I agree with everything Puma says here with one minor caveat. With the Plenum added you should probably be just a little bit more efficient … 2 mags at 64fpe is exactly what I was getting pre-plenum. The AirgunAndy plenum was 30cc so bigger than the C88 so expect the 4+mags at 64fpe I could get...
🤣🤣🤣🤣🤣🤣 it’s funny you should ask.
I actually moved houses (same area) a couple weeks ago and just have been busy AF… landowner called me frantically Tuesday night and offered $150 a coyote… I saw 5 yesterday morning before work and came back and shot 2 last night.
I’ll probably switch to...
Yeah typically climbing reg pressure means the hammer spring is only partially opening the valve.
If I were op I’d drop reg down to about 100-110 bar and start from there.
If you add just the bass weight from the slug power kit to the stock spring it will open the full power envelope of the gun and will make it more efficient.
With that set up I never ran the reg less than about 2600/2700psi and no higher than 3200psi. I wouldn’t recommend more than 3000psi...
Absolutely not. I’ve never equated high velocity with accuracy. The math also shows that at least in terms of wind deflection 850fps is probably the golden zone for subsonic projectiles.
I shoot them fast for power down range/expansion. Oh and cuz I love the sound they make when they hit…. But...
I’m with you. Got my EQ sold and shipped off but forgot to order more slugs for the DRS so I’m looking a Labor Day weekend with less than 100 slugs in hand 😂😂😂
I don’t doubt you… I think the 250z was the most fun gun I’ve had to shoot until this DRS, now they are tied for 1st place. Which goes to show you how good the 250z really is.
Oh yeah that’ll do it! I use a deburring tool. With the last one I did I actually used an 8mm carbide that I tapered up and on the lathe I lightly polished with that. Then piece of 2000grit sand paper by hand. Finally a felt polishing wheel on the dremel and a little bit of diamond paste. Very...
Not really. I’m making the air tube out of a higher grade aluminum than FX does. Also l’m a machinist as my day job. I don’t do Airgun stuff in the shop I work at because there’s never a machine open, ever… But basically the tolerances required for 250Bar are nothing special.
Plus right now it...
Huma is on the right and FX on the left.. not a whole lot of difference but the slots on the Fx one are a little bit more narrow than the Huma.
Without the pin probe it expect a 10-20fps boost without changing any settings… if you add the pin probe at the same time it’s more like 25-40fps...
Doesn’t sound like a slug barrel is the issue… the whole rest of the gun seems to be falling apart…
I bought a 28” LW unchoked poly barrel last year and machined it to fit my Karma EQ.. it popped right in and was instantly better. The LW are very forgiving and out of about 15 different slugs...