Ghost Changing the factory pressure gauges

[Corvid_Hunter]

I was thinking about changing the factory gauges on the Ghost to something like the white faced 250 bar Wika gauges I had on my Impact. They're about 28mm if I remember right. Has anyone change the gauges on their Ghost yet?

 

[Solo1]

I did 300 bar for bottle and a 250 bar for the reg both 28mm but mine are black face white numbers

 

[Franklink]

I was thinking about changing the factory gauges on the Ghost to something like the white faced 250 bar Wika gauges I had on my Impact. They're about 28mm if I remember right. Has anyone change the gauges on their Ghost yet?

Yep. Although I went with black faces....

Copied and pasted from my Huma email order.....
Wika Black Mini Pressure Gauge 28 mm 315 Bar G1/8 BSP
Wika Black Mini Pressure Gauge 28 mm 250 Bar

They both have the same threads, not sure why it isn't listed on the 250bar reg. Prob goes without saying but i used the 315 for the bottle pressure side, and the 250 for the regulated pressure.

I don't have any great photos but found this one on my phone.....I chose to not opt for the black trim pieces around the outside of the gauge, got brass endcaps for the shroud so seemed fine to stick with the brass.

 

[hameditor]

I was thinking about changing the factory gauges on the Ghost to something like the white faced 250 bar Wika gauges I had on my Impact. They're about 28mm if I remember right. Has anyone change the gauges on their Ghost yet?

What is the benefit? Improved reading accuracy?

 

[Corvid_Hunter]

What is the benefit? Improved reading accuracy?

I find the factory BRK gauges a little on the small side. I think they look good as they are small and unobtrusive, but it also makes them harder to read. Last night was the first time I filled the Ghost since I received it and I notice the tank pressure gauge seems to be a little 'notchy'. As it was filling it would jump from one line to the next. Not a very smooth operating gauge. That's not to say that it isn't accurate though.

 

[Solo1]

What is the benefit? Improved reading accuracy?

That and i like having the 300 bar for the bottle. If the gauge stops at 250 you wouldn’t know if you were actually overfilling.

 

[Corvid_Hunter]

That and i like having the 300 bar for the bottle. If the gauge stops at 250 you wouldn’t know if you were actually overfilling.

That is a very good point.

 

[hameditor]

Has anyone tried the Sekhmet Gen 2 gauge? 2nd Generation Sekhmet Digital Pressure Gauge 28mm Pro 1/8 BSPP 300 bar

 

[Franklink]

Has anyone tried the Sekhmet Gen 2 gauge? 2nd Generation Sekhmet Digital Pressure Gauge 28mm Pro 1/8 BSPP 300 bar

Not the second gen, but I had a couple of the first gen when they were original nally released 5-6? years ago.

I didn't find any fault with them. I prefer to not need to charge my guns so eventually converted back to traditional wika gauges.

 

[Sub 12 airgunners]

Yes we have the gen 2 on our one, we have the 25mm on the bottle and the 28mm on the reg they fit perfectly work very well, easy to see, the battery is much better on these gen2 gauges the old one seemed to need charging all the time these i only charge them now and again, a nice upgrade IMO

 

[Danman]

Yes we have the gen 2 on our one, we have the 25mm on the bottle and the 28mm on the reg they fit perfectly work very well, easy to see, the battery is much better on these gen2 gauges the old one seemed to need charging all the time these i only charge them now and again, a nice upgrade IMO






View attachment 5932View attachment 5933

Words cannot express how much better looking the original moa rail is to my eyes Looking good otherwise! And as a hunter I'd be afraid of snagging it on stuff. You put the original grip back on?! I just ordered the Fab Defense one (no small task in Canada) and it should be here by June! The gauges work for me for now but they will get replaced some day I'm sure with the wika's.

 

[Sub 12 airgunners]

Words cannot express how much better looking the original moa rail is to my eyes Looking good otherwise! And as a hunter I'd be afraid of snagging it on stuff. You put the original grip back on?! I just ordered the Fab Defense one (no small task in Canada) and it should be here by June! The gauges work for me for now but they will get replaced some day I'm sure with the wika's.

that is our latest ghost the grip is standard on this one we are just mucking about with bits and bobs to see what we like this is the other one, over the moon with how the it turned out it was before we had the sekhmet gauges so we just straightened the standard ones up

 

[attk11]

Yes we have the gen 2 on our one, we have the 25mm on the bottle and the 28mm on the reg they fit perfectly work very well, easy to see, the battery is much better on these gen2 gauges the old one seemed to need charging all the time these i only charge them now and again, a nice upgrade IMO






View attachment 5932View attachment 5933

Where can I get that scope rail? I run my scope pretty far forward and this will allow me to move it further, I also love the built in level.

 

[Corvid_Hunter]

that is our latest ghost the grip is standard on this one we are just mucking about with bits and bobs to see what we like this is the other one, over the moon with how the it turned out it was before we had the sekhmet gauges so we just straightened the standard ones up

View attachment 5937

Which grip is that? It looks comfortable.

 

[Danman]

Which grip is that? It looks comfortable.

Looks to be an ergo grip? I was looking at Hogue, Ergo, Fab defense, Magpul. Only thing in Canada (AK style) was a brown Magpul and the black Hogue. Even with shipping their not expensive to order, its just the wait that kills me, Did you get gauges put on yet Corvid Hunter? I will play around with the trigger when the grip arrives. I can wait... ☹

 

[Corvid_Hunter]

Looks to be an ergo grip? I was looking at Hogue, Ergo, Fab defense, Magpul. Only thing in Canada (AK style) was a brown Magpul and the black Hogue. Even with shipping their not expensive to order, its just the wait that kills me, Did you get gauges put on yet Corvid Hunter? I will play around with the trigger when the grip arrives. I can wait... ☹

No gauges yet, and I haven't been out shooting either. Between snow and work I haven't been able to get out.

 

[Solo1]

Where can I get that scope rail? I run my scope pretty far forward and this will allow me to move it further, I also love the built in level.

I think thats a alpha or delta accessory. Aoa has them

Daystate Daystate RACE Scope Rail for Alpha/Delta Wolf - Parts

<div class="woocommerce-product-details__short-description"> <p>Daystate RACE Rail Intermount extended scope riser rail. Features twin mounting points for added rigidity.</p> <ul> <li>Fits Alpha Wolf and Delta Wolf, and other models with 11mm top dovetail. Converts 11mm dovetail to Picatinny...

www.airgunsofarizona.com

 

[Danman]

No gauges yet, and I haven't been out shooting either. Between snow and work I haven't been able to get out.

Ah sounds like my life right now, minus the snow , its wind and rain here mostly. Gotta bunch of pellets to test and chrono for it but no time at the moment, soon though

 

[attk11]

I think thats a alpha or delta accessory. Aoa has them

Daystate Daystate RACE Scope Rail for Alpha/Delta Wolf - Parts

<div class="woocommerce-product-details__short-description"> <p>Daystate RACE Rail Intermount extended scope riser rail. Features twin mounting points for added rigidity.</p> <ul> <li>Fits Alpha Wolf and Delta Wolf, and other models with 11mm top dovetail. Converts 11mm dovetail to Picatinny...

www.airgunsofarizona.com

it looks close but is different, it doesn’t have the bubble level in the back and mounts differently.

I wonder if it has 20 MOA build in.

 

[Sub 12 airgunners]

Where can I get that scope rail? I run my scope pretty far forward and this will allow me to move it further, I also love the built in level.

The rail is a standard Alpha wolf rail

Which grip is that? It looks comfortable.

The Grip is the ergo chubby but you have the mod the ghost to accept it as the ergo is AR fitting and the Ghost is AK