Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Chrono usage, hope I got it right.

Dadwag

HAM Sharp Shooter
133
576
Bellevue,Ohio
Country flag
Last week I put a new seal and a new nitro piston 1 in my good ol’ Crosman Nitro Venom .22. Well after the work I chronoed and found a 125 fps gain from 550 to 675 avg. with cphp 14.3. Not bad I guess but I wanted more. I was shooting at a downward angle through my pro chrono. I thought it over and re-chronoed today but I shot on an even plane with the sensors. Now I average 750 fps a gain of 200 now which is more satisfactory. I suppose I’ve been using it wrong all along. Does angle matter that much? I guess it must🤔
 
So you then went back to shooting downward immediately after level and it was back to the lower speeds ..,

I've never replaced a sealed ram like crosman or gamo. So maybe after the first initial shots it was a break in or something that helped or the new deal just wore in and settled over night ..

Anyway should of checked the crony position right away of realization of difference.
 
No telling. I'd a thought as long as the pellet crossed the diodes and read the same results should occur. Then what do I know ..lol

I'd also go for the new stuff settled in and just clicking better. Like a break in period.

Ya anyway you'd need to do it both the ways to see what's up . Could of been one of them crazy things that happen out of the blue .. you know that scratch head , shrug shoulders and move on ..😅
 
Last week I put a new seal and a new nitro piston 1 in my good ol’ Crosman Nitro Venom .22. Well after the work I chronoed and found a 125 fps gain from 550 to 675 avg. with cphp 14.3. Not bad I guess but I wanted more. I was shooting at a downward angle through my pro chrono. I thought it over and re-chronoed today but I shot on an even plane with the sensors. Now I average 750 fps a gain of 200 now which is more satisfactory. I suppose I’ve been using it wrong all along. Does angle matter that much? I guess it must🤔
How many shots did you chrony? There might be a considerable weight grain difference in the cphp pellets also.
 
Last edited:
No telling. I'd a thought as long as the pellet crossed the diodes and read the same results should occur. Then what do I know ..lol

I'd also go for the new stuff settled in and just clicking better. Like a break in period.

Ya anyway you'd need to do it both the ways to see what's up . Could of been one of them crazy things that happen out of the blue .. you know that scratch head , shrug shoulders and move on ..😅
Wellll, I shot through the chronological both ways. Angled and straight through. Only about a 9 fps average difference less angled. With the difference in pellet weights in consideration, I feel pretty sure there isn’t any difference. Scratch and shrug time I guess👍😉
 
I got some for my B day this summer,I finally used them and they are quite more consistent. Thanks for the suggestion.
Did you by chance get any dieseling maybe on some shots? I redid my old Slavia .177 spring gun and it is not at all to my liking now. I want to try and get it right eventually...anyways I had went with what was supposed to be the stock full power spring and it's definitely too much spring for not alot more power ( I gained 50fps with light pellets😮‍💨) Now once in a while I will get a crazy fast reading (100-200fps more) on it maybe 1 in 10shots, pretty sure it diesels with that new lube I got with the spring from Vortek, and the barrel smokes after the shots. I know it's not the chrono...my 3 British guns all shoot super consistent and never really get any out of the ordinary speeds. Definitely the straighter you can align the gun to the 2 chrono sensors the better👍
 
Did you by chance get any dieseling maybe on some shots? I redid my old Slavia .177 spring gun and it is not at all to my liking now. I want to try and get it right eventually...anyways I had went with what was supposed to be the stock full power spring and it's definitely too much spring for not alot more power ( I gained 50fps with light pellets😮‍💨) Now once in a while I will get a crazy fast reading (100-200fps more) on it maybe 1 in 10shots, pretty sure it diesels with that new lube I got with the spring from Vortek, and the barrel smokes after the shots. I know it's not the chrono...my 3 British guns all shoot super consistent and never really get any out of the ordinary speeds. Definitely the straighter you can align the gun to the 2 chrono sensors the better👍
I did experience some dieseling I think. First readings w ere crazy fast 800+. It has settled down to the 690-700 range most of the time. I don’t know if my form is struggling to be consistent or I may be getting some inconsistent pressures. Too many fliers, I used to not have any problem with CPHP’s but I am having some problems. I did just get over a cold so this old beat up 71 year old body might just be getting back to form. As Hateful says, some times scratch head and shrug🤣
 
Thanks for all the replies you all. It seems all is well with me and my Venom now. We had to get used to each other after the “surgery”. One thing I found was it likes the artillery hold on a sand bag. A rolled up towel on a bench doesn’t work anymore. Yesterday I had it dialed in real good, very accurate. Today the was a good breeze on my 35 yd. range. I didn’t want to mess with my scope so I just used “ windage”. It all went well so I’m pretty sure my friend is healthy again. Such a relief. Next week I’ll rechrony to see how it settled in. Stay well all👍😉
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top