PCP Raw hm1000x power plenum build

[Northeastbeast]

If you didn't know @adaptivetuningsystem aka Aaron Hipp makes a Power plenum for the Raw Hm1000x. I am now building a 22 caliber. This plenum is an absolute must if you plan to shoot slugs. The winner for this set up seems to be .217 H&N 25 & 30 grain HP slugs. With a bit of tuning, you can get them to speeds needed for accuracy out to 200 yards. As parts come in, i will update with pictures and videos. Thanks Aaron this plenum is out of this world good.

If you dont know Aaron he is a top prs shooter in the firearms world. He took second at Rmac last year in Prs after his rifle was knocked off rack by another shooter. He probably would have taking first.

Second picture is for reference of what the rifle will look like with the plenum on. Mpa chassis system and ATS tuner.

 

[Woogie_man]

Where can I get one....Can't find it on his site.

 

[Northeastbeast]

Where can I get one....Can't find it on his site.

Will be up on his site tomorrow, or use contact info on card in picture to reach out.

 

[Woogie_man]

He sent me an email today saying the same.

Hoping to grab one to see what happens with the slugs. Hoping the addition will allow the use of heavier slugs.

 

[Northeastbeast]

He sent me an email today saying the same.

Hoping to grab one to see what happens with the slugs. Hoping the addition will allow the use of heavier slugs.

RAW HM1000X Power Plenum

Use the ATS Power Plenum to increase the velocity and power of your RAW HM1000x. Threads directly into your Raw receiver inline between your existing regulator. Our experience has shown this plenum allows speeds up to 1015fps with a 175bar reg and 25gn slugs, and up to 920 using 30gn slugs...

www.kineticsecuritysolutions.com

 

[Woogie_man]

Just ordered one. Would love to see more power and more consistency.

If I can possibly sell my Anschutz 8002 I am either grabbing another rifle or paying for the corbin press.

 

[Northeastbeast]

Just ordered one. Would love to see more power and more consistency.

If I can possibly sell my Anschutz 8002 I am either grabbing another rifle or paying for the corbin press.

Nice, i cant wait to get all the parts to my build

 

[EMACK1984]

If you didn't know @adaptivetuningsystem aka Aaron Hipp makes a Power plenum for the Raw Hm1000x. I am now building a 22 caliber. This plenum is an absolute must if you plan to shoot slugs. The winner for this set up seems to be .217 H&N 25 & 30 grain HP slugs. With a bit of tuning, you can get them to speeds needed for accuracy out to 200 yards. As parts come in, i will update with pictures and videos. Thanks Aaron this plenum is out of this world good.

If you dont know Aaron he is a top prs shooter in the firearms world. He took second at Rmac last year in Prs after his rifle was knocked off rack by another shooter. He probably would have taking first.

Second picture is for reference of what the rifle will look like with the plenum on. Mpa chassis system and ATS tuner.

Is it possible to shoot 23 - 27 grain slugs out to 100 yards with extreme accuracy with a stock build? I know you would have to up the regulator and adjust hammer spring, I just mean stock as in no modafied parts or added external plenum.

 

[Woogie_man]

You should be able to. I don't think there is anything special in my rifle. Just Martin's special tuning

This was 50 yards, and at 100 yards it is a little larger.

 

[Northeastbeast]

Is it possible to shoot 23 - 27 grain slugs out to 100 yards with extreme accuracy with a stock build? I know you would have to up the regulator and adjust hammer spring, I just mean stock as in no modafied parts or added external plenum.

I dont believe you would have enough plenum space to push slugs fast enough

 

[Woogie_man]

Plenum just showed up at the house. Will install Sunday, being as I have a match that day i don't want to mess something up.

 

[Woogie_man]

I am now pushing the 30 grain slugs at 970 fps....with a standard deviation of 4.0. So not to bad, though wish I knew that before I shot a match.. lol

 

[Mubhaur]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies