I use a cheap flowgauge it's a no name that came with a cheap 110v mig welder the flow is set at 25cfhr that is the same as 13 litre's min the CS4 is rated to produce 11liters a minute
I feed my GX CS2 about 10 psi my GX CS4 gets fed 13 ltm aka 25 cuft hr the Tuxing twin gets 15psi
My most used is the CS4 so it gets the flowgauge. I have 3 Nitrogen tanks a 20cuft alum a 120 cuft
and a 150cuft my fills cost $20 bucks I mainly use the 120 swap it about 5 times a year...
Yep a 150 size bottle cost is about 200 bucks fills about cost around 20
You said you have mig tig those bottles can be exchanged for a nitrogen filled bottle and later if you need mix again swap the other way all you pay is the fill
Nitrogen is the cheapest gas for air separation plants to produce partly because it is the bulk of what air is comprised of. I go thru 5ea 120 cu ft bottles a year ie 600cu ft.
Your local welding supply store is going to be the best price and place to get nitrogen in bottles ranging for 20 cu ft...
I have only filled my guns with pure nitrogen since I got into PCP's about 5 years ago.
I regulate it down to the fill rate of the compressor ie 11lpm or 23cfh.
Because of this gas I have not had but one oring fail in the foster fitting of a beeman 2028
The reason NO oxidizers as nitrogen is...
The only issues I've had with the printer is getting it found on my network, I have it out in my shop so its remote print and not a strong wireless signal. So far the prints have been excellent.
I have a 1357 , 1358, and 13615 the last is regulated .177 and gives me about 80 shots @850 w/7.9gr cphp. Seems like pretty good bang for the less than 260 bucks
The Kobra S1 is here and printing have some ASA going right now reprinting the subscriber Plume for Air venturi avenger, the PLA+ that I did the original on the Vyper is doing fine but the ASA is supposed to be better for outdoor use, we shall see
I ordered the same setup its getting delivered thursday, seems like a big improvement over my Vyper.
You must have done the founders deal they did from jan 2 to the 12th
I have had an Anycubic Vyper for a couple of years gave it to my son and grandson, with the deal being make me stuff as needed. They are terrible at getting me stuff so, I might let them see my new S1 combo :>)