PCP Snowpeak Max 1 and H&N Slug HP II Sampler

[SpindleB]

Bought the Sampler just to see if the Max 1 is a picky slugger. Appears to just like them all.
Reg setting 200bar
Air 250bar (on tether)

Groups at 45yards were all about 1 to 1.5 inch. I'll probably drop the reg down to 175bar and see if the groups tighten up.

28gr


30gr


32gr


34gr


36gr

 

[Dogowski]

Bought the Sampler just to see if the Max 1 is a picky slugger. Appears to just like them all.
Reg setting 200bar
Air 250bar (on tether)

Groups at 45yards were all about 1 to 1.5 inch. I'll probably drop the reg down to 175bar and see if the groups tighten up.

28gr
View attachment 15626

30gr
View attachment 15628

32gr
View attachment 15631

34gr
View attachment 15630

36gr
View attachment 15629

How many shots do you get out of it before refilling? With its larger air supply in the rifle i am curious! Thanks

 

[SpindleB]

How many shots do you get out of it before refilling? With its larger air supply in the rifle i am curious! Thanks

No clue, shooting off my tripod tethered to a 6.8l tank sitting at around 3500psi. That is a function I will explore down the road a bit.

Been trying to figure out if pellets or slugs shoot best but so far everything seems to shoot about the same.

I'll drop the pressure down to 150bar and run through the various pellets and slugs. Then 175bar. 200 bar pushes everything hard which may be suboptimal.

200 bar is a 70FPE .25 rifle with most slugs and pellets.

 

[SpindleB]

No clue, shooting off my tripod tethered to a 6.8l tank sitting at around 3500psi. That is a function I will explore down the road a bit.

Been trying to figure out if pellets or slugs shoot best but so far everything seems to shoot about the same.

I'll drop the pressure down to 150bar and run through the various pellets and slugs. Then 175bar. 200 bar pushes everything hard which may be suboptimal.

200 bar is a 70FPE .25 rifle with most slugs and pellets.

Set the reg to 150bar. 825FPS with 28gr .2495 slugs. Not going to waste slugs at that pressure. I'll bump up to 175bar and try later.

 

[Cantona256]

No clue, shooting off my tripod tethered to a 6.8l tank sitting at around 3500psi. That is a function I will explore down the road a bit.

Been trying to figure out if pellets or slugs shoot best but so far everything seems to shoot about the same.

I'll drop the pressure down to 150bar and run through the various pellets and slugs. Then 175bar. 200 bar pushes everything hard which may be suboptimal.

200 bar is a 70FPE .25 rifle with most slugs and pellets.

That’s pretty outstanding actually.