Search results

I promised pictures of the barrel so here goes. The Frame block used the current screws for attachment to the frame.

To start with I shoot competitively for the AOA / Daystate team and love every minute of it. That being said the barrels in our guns are a good 10 to 20 points behind the leading competition. Being a life long athlete I hate losing and even worse I hate knowing even my best day is not likely...

To be honest no they still have problems. To be clear it is the same LW barrel that is in any BRK / Daystate gun, which has limitations but the issue is all the speed sensing equipment on the end of the barrel that disturbs the harmonics and creates inaccuracies. I got around this by running...

I think shooting 30 shot group gives up to much environmental error (wind). Here is how i grade my guns. 5 groups of 5 shots done fairly fast for each 5. Then you can measure each group size and get an average. Now you have lots of data and maybe a little less variability.

Merry Christmas to all!!!!!!

Bought one this year. Very happy with it, low noise and good speed to fill.

I use the JTS pellets.

I have the 1:30 twist in the 28" 25 cal. I really like it.

What is the accuracy of the pellets? Do you find them to be better then store bought? How is the fouling in the barrel?

One gun are you sick!!!!! :) I like shooting competitions so just one would never cut it. AAFTA the gun cal that makes sense is .177. EFT you really need 25 or 30 to make sure you can knock down the target. N50 you can use anything and I have used them all. 100 yard EBR RMAC lots to argue...

It didn't go well. I managed to stretch the high pressure seals even using their tool I bought. Ended up buying a Daystate compressor from AOA. Daystate compressor works great!!!!!!

This is very interesting. Did you need to change your programming? How big of plenum does this give you? Would the plenum be big enough to send heavier pellets faster then the sub 12 that you shoot? Say 25 cal 34gr at 950fps.

I thought I would reach out and start something fun for all of us. Cleaning my work area I started finding bits and piece of all my projects. Being a competitive shooter and an engineer has lead to an addiction it would seem. The pictures show some of my barrel and tuner ideas that I have had...

Damn they want a lot of money for that. It didn't even win EBR!

I think the distances are fine if not to far. I think we all need to remember the airgun started out as a back yard gun. Competition has turned it into how far can we go. 100 yards is a minimum of 4 houses away and 200 yards is over the street in front of you over that house and the one...

The gun was in a very prototype state. It is a mechanical Red Wolf with what will be aluminum chassis and it felt great to hold. It will be good for everything from field target to bench. The trigger was super!!!! Now if they could go back and get parts for the Ghost that would be nice...

No Sub-MOA barrel at this time.

I had one of those but it was just for testing. I was using it to change the seating depth and figure out how long my permanent length needed to be. The air flow over the screw threads was so bad that it didn't give the results I was looking for.

Your forgetting to plug up. That's a much bigger score in EBR terms.