Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Spring/Piston Whuzzat? A Hungarian LG 527, thats whuzzat....

Kragman1

HAM Sniper
447
1,173
Country flag
Last edited:
I have a thing for oddball springers. Not all of them, but sometimes I get a good vibe from weird guns. It happened again at the Carlisle show, and.... viola:

20250505_212108.webp

A gen-u-ine LG 527! In .22 no less.


What is an LG 527? You don't know?
Well I don't know either. But I like it. 👍

It seems like a deluxe version of a basic rifle. The polishing and bluing is actually good. All steel construction, though I'm not going to swear to that from a few test shots. The bore and muzzle crown appear to be excellent. In fact, all of the machining does. Tight fork. Tight chisel-style lockup. The 11mm dovetails appear to have good geometry too, but I will find out once I mount a scope.

The sights are basic versions of good adjustable sights, and blade & notch proportions are ideal. Not German quality design at all, but perfectly functional.
The same goes for the trigger - it's no Rekord but it's clean and it doesn't need to be forced, just fired. And it should get better with use. This rifle doesn't have much use on it yet.

VERY light, and very easy to cock. Creaky to cock, with spring drag then some buzz when fired. Flattened breech seal isn't accomplishing anything. Still made close to 600 fps with 11.9 Hobby pellets.
That's a scorching 9 fpe, people. 😁

I did find a few brief references to it online, and 2 claims of excellent accuracy. Well, I put three 5.53 FTT's into a tiny group at 9 yards with open sights and my troublesome eyes. Amazing.

The lower right shot was just a quick sighter to find POI, then I made a crude sight adjustment and shot 3 more into the little group. What looks like it could be the third hole pointing at 2:30 is just a tear. One is slightly low, two are almost on top of each other.

Screenshot_20250505_213125_Gallery.webp

It will be a while I'm sure before it gets much attention, but I'm really looking forward to working with it.


ps - it may be a Relum. And Relum may be part of FEG. Maaaaybe....
 
I'll tell ya' what it is Krag, it's butt-ugly! That's what it is...... 🤣
Sorry, Bud, but someone's gotta' break it to ya'... We don't want you to embarrass yourself. I know, it's not all about appearances, but try telling that to the ugly duckling....

Seriously though, Brian, that's an interesting find. Looking forward to learning more about it.
 
OK, a mini update on this rifle, since I can tell that so many people are dying to know more.... 🤣

I found some good things and some bad.

First the good:

- Made by F.E.G. in Hungary.
- Jeez, the fit in the forks and the lockup is good. Basically ideal.
- All of the metal work looks good to this old machinist.
- All of the polishing is modest but very even and the blueing is well done.
- Turns out that the (all steel) trigger has a suspiciously Rekord-like adjustment screw behind the blade, and with one quick turn I can verify that it works the same way.
It went from "perfectly good" to "well, how about that!" good. No sear adjustments needed (or available, I assume).
I am very pleased. 👍
- I gave the modern breech seal a mini-boost (2 turns of dental floss) but it really didn't need it. It may help the rifle break 600 fps with 11.9 Hobby pellets though, so we'll see.
- I low mounted a Hammers 3-9x32 AO scope, and it seems like a great match. Plus, the rifle is still super light, even including the scope.
- It's super light on the wallet too - neither the rifle nor the scope were "investments" yet they promise lots of fun to come.
- I know from punking around in my basement with the sights that it shoots very well.
- very, very easy to cock, and has a nice little firing cycle but makes good power. Any 10 or 12 year old should be able to handle it fine, yet it's clearly good for adults.
- Sights are economy steel, but have an excellent sight picture for target work. I think they're too fine for most hunting, but if course you could hunt with them if you had a mind too.

The bad:
- The cocking shoe drags along the spring during cocking. I hate that.
- The barrel really leans to the right. I doubt that it's from manufacture, probably some invisible mishap along the way. Either way, easy enough to straighten.
- The looks are, ahem... polarizing.
- I have no idea where to get a piston seal.
- It has a hard plastic buttplate, not a rubber strip. But I will try to find something suitable.

I will have to spend some time "pitting" this rifle against the Haenel 303, the Diana 27 and the Cometa 220.

Maybe the winner can go head to head vs the HW30s...?
That seems like a David vs Goliath scenario for sure.
 
Last edited:
And to add - a little internet searching was helpful. This rifle was know by many names: Relum, Telley, Zeint Marla, Zephyr, Taurus and others.
People who know them like them very much, with the exception that they came with an inner and outer mainspring that was evidently a gimmick.
That said, I ran across a couple of people having replaced that with a Diana 34 spring and being very happy with that arrangement.
 
An update 7/27/25:

I got this rifle to the range today, along with an '81 Diana 24, a Wischo (BSF) 55N and a very fine little Weihrauch 55M Champ (which I may have been the first person outside of the factory to snug the screws on!).

20250727_135459.webp

All rifles shot well but the "oddball" LG 527 kinda stole the show. I shot it at 40 feet with open sights and JSB 14.35's which were loose in the bore. It did not chrony well or shoot well with them. 445 fps, and the sloppy group below:

Screenshot_20250727_202929_Gallery.webp

After switching to much better fitting H&N FTT's (485-490 fps) I shot fine little groups @ 40 feet (rested, all groups/pellets).
The flyer wasn't part of the group below. And I may have caught myself dropping that low shot too, but I usually struggle most with elevation when I shoot open sights so I think that low shot just goes with the open sights territory. That's 5+1 shots below:

Screenshot_20250727_202340_Gallery.webp

Pleased with that, and the way it was shooting little bits of things off the 25 yard berm, I decided to break down and mount my "emergency scope" a non-AO Bushnell 2-7, juuust to see what I could see. Last shots of the day, couldn't wait to get out of the cool but very humid air!

The results were impressive. "Groups" shot while making minor scope adjustments showed my adjustments precisely. No groups to show but any bit of debris on the back berm that I decided to get rid of simply "blinked out" when I pulled the trigger. like magic.

My rifle is a rough cocking gun that needs polishing/polished washers in the fork and also a spring guide, which likely means replacing the OEM dual spring setup (if it's still in there.) with something good. It's so easy to cock the rifle now (easier than an HW30) that I may just try to give it a little boost. Starting with rejuvenating the leather seals. Likely ending with a conversion to a traditional single spring.

This is a genuinely fun rifle and I'm having a ball with it. Looking forward to smoothing out some of the rough spots and making it the best it can be.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top