Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Others “HAM Community Target Challenge” 20, 40, 80y

These look affordable and 100 pak





Sadly out of stock

NRA Official Air Pistol Targets B-40 10 Meter Paper 100PK

Just hard to pay money for something in going to shoot up and throw in trash ... No matter how cheap ..lol.


How bout a measure across just the black ? I mean if your hitting outside that you suk and need to stop ..
You mean back to practice right haha
 
You mean back to practice right haha
Lol.. maybe as long I'm not on the same range ..😜.

Them b40/1 targets look pretty nice size for all around . One place had 500 for 20$ but did not see a add to cart ..lol go figure .

Probly like the other challenge you just pick a good all around target for 10m out and printable so everyone can be equal ..

Then I can mod it in my editor to fit a range distance / small or larger or whatever bulls

tar2w.webp
Or whatever I like
target @myway.webp
25y try
25yard,printed,iron,r9.webp

2 targets printed on one paper the cut in half and hung and shot
 
Last edited:
Lol.. maybe as long I'm not on the same range ..😜.

Them b40/1 targets look pretty nice size for all around . One place had 500 for 20$ but did not see a add to cart ..lol go figure .

Probly like the other challenge you just pick a good all around target for 10m out and printable so everyone can be equal ..

Then I can mod it in my editor to fit a range distance / small or larger or whatever bulls

View attachment 7823
Or whatever I like
View attachment 7824
25y try
View attachment 7825

2 targets printed on one paper the cut in half and hung and shot
Forgot ..

sizetarget.png

Inaugural 50y try maybe about a 33? Maybe .. terrible..😭

inauguration50ychallange.webp
 
The black nerfs to be at least 3 inch regardless to see at 75-100y on irons or do like the other changes and use a bull so small you need a 24x scope to see it .. all they do is leave folks out of there challenge . Make it fun and fair for all not just snob pcp guys only ..lol
 
I vote that we use printable targets. Add a link to the target and if everyone prints them 1:1 scale we should all be on the same page.

I like these challenges. It is a good way to promote airgun accuracy and helps get people out shooting.

John
For the 20y single shot target, I agree.

For preview
IMG_2042.webp
 

Attachments

The black nerfs to be at least 3 inch regardless to see at 75-100y on irons or do like the other changes and use a bull so small you need a 24x scope to see it .. all they do is leave folks out of there challenge . Make it fun and fair for all not just snob pcp guys only ..lol
I thought we talked about “The Soup Can 50” 😁
 
For the 20y single shot target, I agree.

For preview
View attachment 7830

I thought we talked about “The Soup Can 50” 😁
Well too bad no thumbs down on all that.. you may as well joine them challenges at air gun nation instead or copy acting all over again . Then you leave folks out .. sweet..

Here's something everybody can use scoped , irons , 10m to 100 yards ..

Normal/scope.,................... Irons
printarget.png
Just cut in to 2 singles

Its ok, I'd not join anyway cause I'm not printing or buying targets .. them were for show and tell ..
 
Well too bad no thumbs down on all that.. you may as well joine them challenges at air gun nation instead or copy acting all over again . Then you leave folks out .. sweet..

Here's something everybody can use scoped , irons , 10m to 100 yards ..

Normal/scope.,................... Irons
View attachment 7834
Just cut in to 2 singles

Its ok, I'd not join anyway cause I'm not printing or buying targets .. them were for show and tell ..
We need to start the hateful challenge

 
We need to start the hateful challenge

Lol as long as we do something....hopefully Hateful will recant....I so yearn to slay him and his R9 with my TX😆, Lols. I do some woodworking sometimes and I own a huge set of forstner bits. Was gonna make a ton of different size stencil outta 1/4 ply, just need spray paint and off 2 shooting 4 cheap!
 
Lol as long as we do something....hopefully Hateful will recant....I so yearn to slay him and his R9 with my TX😆, Lols. I do some woodworking sometimes and I own a huge set of forstner bits. Was gonna make a ton of different size stencil outta 1/4 ply, just need spray paint and off 2 shooting 4 cheap!
You tx can't shoot with the hw . How will you ain't it with out irons ? Your gun falls short hanging around here ..
 
I vote that we use printable targets. Add a link to the target and if everyone prints them 1:1 scale we should all be on the same page.

I like these challenges. It is a good way to promote airgun accuracy and helps get people out shooting.

John
I also like the idea of printable targets. I searched for printable targets and found these
 

Attachments

I also like the idea of printable targets. I searched for printable targets and found these
Ya, all that looking and really nothing that really grabs ya.. what's funny is no body offered a knock off nra / official to print up ..

Did not open a pdf from a unknown source.. it's that oxymoron called internet security .🤤
 
😂 you’re still moving in the wrong direction money wise.
He draws bullseyes with a lumber crayon on the inside of cereal boxes.

If he wants I’ll mail him some, something tells me that “free” is his weakness lol.
It's you money man .. mine says in my pocket or spent on mo' pellets , mo' pellets , mo' pellets . Not paper to throw in the trash ..lol

Ok for irons

fixedtatget1.webp
crosmanonlytotalscore.webp
Just can't remember how far I can see them ... .
 
Why don't you guys just trace washers with a sharpie? Buy a pack of card stock and pic a couple size washers to trace. Like 1/4” fender for 20 and 100 and say a half inch for 30 and 75. Sharpies are a lot cheaper than printer ink and last quite a while.
 
Why don't you guys just trace washers with a sharpie? Buy a pack of card stock and pic a couple size washers to trace. Like 1/4” fender for 20 and 100 and say a half inch for 30 and 75. Sharpies are a lot cheaper than printer ink and last quite a while.
Your not spending money correctly.. it don't one-up or keep with the Joneses..🥴

(Fla22)
I should ask what dont my " cereal box" 😏 and crayon bull do that them printed or store bought does ?

It's a circle , the center is the center of any circle no matter what size it is , if you know a good group is or see the center hot it's a good hit(s) , if you know the ring with size the scoring is the same , i get nice punched holes not rips, and after it's shot up it goes in the trash just the same .. I mean what being you tried to ridicule me above on my homemade bulls ..

dumb_.png
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top