Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Marauder G3, The Things I Do For Fun

I have been trying to find info from anybody shooting slugs in their .25 G3 and it is scarce. So... I have just been looking at the options and today I ordered some of the .250 38gr Heavy Slugs from H&N. These are the lightest in their new heavy line, which I want to try because it uses a new softer lead. I will try to get them to 950fps and see what happens. I don't believe that I could get much heavier slugs to do 950fps, so I am topping out at 38gr for now. I know some slugs shoot more accurate going slower and I hope that's not these. I like the speed. The other nice thing about H&N is the price, $8.99 for 120 at HatsanUSA, and their shipping is always $10. If I would have been patient enough to wait for free shipping that's only 7.5cents a slug, not bad.

I'm going to pull the hammerspring off of the SSG and look for a little bit stiffer one too. It's worth a shot, but most likely I'll end up at Mcmaster&Carr I think. Between that and 2500psi on the reg, it's about time to see what this thing can actually do at the upper end.
 
Well I believed that I screwed up turning my regulator up. I must have been complacent and I looked at the guage where I was turning up the regulator, and that guage is for tank pressure, the regulator guage is back on the block. I had thought that I was turning quite a bit for nothing happening and then I heard the blow out. Dumb, I know. I won't be mixing up those guages any time soon again. @BenjeneerJohn helped me out with a schematic and an explanation, along with the correct size oring information [130-032 (-006) ] to use. That was an immense help. It's really nice to not have to guess the size. I think that I finally understand how it works now anyway, it's the most different regulator setup I've seen. Really easy to work on too, nice! I got it all back together really quickly but still haven't gotten a stiffer hammer spring so I will look for that tomorrow. My H&N Heavy slugs haven't come in yet so I haven't been missing out on trying it, but they should be here any day now so hopefully I will be shooting again by the weekend.

Here's some pics of the regulator:

blow out
bmg3r.webp

bmg3rpop.webp

Top down view

bmg3rtd.webp

and a schematic view

bmg3rs.webp

This gun is very nice to work on. There is no glue and everything is beefy.
 
Well I believed that I screwed up turning my regulator up. I must have been complacent and I looked at the guage where I was turning up the regulator, and that guage is for tank pressure, the regulator guage is back on the block. I had thought that I was turning quite a bit for nothing happening and then I heard the blow out. Dumb, I know. I won't be mixing up those guages any time soon again. @BenjeneerJohn helped me out with a schematic and an explanation, along with the correct size oring information [130-032 (-006) ] to use. That was an immense help. It's really nice to not have to guess the size. I think that I finally understand how it works now anyway, it's the most different regulator setup I've seen. Really easy to work on too, nice! I got it all back together really quickly but still haven't gotten a stiffer hammer spring so I will look for that tomorrow. My H&N Heavy slugs haven't come in yet so I haven't been missing out on trying it, but they should be here any day now so hopefully I will be shooting again by the weekend.

Here's some pics of the regulator:

blow out
View attachment 24380

View attachment 24381

Top down view

View attachment 24382

and a schematic view

View attachment 24383

This gun is very nice to work on. There is no glue and everything is beefy.
Is this on the Benjamin MKI 3?
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top