250Z Am i the only one wondering?

[PestPlasteringPlinker]

Finding the correct weight Slug, has been a hassle. For a 22 cal, what slugs are being used and at approx what speed?

Yeah, im not sure about .22. NEB has the dial,as does pumacari. Slugs are more of a try try try try, dial in, restart, dial in, restart dial in.

Right now, im locked in on jsb 251 ko's from a fresh polish. 45 yards, 1/2 inch group of 12, with one flyer. Barrel isn't even leaded in with em, and my hammer spring is free floating with the slug kit in it. Absolutely zero tune what so ever.

I can promise that at 2550, maybe 2600 psi, they're no faster than maybe, a big maybe, 865. But I'll be bumping that to around 920, 930, and zero in on the hammer spring once I get there to see how low I can get the deviation.

Lowest deviation, highest accuracy. That's what im after. Ill find the perfect speed to minimize pass through, and maximize fpe fatality after those two are verified first.

 

[Pumacarl]

Finding the correct weight Slug, has been a hassle. For a 22 cal, what slugs are being used and at approx what speed?

I had a hard time too, mostly because I was really trying to find an NSA slug that would work. Even H&N were not that great. FX were borderline accurate and I thought for a while I would have to compromise with those.

Accurate is Zan .217 23gr 950fps or the JSB KO .216 20.83gr 980fps. Treniers, had the JSB KO's, last weekend when I checked. They have been hard to find. Don't worry about them being undersized for your bore either. They have a super thin and deep skirt on them that seals just fine. No flyers, no cleaning constantly, and they hold together out to 200y.

 

[Dogowski]

Im going balls out for the 61gn Zan and 60gn Altaros. I have access to 900 yards and if we shoot over a large pond 1400 yards. So should make for some great long range content this spring.

Guns ill be building and using for long range content

Texan 308
Texan 457
Barra 250z 25
Custom Airforce Condor 223
Skout 25 cal 28 inch barrel
Custom Airforce Condor 25 caliber slug barrel
Huben 25 k1

You've got a busy winter getting ready for springtime working on all these rifles man. It's great to watch a master at work!