Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Search results

  1. P

    Self-Loading Western Rattler w/Nocpix ACE S60R Thermal Sight-In

    Here's one of my dope sheets. I print them on 4x6 and then take them up to Office Depot and get 2 laminate at a time for $2.57 These were made with Chairgun Elite. Sighting in as at 30 yards. This is much easier to hunt with than look it up on a phone!
  2. P

    Self-Loading Western Rattler w/Nocpix ACE S60R Thermal Sight-In

    A little more on BC calculation for you: Airgun Slugs → Use G1 or RA4: The G1 model is widely accepted for standard slugs. However, if your slugs are light, short, or travelling near the transonic boundary, switching to RA4 can yield tighter long-range drop Diabolo (Waisted) Pellets → Use GA...
  3. P

    Self-Loading Western Rattler w/Nocpix ACE S60R Thermal Sight-In

    Here's a quick video off my 1280x1024 of some hogs crossing. They are at around 200 yards and this is the lowest zoom setting. Incredible scopes! https://drive.google.com/file/d/1EmkzeTZx47KyFbdaiuPHPOsR_KDrn-mV/view?usp=sharing
  4. P

    Self-Loading Western Rattler w/Nocpix ACE S60R Thermal Sight-In

    I use calipers to measure mine. A finer degree of "guessing" when you don't have the specific edges to stop your measurement! I believe the bulk of my scope heights are anywhere from about 2.25" up to 4" so a caliper works great.
  5. P

    Self-Loading Western Rattler w/Nocpix ACE S60R Thermal Sight-In

    Yes - center of the barrel to the center of the scope objective lens - which should also be the center of your scope tube with a traditional scope. Measure to the middle of the objective lens on modern digital scopes.
  6. P

    Self-Loading Western Rattler w/Nocpix ACE S60R Thermal Sight-In

    These are the NSA published BCs. BC you plug in should be verified at your own muzzle velocity: chronograph at the muzzle and at 50 or 100 yards, then back-solve the G1 BC in your calculator. Now it will work at the various ranges that you hunt. I get my average at the muzzle and then take...
  7. P

    Self-Loading Western Rattler w/Nocpix ACE S60R Thermal Sight-In

    Just let me know when you're ready. I like G1 for slugs and 100+ yard distances. And almost all BCs are calculated with G1. Here's a list for the NSA .35/.357: Weight Base Published BC 79 gr flat base. 0.14 93 gr flat base. 0.175 108 gr. dish base...
  8. P

    Self-Loading Western Rattler w/Nocpix ACE S60R Thermal Sight-In

    Dave, You can sight that scope in during the day fairly easily. Use a target that has red rings on them and they show up great when you zoom in to make the XY adjustments to the reticle. I start at around 6-8x and get the first couple of shots in then move up to 20x to fine tune it.
  9. P

    Blackwolf Daystate Single shot loader for the .22 Blackwolf

    Yes they are. I have both in .25 and I can exchange the magazines. I'm also working on an SSL - both left and right feed. I made one for an Epic 2 as my first one and it works fine. I'll post the .stl when I have it done.
  10. P

    Panthera Fx King stock options....... and others

    I swapped my DRS Classic stock for the Buck Rail DRS modular chassis. Nothing wrong with the traditional rubber stock, but this rig now weighs a touch under 8 pounds with scope and rings!. If it were a bullpup and not a mile long, I'd be in hunting heaven!
  11. P

    Others New drs tactical mk2

    I get right at 32 ish per 250 bar fill, so 2 full magazines (28).
  12. P

    PCP Epic Vision .22 420mm

    I have a Sidewinder S in .25 that also fits the size/weight category and probably like your Mordax, extremely accurate. The new AAA EVOL mini really fits the bill also. I don't have one but I have 3 AAAs that you can certainly shoot to give them a try! I have 2 with 15" barrels that are over 6...
  13. P

    PCP Epic Vision .22 420mm

    After you try the BRK, you can come by or I can visit and you can try the Epic 2 Lite and I have a DRS with a Buc Rail tactical stock that is well under 6lbs! The regular FX DRS with a 500mm barrel is 4.9 pounds. I'm getting into the light hunting rigs due to my age! I went over 6lbs by a...
  14. P

    Others American Air Arms Picture Thread

    Here are mine:
  15. P

    Ghost Delta Wolf replacement

    I have a Ghost 23" HP in .30. It shoots the JSB 44.75 and the AEA/JTS 44g pellets all extremely well. The bonus with mine is that it shoots the RMR 44g slugs equally as well with the same tune. I have a 28" barrel in .22 that I have not changed out because it shoots the .30 so well I don't...
  16. P

    Panthera I Jumped In!

    @Pumacarl - I think I mentioned in a post that I have my DRS classic 700mm .22 at 140 bar. It seems that any FX (that I've read and researched) seems to work optimally at 150 or under without any problems. I am shooting the 33g H&N precision slugs almost exclusively with mine and I get 2 plus...
  17. P

    Others Western Sidewinder Compact Pro

    Here's mine in .25. The STO Sarissa is the only mod I've found that quiets the Sidewinder down to back yard (almost) friendly.
  18. P

    Others New drs tactical mk2

    Yes, mines the first version. I have a Huma Mod 40 on it and it is almost the quietest gun I have - certainly in this speed/power range. It is very loud without the moderator! I also have a heavy barrel as all the 700mm came with it, It will shoot 25.39 JSB pellets quite well also, just too...
  19. P

    Others New drs tactical mk2

    Just to give you a bit to think about before your's arrives. I went the other route and took a classic and added the Buc Rail AR style all plastic stock. The grip is one of my favorites the FORM AR grip. I have mine shooting 25.39 KOs lights out with the reg at ~145 and I don't remember where...
  20. P

    Others FX DRS MK2 (Gen2) is announced!

    Yes I did. Apparently they replaced a lot of the original regs with a newer version. I guess I got a faulty one. They sent it to me and I replaced it - straight forward to do.
Back
Top