Others Tuxing 6.9 L tank

[Solo1]

Does anyone have any experience with this tank?

 

[Solo1]

Well i have 2 of these so far the big 1 and a 3 l and so far so good. Not dot certified but i fill from my compressor. Much cheaper the only thing i don’t like is the gauges are in psi. I have a airventuri 100 cc tank that the valve has gotten to the point where i can’t shut it off and i see they have a different valve now. Valves go from about $200-250 so $200 for a new tank is a no brainer for me. Will add if i have any problem.

 

[Renée]

Look fwd to your update, currently I have a tuxing 2 cyl compressor it works great after some mods...but that is off-topic...I fill my Big White from Broncato (sp?) in So. Cal (USA) now out of hydro. So possible time for replacement.
so far my valve is just fine, tank ALWAYS filled prior 200 bar (2900 psi) filled to 310 bar (4500psi).

 

[Solo1]

Look fwd to your update, currently I have a tuxing 2 cyl compressor it works great after some mods...but that is off-topic...I fill my Big White from Broncato (sp?) in So. Cal (USA) now out of hydro. So possible time for replacement.
so far my valve is just fine, tank ALWAYS filled prior 200 bar (2900 psi) filled to 310 bar (4500psi).

Well ive only had them a couple months but so far they are fine. Like the 3 l not too big or small good size for carrying on my Quad.

 

[Playingdead]

I have a 9L tank and it is great. The valve is where you should upgrade. Order the tank separate and a good valve (even the upgraded Amazon one is good). DonnyFL makes an adaptor for the threads on the tank to use better valves as well. I got the cheap dual gauge and it broke the second time I topped off.