Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Others Murph said,"if can happen it will happen"

ernroe

HAM Sniper
266
951
Columbia, SC USA
HAM Points
1,414.75
Country flag
I have only been fondling Airguns for about 2 years and have a lot to learn and have learned a lot. The forums and its members have been very helpful.I am active on two, one on each side of the Atlantic.
Murphy's Law states that, "if can happen it will happen" and having been on this earth for 79 years I can, based on experience, agree with Murphy. Below is my latest expample and is related to air gunning. This took place a few weeks ago and I have hesitated posting because of its implausibility. It is kind of like a Fishing story or Turkey hunting story. It sounds exaggerated or made up.

I have a back yard range and usually shoot from just inside the my garage side door. My 1st target is 30 yds downrange. On this day I was sighting in a Red Dot sight on my HW50S. I had no idea where it would shoot so I leaned a 1"thick laminated board against a tree 20 yds away so I would have a better idea of where it was hitting.I have used this board a lot but futher downrange. It is a shelving board from a storage cabinet, It consist of pressed board and is covered on each side by finished laminate.I used a reflective target. The first shot hit the target about 2 inches low and right.I heard the pellet hit the wood but then heard something that sounded like it hit metal behind me. Now, I have Meneier's disease and can only hear out of my left ear so I was not quite sure what or where that metal on metal sound came from. I made an elevation adjustment on the sight and shot at the target again.The pellet move up but again I heard wood and then metal on metal behind me. There was a metal cabinet about 5 yards behind me so I decided take a look and sure enough there laying on the floor were 2 crushed .22 pellets. It scared the hell out of me because those pellets had to have passed a minimum of 2 feet from head. After regaining composure and cleaning up I put a new target on a piece of drywall and moved it downrange to 30 yds and completed sighting in the red dot sight. I have photos below.
 

Attachments

  • HW50.webp
    HW50.webp
    268.1 KB · Views: 6
  • Target Frt.webp
    Target Frt.webp
    254.7 KB · Views: 6
  • Target edge.webp
    Target edge.webp
    339.5 KB · Views: 7
  • Cabinet.webp
    Cabinet.webp
    376.3 KB · Views: 7
  • Pellet A.webp
    Pellet A.webp
    131.5 KB · Views: 7
  • Pellet B.webp
    Pellet B.webp
    85.4 KB · Views: 7
I have only been fondling Airguns for about 2 years and have a lot to learn and have learned a lot. The forums and its members have been very helpful.I am active on two, one on each side of the Atlantic.
Murphy's Law states that, "if can happen it will happen" and having been on this earth for 79 years I can, based on experience, agree with Murphy. Below is my latest expample and is related to air gunning. This took place a few weeks ago and I have hesitated posting because of its implausibility. It is kind of like a Fishing story or Turkey hunting story. It sounds exaggerated or made up.

I have a back yard range and usually shoot from just inside the my garage side door. My 1st target is 30 yds downrange. On this day I was sighting in a Red Dot sight on my HW50S. I had no idea where it would shoot so I leaned a 1"thick laminated board against a tree 20 yds away so I would have a better idea of where it was hitting.I have used this board a lot but futher downrange. It is a shelving board from a storage cabinet, It consist of pressed board and is covered on each side by finished laminate.I used a reflective target. The first shot hit the target about 2 inches low and right.I heard the pellet hit the wood but then heard something that sounded like it hit metal behind me. Now, I have Meneier's disease and can only hear out of my left ear so I was not quite sure what or where that metal on metal sound came from. I made an elevation adjustment on the sight and shot at the target again.The pellet move up but again I heard wood and then metal on metal behind me. There was a metal cabinet about 5 yards behind me so I decided take a look and sure enough there laying on the floor were 2 crushed .22 pellets. It scared the hell out of me because those pellets had to have passed a minimum of 2 feet from head. After regaining composure and cleaning up I put a new target on a piece of drywall and moved it downrange to 30 yds and completed sighting in the red dot sight. I have photos below.
I'll bet you were using crosman's or another harder pellet. I had a similar experience with H&N copper-plated Barracuda pellets. They bounced off my plywood back stop and one hit me in the belt buckle! That was before I discovered the rubber mulch pellet trap. Now I have a platic tote filled with rubber mulch, with a hole cut out of the lid. The lit holds a pieces of corrugated cardboard in place and I tape my targets to the cardboard. No ricochets, and it's super quiet.
 

Attachments

  • 17454441628057320840763522810672.webp
    17454441628057320840763522810672.webp
    138.9 KB · Views: 1
I'll bet you were using crosman's or another harder pellet. I had a similar experience with H&N copper-plated Barracuda pellets. They bounced off my plywood back stop and one hit me in the belt buckle! That was before I discovered the rubber mulch pellet trap. Now I have a platic tote filled with rubber mulch, with a hole cut out of the lid. The lit holds a pieces of corrugated cardboard in place and I tape my targets to the cardboard. No ricochets, and it's super quiet.
I was using Crosman, lol
 
I'll bet you were using crosman's or another harder pellet. I had a similar experience with H&N copper-plated Barracuda pellets. They bounced off my plywood back stop and one hit me in the belt buckle! That was before I discovered the rubber mulch pellet trap. Now I have a platic tote filled with rubber mulch, with a hole cut out of the lid. The lit holds a pieces of corrugated cardboard in place and I tape my targets to the cardboard. No ricochets, and it's super quiet.
I love rubber mulch trap life!
 
I have only been fondling Airguns for about 2 years and have a lot to learn and have learned a lot. The forums and its members have been very helpful.I am active on two, one on each side of the Atlantic.
Murphy's Law states that, "if can happen it will happen" and having been on this earth for 79 years I can, based on experience, agree with Murphy. Below is my latest expample and is related to air gunning. This took place a few weeks ago and I have hesitated posting because of its implausibility. It is kind of like a Fishing story or Turkey hunting story. It sounds exaggerated or made up.

I have a back yard range and usually shoot from just inside the my garage side door. My 1st target is 30 yds downrange. On this day I was sighting in a Red Dot sight on my HW50S. I had no idea where it would shoot so I leaned a 1"thick laminated board against a tree 20 yds away so I would have a better idea of where it was hitting.I have used this board a lot but futher downrange. It is a shelving board from a storage cabinet, It consist of pressed board and is covered on each side by finished laminate.I used a reflective target. The first shot hit the target about 2 inches low and right.I heard the pellet hit the wood but then heard something that sounded like it hit metal behind me. Now, I have Meneier's disease and can only hear out of my left ear so I was not quite sure what or where that metal on metal sound came from. I made an elevation adjustment on the sight and shot at the target again.The pellet move up but again I heard wood and then metal on metal behind me. There was a metal cabinet about 5 yards behind me so I decided take a look and sure enough there laying on the floor were 2 crushed .22 pellets. It scared the hell out of me because those pellets had to have passed a minimum of 2 feet from head. After regaining composure and cleaning up I put a new target on a piece of drywall and moved it downrange to 30 yds and completed sighting in the red dot sight. I have photos below.
My dad got a bunch of plywood that is made in China and comes pre-painted (Like Canada needs to import plywood🙄) and it's hard as a rock...shooting the Slavia (550fps-ish) often produces ricochets! I got a bunch of the leftovers and some is on my pellet trap. Needless to say when I shot the Ham 10Y challenge I used safety glasses. It was slightly terrifying. If shooting plywood with weaker airguns close range, I recommend half inch max and just the cheap construction grade stuff. Oh and this Chinese plywood? There is gravel inbedded in it, I kid you not. Keeps life interesting 😵‍💫
 

Attachments

  • 20240330_170607.webp
    20240330_170607.webp
    72.7 KB · Views: 2

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top