Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

PCP Efficiency of PCP formula with spreadsheet for bar-cc/fpe and fpe/ cubic inch air (file attached)

Mubhaur

HAM Specialist
53
113
HAM Points
510.75
Country flag
Formula in the following spreadsheet is showing efficiency.

The efficiency of RAW HM1000X guns in .22 with 18.13 grain JSB and .25 with 34 grain JSB has been calculated in the spreadsheet.

As per this formula the lower the calculated factor, the more is efficiency.

10 is good
Around 12 is average
Below 10 is very good and so on and so forth.
Screenshot_20231215_210750.webp
The following sheet reflects the bar-cc/fpe as well as Fpe / cubic inch of air.

In bar-cc/fpe the lower the resultant factor, the more is efficiency.

In Fpe/ cubic inch of air the greater the calculated factor, the more is efficiency.
Screenshot_20231215_215731.webp
In case there is any error in it, please guide me.
 
If im reading this correctly, 10 bar per shot is considered good? That does seem like decent efficiency from a RAW, but I noticed your fill pressure is 250 bar, I had thought they were a 200 bar fill?which is why I wasn't impressed with shot count when I initially looked at them.

Currently, my evol 15" .22 tuned at 40 fpe with 22 grain jts pellets is taking 2.8-3 bar per shot. That is with the reg tuned to 2100 psi(145 bar)

With my slug tune with 21-23 grain slugs at 44-45 fpe, reg at aprx 2300 psi (160 bar ) im yielding impressively, almost the same efficiency at around 3 bar per shot. I believe it might be a tic higher as I calculated from a full 275 bar fill which after cooling, always settles to more like 3800 psi (260-265 bar )

I've never calculated all this until now, thanks for the post!
 
If im reading this correctly, 10 bar per shot is considered good? That does seem like decent efficiency from a RAW, but I noticed your fill pressure is 250 bar, I had thought they were a 200 bar fill?which is why I wasn't impressed with shot count when I initially looked at them.

Currently, my evol 15" .22 tuned at 40 fpe with 22 grain jts pellets is taking 2.8-3 bar per shot. That is with the reg tuned to 2100 psi(145 bar)

With my slug tune with 21-23 grain slugs at 44-45 fpe, reg at aprx 2300 psi (160 bar ) im yielding impressively, almost the same efficiency at around 3 bar per shot. I believe it might be a tic higher as I calculated from a full 275 bar fill which after cooling, always settles to more like 3800 psi (260-265 bar )

I've never calculated all this until now, thanks for the post!
If you can provide me following data, I can work out for you. I am not sure if this factor means bar / shot. The formula says its bar-cc/fpe. It's not per shot as I understand.

If you can share your
Starting Fill pressure in bars
Remaining fill pressure after shot string in bars
Average fps per shot
Weight of projectile
Volume of cylinder in CC
Number of shots
 

Create an account or login to comment

You must be a member in order to leave a comment

Create FREE account

Create a FREE account on our community. It's easy!

Log in

Already have an account? Log in here.

Trending in this forum

Back
Top