Avenge-X Avenge X twist rate

[TerryE1]

I got a 1:24 on my .25. It’s a rough measurement since I was too lazy to remove barrel out of the breech.

 

[PasadenaMike]

Is that a good twist for slugs ? Not that I shoot slugs but just curious

 

[Hateful McNasty]

Why would you need to remove the barrel? Any rotation in a length = the sum . So if you get 1/4 turn in 6 inch of barrel that's 1 in 24 or a 1/2 turn in 8" is 1 in 16 and so on whatever..

Maybe that twist rates could be added as a part of the reviews of guns ?

Be handy I guess if included in ....

Air Venturi Avenge-X Test Review .22 Caliber - Hard Air Magazine

There's no doubt that the Avenge-X represents outstanding value in the market. This is due to it's slew of features, quality and adaptability

hardairmagazine.com

 

[hameditor]

Why would you need to remove the barrel? Any rotation in a length = the sum . So if you get 1/4 turn in 6 inch of barrel that's 1 in 24 or a 1/2 turn in 8" is 1 in 16 and so on whatever..

Maybe that twist rates could be added as a part of the reviews of guns ?

Be handy I guess if included in ....

Air Venturi Avenge-X Test Review .22 Caliber - Hard Air Magazine

There's no doubt that the Avenge-X represents outstanding value in the market. This is due to it's slew of features, quality and adaptability

hardairmagazine.com

Good suggestion, we'll take a look at that.

 

[Hateful McNasty]

Good suggestion, we'll take a look at that.

Be handy .. gets asked often..

 

[TerryE1]

Why would you need to remove the barrel?

I'm lazy..

It did take me 24" to make a full rotation/

 

[Hateful McNasty]

I'm lazy..

Ya.... Me too. .

Looking at the posts on a avenger I seen claimed from 1-6 to 1 -30" lol. One guy on the 1-30 thread said the rifling looked straight instead of spiraling.. lol. ( Regular avenger not x) . I guess why it's better to check for sure yourself over hearsay . Then that subject to change without notice between his and yours.

 

[MountainSportAirguns]

Why would you need to remove the barrel? Any rotation in a length = the sum . So if you get 1/4 turn in 6 inch of barrel that's 1 in 24 or a 1/2 turn in 8" is 1 in 16 and so on whatever..

Maybe that twist rates could be added as a part of the reviews of guns ?

Be handy I guess if included in ....

Air Venturi Avenge-X Test Review .22 Caliber - Hard Air Magazine

There's no doubt that the Avenge-X represents outstanding value in the market. This is due to it's slew of features, quality and adaptability

hardairmagazine.com

Sometimes it is, problem is people don't listen