What did you buy/receive today?

[SpindleB]

I use my lap and end up crawling around on the floor looking for tools and parts. Because my workbench is covered in *stuff* and my gun vise can't be set down on the workbench either.

Maybe I should go clean it off...

 

[FL22]

The "parts organizer" section is a bit cheesy but other than that...sweet mat!

Yeah, I don’t know about the “organizer” just that they stated it’s an area of contrast to make it easier to see smaller parts like springs and such.

I’m happy that I no longer have worry about parts falling through the holes in my work bench, my wife bought it for me as a gift, so I made no complaints as she didn’t realize that it was designed for wood woodworking.

After all one of many, many keys to marital bliss is the fundamental understanding that it’s the thought or lack there of that counts .

 

[SpindleB]

I use my lap and end up crawling around on the floor looking for tools and parts. Because my workbench is covered in *stuff* and my gun vise can't be set down on the workbench either.

Maybe I should go clean it off...

Fine, yes, I cleaned it off.
*grumbles*

 

[Scriv]

Ordered a Weihrauch HW30N.

 

[Florida_Man]

I don’t think it is arriving today.

 

[Scriv]

Uh, a Weihrauch HW30S in grey laminate, .177 cal.

 

[Murfdurf82]

I received the baffle kit for my .25 Max 1. Installed it as I should and tested. More "metallic" or ping out of the front. Will need to get a moderator adapter as it's a bit too loud for the neighborhood. Not much info on it out there, the entire gun. Instructions are in French haha. Snowpeak website has no manual or spec sheet.

 

[Florida_Man]

I don’t think it is arriving today.

It appeared in Jacksonville. Unknown delivery day now

 

[SpindleB]

I received the baffle kit for my .25 Max 1. Installed it as I should and tested. More "metallic" or ping out of the front. Will need to get a moderator adapter as it's a bit too loud for the neighborhood. Not much info on it out there, the entire gun. Instructions are in French haha. Snowpeak website has no manual

What I used is the DonnyFl A83 adapter

DonnyFL AEA CHALLENGER .22, .25 & .30 ADAPTER, 24” BARREL MODELS (1/2X20 MALE THREADS) A83

M28x1.0 threads on the shroud. I used my 0db 160 moderator.

If you want I can do tests with my various other moderators
Reximex Silent Force Long
Silent Thunder Ordinance Falx
Heartland Airguns .25
DonnyFl Sumo (.30)
Airgun Capital 1/2-20

If I were to guess the Falx and 0db would be the quietest

 

[JimT66]

Finally broke down and did it. Decided to find out just how much better a .30 caliber is over a .25 on Coyotes. The new tracks around the outside of my chicken coop seemed to be all the push I needed, after wanting one since I first read about and seen the pictures of the Macavity Ma2 long. the regulated Condor gonna be hard to beat, other than just being single shot though.

 

[SpindleB]

Received an STO Falx big bore .357 moderator for my latest gunbroker win HM1000x .357. Had to print a m30x1.0 to M18x1.0 thread adapter.

 

[JimT66]

M

Received an STO Falx big bore .357 moderator for my latest gunbroker win HM1000x .357. Had to print a m30x1.0 to M18x1.0 thread adapter.

How are the printed adaptors holding up to the high pressure? Pretty good? I've had several printers tell me they won't do them, outta fear they might blow out, split, under the pressure.

 

[SpindleB]

M

How are the printed adaptors holding up to the high pressure? Pretty good? I've had several printers tell me they won't do them, outta fear they might blow out, split, under the pressure.

Just the adapter m30x1 to M18x1.

I did the printed moderators last year and was unimpressed. Not great sound reduction and fragile. I broke a couple just banging them against the window frame.

There was no issue with them holding up while shooting. But I print airgun stuff in PETG-CF filament which is much stronger than PLA or PETG filament

 

[Murfdurf82]

Just the adapter m30x1 to M18x1.

I did the printed moderators last year and was unimpressed. Not great sound reduction and fragile. I broke a couple just banging them against the window frame.

There was no issue with them holding up while shooting. But I print airgun stuff in PETG-CF filament which is much stronger than PLA or PETG filament

I have a standard 25/30 buckrail but I've been looking around. I have a emperor/ronin extension(no moderator )felt and screen. Im going to have an outlet tip made and just need to get some curlers for the felt and screen. I've reached my budget for a while lol.

 

[PapaT]

Just ordered 5 additional magazines/clips for my Crosman M4-177.

Wanted to order ammo from Hatsan with their "free shipping weekend", but their code is saying it is expired. My desire to pay the shipping is also expired, so we are at a standstill.

 

[JimT66]

Just ordered 5 additional magazines/clips for my Crosman M4-177.

Wanted to order ammo from Hatsan with their "free shipping weekend", but their code is saying it is expired. My desire to pay the shipping is also expired, so we are at a standstill.

I tried it as well. Said sale was good until Feb.2, but it was determined I was gonna pay shipping, I was determined I was not. So I ordered 30 cal pellets from Field Supply.

 

[Billm]

M

How are the printed adaptors holding up to the high pressure? Pretty good? I've had several printers tell me they won't do them, outta fear they might blow out, split, under the pressure.

I’ve had a 3d printed adapter/air stripper on my Beeman underlever for almost 1.5 years with no issues. I tried several on my TalonP made from heavy duty composite materials, they all failed. I broke down and purchased a DonnyFL adapter and it was the right choice. I removed a 3d printed one from my Alpha the other day and went back to the stock moderator. I do a lot of 3d printing, some things should not be printed. You risk catastrophic failure and at the very least baffle strikes. I had several spectacular departures from the end of my TalonP. I use 3d printed moderators all the time. I keep four printers busy.

 

[PapaT]

I tried it as well. Said sale was good until Feb.2, but it was determined I was gonna pay shipping, I was determined I was not. So I ordered 30 cal pellets from Field Supply.

I don't NEED any right now, so I can wait until they get their act together. I just like their H&N prices best, and my 362 likes the Baracuda 15s, the M4-177 likes the FTT

 

[Scriv]

A Hawke air max 2-7x32 AO scope. Seems like it will be right for my HW30N in .20

 

[SpindleB]

Labradar
Now that I have a scope that does LRF and Ballistic Coefficients I guess I need to calculate my various BC.
Luckily Optics Planet has them 55% off.
Since I'm flushing money just grab another handful.