Waiting on your assessment of whether the tensioner improves 177 23" barrel precision....before I decide to buy or not buy
More thoughts on your method of install....I don't see the point of the 6 grub screws on the sleeve...so why tighten them down...only to mark the barrel, if I get this I...
I got the Hill mk5 along with Revere in Mar22, and the the Ghost HP in Oct23 and have only ever lubricated the external pump shaft…i keep track of how many pumps it takes to fill the hose to ~200 bar because that is my typical time to refill pressure and it hasn’t changed ~12 pumps. I am using...
My Ghost 177 HP likes the H&N BM 4.52mm 10.65 gr at ~870-890 ft/s the best. I have tried all the JSB diabolos in addition to the H&Ns and the 10.65 produces the tightest groups with unsorted by weight and head size pellets. The JSB fliers flew more…
I have started sorting pellets by weight and...
Yes the photo of the new spring kit clearly shows a color difference for the "yellow" spring...so that is why I want to see what the velocities are for each spring.
Was about to go do Max/Min velocity per spring...but realized that I would need to put the .22 barrel in because the LP Spring pushes the .117 H&N BM 10.65 gr 900+ ft/s with the Reg at 140 bar and the PW at 14...so the other springs would be supersonic and top out my FX V2 Pocket Chrono....plus...
Thanks Lee.
So going by the table and assuming (always dangerous) that the springs are the same...I labeled them per the previous version of springs.
Lee, the Green spring is "new" for the Race .22 gun....where did it fall in your power assesment?
I will write to Brocock again asking if I...
Can anyone answer any of these questions?
I would like to get the spring dampeners ....but I don't think I am even going to try based on how BRK never responds...
tc
As I stated previously in a different post....I am all for the digital Sekhmet on my Ghost's Regulator. The gauge I have has been working flawlessly, the battery lasts a very long time before needing to recharge. On a multiple barrel/caliber system like the Ghost, coupled with utilizing...
I cranked some numbers....assuming you filled your bottle to 250 barg and it's at 70 F and dry....every 1 degree F change in temp is ~10.5 change in psi or ~ 0.7 change in bar so +1 F, + 10.5 psi, -10 F change, -7 change in bar...
So if you filled your bottle inside at 70F and took it outside...