Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

PCP S400 2-3 shot inconsistency.

Rudix

HAM Specialist
56
71
Country flag
My S400 shoots at least 2 to 3 shots per refill suddenly high and often to the left, the distance is normally around 10-15mm at 25m. I practice with a chronograph all the time and those high shots are at the same muzzle velocity as the shots before and after them. Once it shoots high it will normally shoot 2 -3 shots high and then return to normal. Still trying to figure out why.

These shots seem to be any time after a re-fill, not the first or last shots but often at the "peak" of the velocity curve.

Sadly, till I have found a solution, this means that my normally really accurate S400 will not be used for competition shooting. I have swapped the scope, same result, I am starting to think the barrel "band" that links the barrel to the air-tube is causing this, sometimes not allowing the barrel to return to it's normal position after a shot? Maybe the O-ring on the barrel side is "sticking"?

Any suggestions?

Thanks!
 
My S400 shoots at least 2 to 3 shots per refill suddenly high and often to the left, the distance is normally around 10-15mm at 25m. I practice with a chronograph all the time and those high shots are at the same muzzle velocity as the shots before and after them. Once it shoots high it will normally shoot 2 -3 shots high and then return to normal. Still trying to figure out why.

These shots seem to be any time after a re-fill, not the first or last shots but often at the "peak" of the velocity curve.

Sadly, till I have found a solution, this means that my normally really accurate S400 will not be used for competition shooting. I have swapped the scope, same result, I am starting to think the barrel "band" that links the barrel to the air-tube is causing this, sometimes not allowing the barrel to return to it's normal position after a shot? Maybe the O-ring on the barrel side is "sticking"?

Any suggestions?

Thanks!
Might not be a bad idea to take the band off and lube the oring. Personally i would give the barrel a good cleaning especially if its normally accurate maybe even give it a light polish with jb bore paste and see if this improves things. You might have a little catch in the barrel collecting lead over time
 
Might not be a bad idea to take the band off and lube the oring. Personally i would give the barrel a good cleaning especially if its normally accurate maybe even give it a light polish with jb bore paste and see if this improves things. You might have a little catch in the barrel collecting lead over time
Thanks for the reply!

I agree, think I need to give the oring a lube, I have read somewhere that some people even remove the band completely.

I have tried to clean the barrel a few times, it does not make any difference. It does feel smooth and does not seem to get really dirty. I am shooting JSB 10.43gr pellets at around 850fps. I have tried other pellets but they all share the few high/left shots but mostly do not group as well.

I will try and find some JB bore paste and give the barrel a polish, even if that is not the problem I am sure it can only make thing better, thanks for the suggestion.

When it is shooting normal it is not uncommon to stack 5 shots through the same hole at 25m and it will shoot 5 to 10 "10X's" in a row no problem.
 
Thanks for the reply!

I agree, think I need to give the oring a lube, I have read somewhere that some people even remove the band completely.

I have tried to clean the barrel a few times, it does not make any difference. It does feel smooth and does not seem to get really dirty. I am shooting JSB 10.43gr pellets at around 850fps. I have tried other pellets but they all share the few high/left shots but mostly do not group as well.

I will try and find some JB bore paste and give the barrel a polish, even if that is not the problem I am sure it can only make thing better, thanks for the suggestion.

When it is shooting normal it is not uncommon to stack 5 shots through the same hole at 25m and it will shoot 5 to 10 "10X's" in a row no problem.
Inspect your crown carefully also you might have bumped into something and not really noticed
 
Inspect your crown carefully also you might have bumped into something and not really noticed
I just checked the crown and it is perfect. It has been protected by an air-stripper or silencer all the time. I have tried the rifle without any barrel attachment but it still shoots the few shots high every now and then.

I have now oiled the oring in the brace, will see if it makes a difference tomorrow morning, family day this side today so no time to shoot.
 
I just checked the crown and it is perfect. It has been protected by an air-stripper or silencer all the time. I have tried the rifle without any barrel attachment but it still shoots the few shots high every now and then.

I have now oiled the oring in the brace, will see if it makes a difference tomorrow morning, family day this side today so no time to shoot.
I own 2 AA guns and I agree with @Solo1... Clean that barrel man! If it's a new problem you probably got a bit of a lead buildup or snag in there and need to get it out. If it ends up being a common problem a bore polish may help! My TX will often make 2 small groups on paper (drives me crazy🤪 😂) it will shoot one group then print 2 or 3 elsewhere and then continue back with the original group. The 2 groups on the green and blue dot for example. .177 @ 30Y.
 

Attachments

  • 20241027_184245.webp
    20241027_184245.webp
    299.3 KB · Views: 6
I own 2 AA guns and I agree with @Solo1... Clean that barrel man! If it's a new problem you probably got a bit of a lead buildup or snag in there and need to get it out. If it end up being a common problem a bore polish may help! My TX will often make 2 small groups on paper (drives me crazy🤪 😂) it will shoot one group then print 2 or 3 elsewhere and then continue back with the original group. The 2 groups on the green and blue dot for example. .177 @ 30Y.
Thanks for the reply!

I am convinced it is not a dirty barrel. It will do this immediately after a barrel clean and it will consistently still do it 500 shots later! I have only had this rifle for 2 weeks and it has been doing it since day one.

Even after 500 shots the barrel is not that dirty and one cleaner patch followed by 2 dry patches and it will be clean again. I cannot detect and "tight" spots in the barrel other than the slight choke at the muzzle.

What you describe sounds very similar to my problem. I will try again tomorrow with the lubed oring in the barrel band. If that does not solve it I think it will be time to admit defeat and get rid of the S400, it will be sad because when it shoots well it is a real contender.

It seems to be really difficult to find decent, accurate .177 air rifles in my country, everyone is just selling .22's but .22's are not really suitable for the sub 20 and sub 12 fpe international benchrest classes.

Another issue that I would need to address if I can get rid of this problem is to get at least 40 consistent shots out of a refill, at the moment I get at most 25-30 and that is not enough to shoot a full WRABF card.

I do have a Huma regulator for the S400 that I can try but unless I can solve the "flyer" issue I am not going to waste the time, the 2025 contest season is here!
 
Oh I wanted to ask... is your S400 regulated?
No, I do have a regulator (Huma) for it but I have not installed it, do not think it will have any effect on the flyers as the FPS stays consistent when I get the flyers, it is not caused by speed variations. I chronograph every shot I fire.
 
Last edited:
I own 2 AA guns and I agree with @Solo1... Clean that barrel man! If it's a new problem you probably got a bit of a lead buildup or snag in there and need to get it out. If it ends up being a common problem a bore polish may help! My TX will often make 2 small groups on paper (drives me crazy🤪 😂) it will shoot one group then print 2 or 3 elsewhere and then continue back with the original group. The 2 groups on the green and blue dot for example. .177 @ 30Y.
I had a look again at your groups.

If I do not count the 2-3 "odd" shots I get in every 20-30 shots my rifle will consistently put 10 or more shots through the same hole at 25m, and when I say same hole the hole is so small it looks like maybe 1 or 2 shots. When the flyers happen they are normally around 10-12mm high and sometimes also about 5mm to the left, they will score a 8 or 9 but not worse.

When the rifle shoots well it will shoot 250 out of 250 if the wind is not too bad (and I concentrate) so it is really great. Most of the time the flyers will spoil this so I shoot 246-248's.
 
1 other thought i just had, im not sure how the barrel is attached to the receiver on the s400 but carefully check that also. A loose fit there could give a harmonic problem. Also are you sorting pellets? I know that jsb is slipping in quality.
 
1 other thought i just had, im not sure how the barrel is attached to the receiver on the s400 but carefully check that also. A loose fit there could give a harmonic problem. Also are you sorting pellets? I know that jsb is slipping in quality.
I will check the barrel mounting bolts, thanks for the suggestion!

No, I am not sorting pellets at the moment, I realize that will help but I do not believe it is causing the problem. if it was a case of a bad pellet every now and then I would expect it to be random, not 2-3, sometimes more, shots after each other and then back to normal again. I would also see changes in speed if there were weight differences.

I do check every pellet before loading them and reject a few in every tin, mostly due to damaged skirts. I do check weights on each new tin but if there is no major variation in the first 50 or so I just use the tin. When shooting a contest I will check every pellet.

I have tried JSB 8.44gr, 10.34gr and 13.43gr pellets, they all have the same pattern of flyers.

Shooting the same pellets in my FX Impact M4 with a .177 barrel do not produce these flyers. The "problem" with the FX is that it is difficult to keep muzzle energy below 20 fpe never mind below 12 fpe. The FX is now optimized for the Unlimited 25 and 50m classes where it shines using heavy .22 pellets or slugs.
 
Last edited:
I had a look again at your groups.

If I do not count the 2-3 "odd" shots I get in every 20-30 shots my rifle will consistently put 10 or more shots through the same hole at 25m, and when I say same hole the hole is so small it looks like maybe 1 or 2 shots. When the flyers happen they are normally around 10-12mm high and sometimes also about 5mm to the left, they will score a 8 or 9 but not worse.

When the rifle shoots well it will shoot 250 out of 250 if the wind is not too bad (and I concentrate) so it is really great. Most of the time the flyers will spoil this so I shoot 246-248's.
Yeah your right, those groups are from my TX springer (a bit apples to oranges I admit) so it will NEVER 1 hole repeatedly @25M...but it does suffer this similar problem too sometimes. Now my S510, 25M is a laugh with good pellets. As Solo1 mentioned have you maybe started using a new tin or batch of pellets recently? I have some wrongly labeled (dia) Jsb pellets that while still good quality are useless for competition shooting for me🙄 Personally if you check everything and nothing is out I'd install the reg anyways. Tearing it apart and rebuilding could do wonders....lol it fixed my Slavia somehow😅
 
I will check the barrel mounting bolts, thanks for the suggestion!

No, I am not sorting pellets at the moment, I realize that will help but I do not believe it is causing the problem. if it was a case of a bad pellet every now and then I would expect it to be random, not 2-3, sometimes more, shots after each other and then back to normal again. I would also see changes in speed if there were weight differences.

I do check every pellet before loading them and reject a few in every tin, mostly due to damaged skirts. I do check weights on each new tin but if there is no major variation in the first 50 or so I just use the tin. When shooting a contest I will check every pellet.

I have tried JSB 8.44gr, 10.34gr and 13.43gr pellets, they all have the same pattern of flyers.

Shooting the same pellets in my FX Impact M4 with a .177 barrel do not produce these flyers. The "problem" with the FX is that it is difficult to keep muzzle energy below 20 fpe never mind below 12 fpe. The FX is now optimized for the Unlimited 25 and 50m classes where it shines using heavy .22 pellets or slugs.
Well if this is happening as you say i may indeed be the barrel band or a loose barrel receiver joint. It would seem as you stated earlier that it is a problem of the barrel not always returning to the same spot after the shot. Hope you figure it out!
 
Yeah your right, those groups are from my TX springer (a bit apples to oranges I admit) so it will NEVER 1 hole repeatedly @25M...but it does suffer this similar problem too sometimes. Now my S510, 25M is a laugh with good pellets. As Solo1 mentioned have you maybe started using a new tin or batch of pellets recently? I have some wrongly labeled (dia) Jsb pellets that while still good quality are useless for competition shooting for me🙄 Personally if you check everything and nothing is out I'd install the reg anyways. Tearing it apart and rebuilding could do wonders....lol it fixed my Slavia somehow😅
Oh, did not realize that was shot with a springer!

I have tried a selection of pellets, also thought it might just be a bad batch or miss-match with the rifle. But when I think about it that would not explain why it would shoot perfectly and then change for a couple of shots, if it was a pellet issue the problem would be more random. Once or twice (over many tins of pellets and testing) it changed POI and did not move back, I had to re-zero the scope. That was why I changed the scope as I thought maybe something was moving inside the scope but it made no difference.

I have stripped the rifle three times already, looking for something that was loose or not seated correctly, nothing found and no difference. Will consider installing the regulator, I have it anyway, just at a point now where I feel like I am wasting (valuable practice) time. I have already found a possible replacement for the S400, will know today.
 
Well if this is happening as you say i may indeed be the barrel band or a loose barrel receiver joint. It would seem as you stated earlier that it is a problem of the barrel not always returning to the same spot after the shot. Hope you figure it out!
The receiver to barrel joint is really tight, no chance of movement there so the barrel band is now my number one suspect. I checked the oring and it seems perfect but I did replace it as well as oiled it, will try it today. If I still have the problem today I will take the oring out or just remove the band, I have been told to try leaving the barrel floating as it seems to help in general.
 
The receiver to barrel joint is really tight, no chance of movement there so the barrel band is now my number one suspect. I checked the oring and it seems perfect but I did replace it as well as oiled it, will try it today. If I still have the problem today I will take the oring out or just remove the band, I have been told to try leaving the barrel floating as it seems to help in general.
Yea try that and if it’s still doing it try the jb bore paste and do 30-40 strokes on the full length of the barrel with the paste on a bore mop then clean out as usual.
 
Yea try that and if it’s still doing it try the jb bore paste and do 30-40 strokes on the full length of the barrel with the paste on a bore mop then clean out as usual.
Thanks, will try it if the problem is still there.
 
Last edited:
Time for some feedback!

I managed to shoot for around 2 hours this morning before the heat and very gusty wind drove me inside.

I am cautiously optimistic that things are a lot better. It was a bit windy from the start today, 5 to 25km/h gusting higher (up to 45 km/h) and changing direction but I managed to shoot a bunch of groups and 2 cards. The cards were 248 and 249/250 so not bad for the conditions.

I refilled the rifle a few times and shot entire strings and I could not detect any of the high/left shots but I have to admit the changing wind made it difficult to be sure. Chances are the problem is solved! I walked away from the shoot really happy and excited! It looks like the o-ring in the barrel band was causing the barrel not to return to the same position every time, really hoping that was all it was.

I did notice, today and before that often the groups would open up a bit when the rifle shoots at around the peak of the curve. The peak was around 888 to 890 fps so I thought maybe that was a bit fast. I know from experience on my FX that these pellets were happier at around 850 -860 fps. So I reduced the speed a bit using the restrictor.

My strings now start at about 828 fps and peaks at 850 fps before falling again, I get around 40 to 43 shots before the speed drops below 825 fps and the accuracy suffers. I no longer have groups that open up during the string. The final drop happens at around 120 bar so at that point a refill is needed. Reducing the speed also helped with the shot count, I can now get the 40 decent shots I need per filling to shoot a full 25 shot card with plenty sighters.

Looking forward to more shooting late afternoon or early tomorrow morning, things are looking good!

Thanks for all the advice everyone, I am starting to like the S400 again! (But will still try to get the Steyr I am trying to purchase)
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top