The Reximex RP 11 PCP air pistol is now available for pre-order at Pyramyd. It’s a new version of the company’s PCP pistol platform featuring an aluminum 1911-style pistol grip.
The 1911 grip has checkered grip panels made from Turkish walnut. This provides a classic look and feel that many shooters prefer because of its angle and handling characteristics.
Compared to the molded grips on the other versions of the RP series, this 1911 grip offers superior ergonomics according to many shooters. It feels natural in the hand and promotes accurate aiming, Pyramyd explains.
The Reximex RP 11 PCP air pistol is available in both .177 and .22 calibers. It’s also available in both black and silver finishes.
Either way, the RP 11 has a 9-shot (in .177 caliber) magazine pellet feed that’s operated by side lever cocking on the left side of the frame.
There’s an internally-adjustable regulator and the 50 cc capacity air tube can provide enough air for up to 50 shots at around 610 FPS in .177 caliber from one fill of 3,625 PSI High Pressure Air.
There’s an included elevation-adjustable post front fiber optic sight. The adjustable two-dot notch rear fiber optic sight lead to accurate aiming without needing to purchase additional equipment. However a red dot sight can be fitted if desired by the owner.
The 1/2 -Inch UNF threaded muzzle adapter allows a silencer to be added if required to reduce the report.
The photograph below shows how similar the RP 11 is to the “target grip fitted” Reximex RP 2 PCP air pistol that has been available at Pyramyd for a couple of years.
The overall length of the RP 11 is 13 Inches. It weighs approximately 2 Lbs 3 Oz.
Latest indications are that it will be available from June 17, 2026.
BUY FROM PYRAMYD
Reximex RP 11 PCP Air Pistol 0.177
The post Reximex RP 11 PCP Air Pistol appeared first on Hard Air Magazine.
