Condor New Huben Condor Regulator with 50cc power plenum 😁

[Northeastbeast]

One more piece has come for my custom 257 cal Airforce condor. This is new for 2024 made by Huben power. It is fully adjustable and has a 50cc plenum. It also comes with a tester body so no need to have to keep filling and degasing your bottle.

Reg is made from stainless steel and is built like a tank. Very heavy duty. 4500 psi input and adjustable from 10psi to 4500psi output.
M18x1 thread for most carbon fiber bottles. They offer 2 forms of shipping one takes a few days and other takes about 2 weeks. They make a handful of different style regs for the airforce line up also somethingfor yhe AEA llineup. I will update as i go to the regs workings and or issues.

 

[T3pRanch]

I don't see a burst disk for safety. Does it have one?

 

[Northeastbeast]

I don't see a burst disk for safety. Does it have one?

You ever seen a burst disk on a huma regulator? Me nether

 

[T3pRanch]

I ask a fair question. No need to come off like I broke some taboo. If you aren't concerned about such a safety feature then that is ok with me. I however apparently have a different opinion. Some aftermarket parts are not as well thought out or engineered as they could be.

 

[Northeastbeast]

I ask a fair question. No need to come off like I broke some taboo. If you aren't concerned about such a safety feature then that is ok with me. I however apparently have a different opinion. Some aftermarket parts are not as well thought out or engineered as they could be.

I slapped 4500 psi init and let it sit for 4 days with out issue. They are made better then most. Surprisingly well

 

[T3pRanch]

I purchased a Superwell a number of years ago. It game me nothing but trouble, unfortunately, so it now resides in my parts bin. I have a Doug Noble spring and hammer in my .257 Condor (barrel from R&L).

 

[Northeastbeast]

I purchased a Superwell a number of years ago. It game me nothing but trouble, unfortunately, so it now resides in my parts bin. I have a Doug Noble spring and hammer in my .257 Condor (barrel from R&L).

The huben regs are knocked off quite a bit. If you didnt get it with a authentic product card it was probably a fake. Ebay is where 99% of the fakes are sold.

 

[pan60]

ebay allows the sale of a LOT of counterfit crap. even if you report it just stays.
about the only thing i get of ebay anymore is old stuff and then i use caution

 

[Northeastbeast]

ebay allows the sale of a LOT of counterfit crap. even if you report it just stays.
about the only thing i get of ebay anymore is old stuff and then i use caution

Thats a whole lot of facts sir

 

[elwoodblues]

I got mine direct from HubenPower but I got the 19cc plenum ver as mines a .22 . it is authentic and works great
15.4 @900 18.1 @ 870 over a hundred shots from 360cc and 300bar fill

 

[Martinv1963]

Probably mine is not an original Huben 19cc.... I bought it at Aliexpress.
I just get 820fps with 18grains, (TALON not CONDOR) with a 65 grams hammer and a reinforced spring. If any idea to get it better, please be my guest.

 

[Northeastbeast]

Probably mine is not an original Huben 19cc.... I bought it at Aliexpress.
I just get 820fps with 18grains, (TALON not CONDOR) with a 65 grams hammer and a reinforced spring. If any idea to get it better, please be my guest.

Get a bigger plenum, Condor valve and longer barrel

 

[CTAirgunner]

.257 calls for 85 grain AVS !!

 

[Pumacarl]

Get a bigger plenum, Condor valve and longer barrel

That would be a solution for @Martinv1963, but it negates the reason someone would buy a Talon, and not a Condor, in the first place. If size matters and if you are going for just the most power in the smallest form (I am doing this too) then I would take a guess that one of these: [ HP One Piece Top Hat And Stem - TalonAirguns ] might work, and bring the shot count down to about 5 good ones. I might try this soon.

 

[Martinv1963]

That would be a solution for @Martinv1963, but it negates the reason someone would buy a Talon, and not a Condor, in the first place. If size matters and if you are going for just the most power in the smallest form (I am doing this too) then I would take a guess that one of these: [ HP One Piece Top Hat And Stem - TalonAirguns ] might work, and bring the shot count down to about 5 good ones. I might try this soon.

Most probably that's my problem.... Thanks. I'll disassemble the top hat to see how it looks like from inside.

 

[Martinv1963]

Most probably that's my problem.... Thanks. I'll disassemble the top hat to see how it looks like from inside.

Yesterday I disassembled the top hat valve, and found 3 tiny holes. I carefully enlarge them and got 950 fps instead of 820 fps.(18 grains pellets) Good enough for the 19cc plenun. See the picture in the process before finished and polished