Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Spring/Piston BSA Meteor EVO GRT - a fox in sheep's clothing

Kragman1

HAM Sniper
447
1,173
Country flag
Last edited:
Just today I recieved a used BSA Meteor EVO in 22. I was very dubious about any of the Gamo owned "BSA" rifles, but also ery curious. I know that they are very light in weight (this one is advertised as 6.2 lbs) and should be very nice to carry in the field even after mounting a scope.
This one came to me in perfect condition and inexpensively. They are sleek but traditional looking, which I approve of.
With a surprisingly high energy output of 17.3 fpe, and a promising accuracy sample from the seller, I had high hopes that I had found a diamond in the rough.

20241109_184528.jpg

I had just a little time tonight to check it out, and I hope to have more soon.
But I did get a nice little chrony sampling in, and 1 quick group.
My first impressions:

1. The rifle is generally nice. I like the stock, the cocking effort is modest, the trigger is OK (and can be a lot better I think), the firing cycle is excellent and the rifle really seems to want to shoot. Also, all 4 pellets that I tried tonight fit the bore well.

2. It's got a plastic breech block and trigger. The lockup is by a steel chisel to a pin and should be fine, but whatever material
the block is made from "muffles" the lockup sensation and it feels dull or neutral. It seems like nylon, but could even be cast because its cool to the touch.
Once in battery, the lockup seems fine, but it doesn't give you any tactile feedback when you are returning the rifle to battery and makes an otherwise nice rifle feel like a toy.

3. But it is NOT a toy, and the chrony numbers really surprised me, as all were greater than the 17-18 fpe I was expecting:

11.9 RWS Hobby - 861.1 avg / 19.60 fpe
14.0 RWS M'kugeln - 819 avg / 20.85 fpe
15.9 JSB Exact - 729.2 avg / 18.77 fpe
18.0 H&N Baracuda - 691.1 avg / 19.08 fpe

That isn't far off from the 21-22 fpe of my SIG ASP20 in .22 and definitely sets a record for power to weight ratio in my assortment of springers. Its even lighter than my RWS 94 which runs around 17-18 fpe. This should be a bumpy, jumpy rifle but it's not. Amazingly.
I'm excited to see how it likes H&N FTT's. They often shoot faster than the Meisterkugeln even though they are a little heavier. And you all know how accurate they are.

4. The shot cycle is excellent. I have a couple of other gas rams, and this one has the best cycle. Other makers should be envious. It's a fast, strong push that just stops, with no real thud to jostle the gun at the end. Nice. Really nice. I don't understand how such a light gun doesn't jolt forward at the end of the piston travel. I'm assuming a very light piston figures in.

5. The trigger needs help, like a Charlie Da Tuna upgrade. But it's much better than other Gamo triggers I've been around. It mostly suffers from a springy, vague feel to the all important 2nd stage, which is simply too long. And some of that is coming from the flexible plastic trigger blade as well.

Does anyone know which CDT unit is the right one for this trigger:

20241109_192216.jpg

6. Accuracy sure seems good! This is where I thought things could fall apart, especially involving elevation, since I can't feel what the lockup is doing and I worried about vertical stringing.
I had time for a rushed 5 shot group of RWS Meisterkugeln, which made a little round group no wider than 2 pellets. I'm sure that I can improve that too.

I threw a light Nikon Monarch 2-7x32 on the rifle just for tonight. It's a great scope but not the best for testing at 9 yards because there is no AO.
I'll probably be looking for a 3-9x32 AO scope for this, with a decent reticle. I'm definitely going to keep this one light.
 
Just today I recieved a used BSA Meteor EVO in 22. I was very dubious about any of the Gamo owned "BSA" rifles, but also ery curious. I know that they are very light in weight (this one is advertised as 6.2 lbs) and should be very nice to carry in the field even after mounting a scope.
This one came to me in perfect condition and inexpensively. They are sleek but traditional looking, which I approve of.
With a surprisingly high energy output of 17.3 fpe, and a promising accuracy sample from the seller, I had high hopes that I had found a diamond in the rough.

View attachment 9488

I had just a little time tonight to check it out, and I hope to have more soon.
But I did get a nice little chrony sampling in, and 1 quick group.
My first impressions:

1. The rifle is generally nice. I like the stock, the cocking effort is modest, the trigger is OK (and can be a lot better I think), the firing cycle is excellent and the rifle really seems to want to shoot. Also, all 4 pellets that I tried tonight fit the bore well.

2. It's got a plastic breech block and trigger. The lockup is by a steel chisel to a pin and should be fine, but whatever material (seems like nylon, could even be cast because its cool to the touch) the block is made from "muffles" the lockup sensation and it feels dull or neutral. Once in battery, the lockup seems fine, but it doesn't give you any real feedback when you are returning the rifle to battery and makes an otherwise nice rifle feel like a toy.

3. But it is NOT a toy, and the chrony numbers really surprised me, as all were greater than the 17-18 fpe I was expecting:

11.9 RWS Hobby - 861.1 avg / 19.60 fpe
14.0 RWS M'kugeln - 819 avg / 20.85 fpe
15.9 JSB Exact - 729.2 avg / 18.77 fpe
18.0 H&N Baracuda - 691.1 avg / 19.08 fpe

That isn't far off from the 21-22 fpe of my SIG ASP20 in .22 and definitely sets a record for power to weight ratio in my assortment of springers. Its even lighter than my RWS 94 which runs around 17-18 fpe. This should be a bumpy, jumpy rifle but it's not. Amazingly.
Very excited to see how it likes H&H FTT's. They often shoot faster than the Meisterkugeln even though they are a little heavier. And you all know how accurate they are.

4. The shot cycle is excellent. I have a couple of other gas rams, this one has the best cycle. Other makers should be envious. It's a fast, strong push that just stops, with no real thud to jostle the gun at the end. Nice. Really nice.

5. The trigger needs help, like a Charlie Da Tuna upgrade. But it's much better than other Gamo triggers I've been around. It mostly suffers from a springy, vague feel to the all important 2nd stage, which is simply too long. And some of that is coming from the flexible plastic trigger blade as well.

Does anyone know which CDT unit is the right one for this trigger:

View attachment 9489

6. Accuracy sure seems good! This is where I thought things could fall apart, especially involving elevation, since I can't feel what the lockup is doing and I worried about vertical stringing.
I had time for a rushed 5 shot group of RWS Meisterkugeln, which made a little round group no wider than 2 pellets. I'm sure that I can improve that too.

I threw a light Nikon Monarch 2-7x32 on the rifle just for tonight. It's a great scope but not the best for testing at 9 yards because there is no AO.
I'll probably be looking for a 3-9x32 AO scope for this, with a decent reticle. I'm definitely going to keep this one light.
Cool rifle! Post some pics of your groups please. Like to see how she shoots.
 
If me my main test would be the ram .

Because ng this time of year I'd zero it at 50y in the hottest point of the day say 80°

The get it out early am when it's the coolest part of the day like 60° or less

And see your point change .

Here's a example of a gamo igt ( I got took) ram gun
gamoigttemppoi.jpg

Igt supposed to mean inert gas technology ( like nitrogen) , but according to gamo its just plain ol air used to fill them .. lol
 
A guy at GTA forum got the same answer from gamo on the " inert gas" used .. plain old air .. so he verified me as I did him on that .. I thought funny how someone else inquired on it as I did ..

But now if it's at zeroed temps or climate control building ,/ room . It's deadly on . Near one hole deadly .
 
So, I spent more time with this rifle this morning, and it turns out that the velocity numbers weren't a dream - I tried a few more, and they all held up. The limit seems to be the 18 grain pellets though, as energy dropped noticeably with 21 grain Baracudas.

14.66 H&N FTT 5.53 too tight, try 5.52's next time, or smaller
777.9
781.8
787.1
782.3 avg / 19.92 fpe

14.2 RWS Super H Point nice fit
776.5
777.2
778.8
777.5 avg / 18.96

14.5 RWS Superdome
804.8
797.2
799.8
800.6 avg / 20.6 fpe

RWS Super Field 15.9. 5.52 (seem like 5.51)
766.5
769.2
773.3
769.7 avg / 20.9 fpe

H&N Baracuda Match 21.14 5.51. (OK fit, but still felt tight)
581.8
595.1
586.7
587.9 avg / 16.2 fpe

The ones that really caught my eye were the RWS Superfield 15.9's at 770 fps. They are a quality domed pellet, and my ASP20 thinks they're springer candy. I hope the BSA thinks so too. (and I wish I knew what their BC was, in comparison to the excellent JSB 15.9's)

The shot cycle is still sweet and the recoil much less than it has a right to be, in my opinion. I'm still adjusting my brainwaves to that frequency lol.

The trigger pull is still too long but at least it is smooth, which is why I will get a GRT blade installed, not because of weight. The pull weight is fine.

Here's the sole group I shot last night.
And I was wrong - there is a bit more than 1 pellet space between them. I'll be sure to shoot some Miesterkugeln more seriously today!

Screenshot_20241110_101251_Gallery.webp


So, I'm not sure which pellets I'll shoot, but I'll get another update in as soon as I do. I have some errands to run now.
 
Well, I told myself that the errands can wait a bit, and spent a little time downstairs with the BSA and a good cup of coffee.

I've been a little suspicious of the chisel and the way closing the barrel feels. Yep, I was wrong - the chisel looks good but its plastic, not steel. The working edges are sharp and clean, showing no signs of being insufficient to the job. But I'd really like one made out of steel, so I may ask a friend to make me one out of stainless. That may end up being a great little upgrade.

As to the trigger, it feels fine in casual shooting. But even though it's smooth, it's too heavy for target shooting (and looonnng - don't forget long! ha ha!).
In combination with the very muzzle light nature of the rifle, the trigger made it difficult to keep the rifle steady through the shot. I believe that every group would be improved by upgrading the trigger.

It's also odd that the steel barrel has a deep, 9/16" diameter relief at the muzzle end. Expansion chamber? If so, why? I have no idea.

So what do we really have in the
BSA Meteor EVO GTR?

I like it. Didn't know if I would, but I do.
From the outside we have a rare featherweight springer with good quality bluing, a very nice traditional wood stock (thanks Minelli!), that has a remarkably smooth yet powerful shot cycle. It's more than accurate enough to be a standout hunting rifle. It does seem to be somewhat hold sensitive. Time will tell.
In my admittedly purist opinion, the synthetic pivot block gives the rifle a black eye, BUT even that has a silver lining: it does save a chunk of weight, and cost, and it doesn't do much besides hold other stuff in place. The plastic chisel makes the lockup feel like trash though. There's no silver lining to that.

Most people can upgrade the trigger easily enough. Most won't be able to upgrade the locking chisel unless they have access to some machinery. I'm not sure that there are any other aspects that I would call negative. That said, the inner works are sure to be subject to cost efficiency. Hopefully, none of it is a showstopper.

OK - to the groups...
Spoiler - it really likes Meisterkugeln!

Screenshot_20241110_125236_Gallery.webpScreenshot_20241110_125122_Gallery.webpScreenshot_20241110_114634.webp
 
I guess it's tough stuff

But even my steel chisel in the hw is rounding . But the gamo it's the hole the chisel fits in to gets a little loose as time goes by . Gamo holdings stuff ain't heirloom so user life upkeep not priority.

Hw one wares too much you can get new chisel and spring and keep on rocking it ..
 
Last edited:
A sad one to report -

Because the velocities were so consistent and there was no other sign of dieseling, I felt pretty good about what I was getting via the chrony. But, I still felt that I should corroborate after more shooting, so I shot it.next to a known quantity Hatsan 95. Well, my velocities have come down some, and I don't know where they'll settle. See below.
FYI, the Hatsan shot at the expected power level. No need to replace my chronograph!

That said, it was a good exercise! Despite the extra weight of the Hatsan 95, it has a rougher firing cycle. Cocking effort is similar, but the BSA is nearly as smooth as an HW while the Hatsan "gets it done". The Quattro trigger is much more shootable than the BSA, though I'm happy to upgrade.
One last quick observation - while I don't care.for the soft, padded feel of the BSA lockup, it would probably be a welcome relief for people who've had enough of slamming springers shut to last them a lifetime.... 😁

Numbers:
BSA, after some target shooting:
Meisterkugeln 14.0
792.3
795.1
820.7

also JSB 15.9's
720.5
730.8
723.7
725.0 avg / 18.55 fpe

JSB 15.9 in my Hatsan 95 (coil)
728.2
736.6
731.4
732 avg / 18.91 fpe
 
For anyone interested in this very light springer, I am trying to sort out a suitable scope for it. Light, decent magnification, and some sort of graduated reticle.

If you have any suggestions, fire away!

Thanks all
 
So, I spent more time with this rifle this morning, and it turns out that the velocity numbers weren't a dream - I tried a few more, and they all held up. The limit seems to be the 18 grain pellets though, as energy dropped noticeably with 21 grain Baracudas.

14.66 H&N FTT 5.53 too tight, try 5.52's next time, or smaller
777.9
781.8
787.1
782.3 avg / 19.92 fpe

14.2 RWS Super H Point nice fit
776.5
777.2
778.8
777.5 avg / 18.96

14.5 RWS Superdome
804.8
797.2
799.8
800.6 avg / 20.6 fpe

RWS Super Field 15.9. 5.52 (seem like 5.51)
766.5
769.2
773.3
769.7 avg / 20.9 fpe

H&N Baracuda Match 21.14 5.51. (OK fit, but still felt tight)
581.8
595.1
586.7
587.9 avg / 16.2 fpe

The ones that really caught my eye were the RWS Superfield 15.9's at 770 fps. They are a quality domed pellet, and my ASP20 thinks they're springer candy. I hope the BSA thinks so too. (and I wish I knew what their BC was, in comparison to the excellent JSB 15.9's)

The shot cycle is still sweet and the recoil much less than it has a right to be, in my opinion. I'm still adjusting my brainwaves to that frequency lol.

The trigger pull is still too long but at least it is smooth, which is why I will get a GRT blade installed, not because of weight. The pull weight is fine.

Here's the sole group I shot last night.
And I was wrong - there is a bit more than 1 pellet space between them. I'll be sure to shoot some Miesterkugeln more seriously today!

View attachment 9499


So, I'm not sure which pellets I'll shoot, but I'll get another update in as soon as I do. I have some errands to run now.
Sweet group with this bad boy! Very nice.
 
It really needs a CDT trigger upgrade, and possibly a steel chisel to (maybe) give me a sense of feel when I close the action.

Other than that, I think there is plenty to like.
I would welcome a "deluxe" version - steel breech block and chisel, sights(!), and a factory adjustable trigger. Can't imagine one will ever exist, but I can upgrade everything but the breech block.

Now to find a nice, lightweight scope for it.
 
Hey Kragman,
I like my BSA Meteor Super in .22 also. I put a Hawke 2-7X X 32 Vantage scope on mine and I'm happy with that. I have not modded the trigger, but I should.
 
OK all - I had the brief chance to shoot this rifle out to 100. Before the wind went from a touch breezy to a lot breezy, I was torturing a small rock at the base of the 100 yard berm. I'm guessing the rock was around 2". I should have picked it up and taken it with me, but I didn't think to. Doh!
Holdover was coincident with the top of the full width portion of the bottom post of my reticle @ 14X using Baracuda 18's, and once I saw that I didn't miss a shot. Shooting between the breezes of course. I finally decided to put up paper at 100, but the wind had picked up enough that there were no longer any dead spots, and my 100 yard "group" clearly showed it. Looks like it's about 8" or so wide with less vertical dispersion.

Then between scope slippage (aaargh!!) and PITA winds I punked around at 25 then put the rifle away. This over-plasticed rifle (basically a box store gun) which has an intended design that flies in the face of HW and Diana is performing very, very well.
And that's with the long & somewhat unpredictable trigger, which I hope to upgrade soon.
As a Diana & HW lover, it's kinda hard for me to accept. Then again, I paid $109 shipped for the rifle, another $43 shipped for the 4.5-14 mil-dot and $16 for the BKL rings that I'm about to swap onto it. That is NOT hard for me to accept! Add in roughly $35 for the GRT-4G trigger, and this combination will stand me $200 or so, while providing performance well beyond what I expect at that price point.

Looks good too 😁:

20250314_145655.jpg



FYI, the wind situation is weird at my range, which is at the bottom of a natural bowl - most of the 100 range has some wind break along the sides, but there's no wind break near the firing line, and of course, a cross wind there has the most impact on drift. Plus, as wind follows the bowl shape downward it has a definite effect on elevation. I can certainly see the effects when shooting airguns there. But on decent days (usually mid-day) it is a great place to shoot.
 
If me my main test would be the ram .

Because ng this time of year I'd zero it at 50y in the hottest point of the day say 80°

The get it out early am when it's the coolest part of the day like 60° or less

And see your point change .

Here's a example of a gamo igt ( I got took) ram gun
View attachment 9494

Igt supposed to mean inert gas technology ( like nitrogen) , but according to gamo its just plain ol air used to fill them .. lol
IGT LOL glad someone gave me my gamo
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top