Others I need help with Scope/Mount suggestions. For Airforce Condor SS

[Chief 10-Beers]

When Pyramid sent My Condor SS They included a set of Rings, BKL 200 Series. They are way to short. I have to seriously tilt My head to get any kind of Eye relief. Any suggestions? Do I switch to Picatinny from Dove Tail, or maybe even go to a High "One piece High Mount? What do you recommend to fix this? I am already out $45 for this set, I just want to buy once and be done. I have not been able to find an 11mm to 11mm Riser that will allow Me to use the Same dove tail Rings that I already have. Let Me know what you other Airforce Shooters us. Thanks in advance!

 

[wolfmangreg]

I have Sportsmatch dovetail rings in high & extra high, both for 30mm tubes, that are without homes. PM me your address & I'll send a set to you, or both if you want to experiment.

 

[wolfmangreg]

 

[Chief 10-Beers]

Thanks so much for the Offer My Friend, but all of My Tubes are one inch on all of My Hunting Rifles. I have never switched to 30mm.

 

[wolfmangreg]

Dug through the spare parts bin some more & eureka!

Sportsmatch dovetail for 1" tube, not sure if high or extra high - in between the two 30mm sets at 0.85" measured as the others.

Yours if you want 'em

 

[Chief 10-Beers]

I would sure try them! And if they don't work for Me, I will happily send them back to you! I know that Mine are not High rings at all.

 

[wolfmangreg]

PM me your address & it's done

 

[hameditor]

PM me your address & it's done

@wolfmangreg thanks for your outstanding support for another HAM Community member!!!!!

 

[wolfmangreg]

Turns out @Chief 10-Beers has an item he doesn't need & is sending to me, so it's now good old-fashioned horse trading

 

[Chief 10-Beers]

Count on It Wolf Man! Horse Trading has always been the most honest way. Both sides are happy!

 

[fderry]

When Pyramid sent My Condor SS They included a set of Rings, BKL 200 Series. They are way to short. I have to seriously tilt My head to get any kind of Eye relief. Any suggestions? Do I switch to Picatinny from Dove Tail, or maybe even go to a High "One piece High Mount? What do you recommend to fix this? I am already out $45 for this set, I just want to buy once and be done. I have not been able to find an 11mm to 11mm Riser that will allow Me to use the Same dove tail Rings that I already have. Let Me know what you other Airforce Shooters us. Thanks in advance!

You might want to think about a dovetail to dovetail riser. I have a Talon SS and have a riser added to it. I didn't add it for the rise but to stiffen the upper part of the chassis. There were quite a few posts years ago that said a riser helped stiffen the condor/talon chassis so I added one. I can't objectively say that it improved my chassis stiffness but it didn't hurt.

https://www.amazon.com/HWZ-Accessories-Tactical-Dovetail-Telescopic/dp/B076VKVKMS/ref=sr_1_5?crid=U0P8JOBVLS0O&dib=eyJ2IjoiMSJ9.LGkicGaPLosA5Vg6osDAB7D2IDwvcF1p274-IgYXXWIj1MIQNP01t5Uzjy0SFCDZK1pPWDXmREcO7bfs2xUOFilUJ9gHXvsVoalbMiQ_E10Ile-5d6UUiX1ONnfs6t2_LOrGoVxEYMxcKkeaTljDLDjhZZ7pUxx6V7lCkMfOLE8sy7HuToN4reRQnPw5ZgLL-Ukd_mkryuiZ2Emcne61DJt0B4MfVwQC5rVnfJGG0y_1Yyz51S3Z54_ByUKnbcWkQIszBSSWemNDUPgTODJeW0JAowudft6aSya52hhnYAk.nU3d59AQJStiuXWrEjVfyByA7_dTkgaFCxm-eSLcxLM&dib_tag=se&keywords=dovetail+to+dovetail+riser&qid=1748043852&sprefix=dovetail+to+dovetail+riser%2Caps%2C194&sr=8-5

 

[Chief 10-Beers]

Thank you for that! I never saw that option on any search even using the 11mm to 11mm Riser search. It always took Me to other sizes. The lady at BKL said they had one, but it was another $30 or so option. I saved this. Thanks again!

 

[Chief 10-Beers]

Thanks for this Knowledge. I never found it on My own. This Community is awesome!

 

[SpindleB]

Or use a angled drop adapter for your tank.
I have that and a low 11mm to 21mm adapter.

Airforce Gunpower Short Angled Tank Adapter for 400cc and 500cc Cylinders

Airforce Gunpower Short Angled Tank Adapter for 400cc and 500cc Cylinders - Available Options:Angled Tank Adapter:Airforce Angled Tank Adapter for 400cc and 500cc Cylinders (Short Version)Valve Assembly:Hi-Flow Valve with Assembly without Gauge and Fill N

trajectron.com

 

[SILENT SQUIRREL]

Count on It Wolf Man! Horse Trading has always been the most honest way. Both sides are happy!

How about the horse?
Is it happy too?

just mt too sense
Edward

 

[Chief 10-Beers]

Well, I got some stuff delivered and installed so maybe I will get to try it tomorrow . I went ahead and got a dovetail to picatinny adapter and added a set of adjustable height rings. The color actually looks really good! The eye relief is much better. Hopefully I can try and sight it in tomorrow.

 

[SpindleB]

Well, I got some stuff delivered and installed so maybe I will get to try it tomorrow . I went ahead and got a dovetail to picatinny adapter and added a set of adjustable height rings. The color actually looks really good! The eye relief is much better. Hopefully I can try and sight it in tomorrow.

I love those Westhunter adjustable rings. Have a couple of them and several sets of the fixed and cantilever. Red, blue, gold and brown. Black rings are boring...