What did you buy/receive today?

[406 Rick]

I run one of these on my RovAir unit and it works really well…

Can I ask what you've got inline between the compressor and filter?

 

[PG1 Airgunner]

Can I ask what you've got inline between the compressor and filter?

It is an inline filter setup that came with the compressor unit. It has user replaceable media in it and I added a motion activated hours counter so I can keep track of the units run time.

 

[Grunt64]

I ordered some 125gr .358 slugs. I will size them to .356 and .357 to see what my gun likes the best.

good luck me friend, let me know how you make out please and what pcp?

 

[Zelos1]

I ordered some 125gr .358 slugs. I will size them to .356 and .357 to see what my gun likes the best.

What are you shooting them through?

 

[old navy]

got my air tank band from red corn just wanted to give a shoutout to Angel, you will not meet or deal with a nicer or more customer friendly merchant TY Angel

 

[PapaT]

got my air tank band from red corn just wanted to give a shoutout to Angel, you will not meet or deal with a nicer or more customer friendly merchant TY Angel

Yes. Angel is great, I had a lot of fun working with him for the first Gen tank bands. The new ones with probe holder are an awesome idea/design. I have 2 mags inbound from him for my Vanguard.

 

[Chief55]

What are you shooting them through?

Bulldog M357

 

[Soren Drost]

Ordered a new die set for .177 ELR slugs

 

[Solo1]

Ordered a new die set for .177 ELR slugs

View attachment 20339

Interested in how they shoot!

 

[Chief55]

Ordered some NSA 110gr .357 slugs for M357

 

[Madhatter]

Ordered up a scope leveling tool.

 

[Dago6504]

Received my regulator test/adjust tool for my AGT VULCAN3 .30 from Talon Tunes.

 

[Scriv]

Williams peep site for my Weihrauch HW50S.

 

[JohnnyS]

Bought a Daisy 220 - abt a 1970 .177 caliber springer ... made by Milbro in the U.K. and received in the USPS mail a replacement rear sight for a Crosman 761xl ...

 

[Chief55]

I received my 125gr .358 slugs today. I will put some in Lee liquid Alox overnight so I can resize some to .356 and .357 in the morning. These are just a little harder than pure lead at 6 BHN, these are a 20:1 mix at 10 BHN. Still soft enough to be able to scratch the bottom with my fingernail but a large flat meplat in the front. If I managed to shoot something hunting, my hope is that these can brake bone and give a full pass through. These are only 10cents each before shipping which is hard to beat for big bore ammo these days.

 

[JohnnyS]

Got a Slavia 612 ... (.177) ... shot it in a 25 shot string over an Athlon Rangecraft ... 315-330 fps without any work on it. It's needs are few. And, a sorta nasty Slavia 618 for parts ... and a Daisy Model 99 with sling to clean up, repair and "re-patriate" to another.

 

[JohnnyS]

I received my 125gr .358 slugs today. I will put some in Lee liquid Alox overnight so I can resize some to .356 and .357 in the morning. These are just a little harder than pure lead at 6 BHN, these are a 20:1 mix at 10 BHN. Still soft enough to be able to scratch the bottom with my fingernail but a large flat meplat in the front. If I managed to shoot something hunting, my hope is that these can brake bone and give a full pass through. These are only 10cents each before shipping which is hard to beat for big bore ammo these days.
View attachment 20385

to be shot out of ???

 

[Chief55]

Benjamin Bulldog M357

 

[Chief55]

Got a Slavia 612 ... (.177) ... shot it in a 25 shot string over an Athlon Rangecraft ... 315-330 fps without any work on it. It's needs are few. And, a sorta nasty Slavia 618 for parts ... and a Daisy Model 99 with sling to clean up, repair and "re-patriate" to another.

This is interesting, apparently, they were used as dart guns.

https://www.pyramydair.com/blog/2024/01/slavia-612-breakbarrel-airgun-part-one/

 

[Pumacarl]

This is interesting, apparently, they were used as dart guns.

https://www.pyramydair.com/blog/2024/01/slavia-612-breakbarrel-airgun-part-one/

That was interesting. I would stress out over working on something that old too. It's hard enough getting parts for a new gun, lol.