PCP Oh crap the S510 is leaking

[FL22]

No tape needed 4 days, lost 40 bars.

great, I feel sick. Bad times.

Have to call tomorrow, 60 day return window is closing.

Loosing marbles sorry for rant.

 

[FL22]

I pulled the stock, the screw that holds the “L” block? gauge to gun was loose. Hand tighten and pumped it back to 250 bar. I’ll check it tomorrow afternoon, have to make a decision ASAP.

 

[Mike Brown]

Got my fingers crossed hoping it works. I've only got 2 pcp's and so far, no leaks....

 

[Danman]

No tape needed 4 days, lost 40 bars.

great, I feel sick. Bad times.

Have to call tomorrow, 60 day return window is closing.

Loosing marbles sorry for rant.

Not sure where I've been but....NOOOOOOO hopefully it's just that! But all is OK, Sub12 has a nice S510 reseal video just in case.

 

[PasadenaMike]

I have a leshiy air tube on monitor right now you’re not alone.

 

[PasadenaMike]

I have a leshiy air tube on monitor right now you’re not alone.

192 since last nightit’s so sensitive you hold it she goes to 193

 

[Hateful McNasty]

Someone needs to invent somthing like this

 

[PasadenaMike]

Someone needs to invent somthing like this
View attachment 6563

lol best thing ever created

 

[Hateful McNasty]

lol best thing ever created

Saved me more then once..

 

[PasadenaMike]

Saved me more then once..

Yeah except the one time on my old Kawasaki with an inner tube cut by a razor nothing would’ve helped that

 

[Danman]

My guns (this is fairly common) will fill up nice to max and then 'drop' a tad off the needle next day sometimes. If I top it up again it will stay put the second time. Being a person who pumps my guns by hand leaks are scary, I'd suspect once I have a compressor it wouldn't be as bad, as the thought of degassing one, fixing it and then hand pumping from empty doesn't interest me at all.
@FL22 you said someday you want a nice springer as well. With your luck I'd say...YES you should get one

 

[Hateful McNasty]

Yeah except the one time on my old Kawasaki with an inner tube cut by a razor nothing would’ve helped that

Been there as well....lol

 

[FL22]

Well there may be hope .

 

[FL22]

My guns (this is fairly common) will fill up nice to max and then 'drop' a tad off the needle next day sometimes. If I top it up again it will stay put the second time. Being a person who pumps my guns by hand leaks are scary, I'd suspect once I have a compressor it wouldn't be as bad, as the thought of degassing one, fixing it and then hand pumping from empty doesn't interest me at all.
@FL22 you said someday you want a nice springer as well. With your luck I'd say...YES you should get one

Yeah the next day temp / gauge settling I’m used to that especially with my S510’s large plenum, the Airacuda does it a little too, no big deal.

When I went to work, I had it filled at 250 bar. Got home yesterday and it was down to 210 approximately.

That 11 PM pic was immediately after filling it, and it doesn’t look like it has moved whatsoever to me.

And yes, bro, I do not have the best luck. I got that dark cloud on the leash and take it everywhere I go. I do need a springer. As a matter of fact, I’m sweet talking the accountant.

 

[FL22]

Got my fingers crossed hoping it works. I've only got 2 pcp's and so far, no leaks....

Thanks Mike.

 

[FL22]

@Danman I’m the owner of a springer!!!

 

[PasadenaMike]

Try an Edgun digital gauge it moves if you look at it wrong

 

[FL22]

Try an Edgun digital gauge it moves if you look at it wrong

Yikes !!! Oh no… back! digital gauge satan!!
Not for me bro…. lol

 

[PasadenaMike]

Yikes !!! Oh no… back! digital gauge satan!!
Not for me bro…. lol

Yeah like if you grab the tube it’s so sensitive it goes up one bar within seconds

 

[PasadenaMike]

The new L2 .177 was leaking from the rear drain. Brian repaired it for me. It’s nice being close to EGW. Luckily I was off yesterday so I went down.