Search results

Morning y'all I have a question regarding the regulator adjustment on my EPIC 2 walnut classic. As shown in the attached photo illustrating the adjustment point, it is not accessible with the stock installed. Is this normal, or are there methods to allow the regulator to be adjusted while the...

Regarding feeding nitrogen to a GX CS4-i compressor, is a flow meter (similar to the one linked) the only necessary component (besides the fittings & hoses), or is a regulator also needed? https://www.amazon.com/dp/B01I67VKFW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 This says the output pressure...

20% off GX CS4-I Compressor https://www.amazon.com/gp/aw/d/B0CNKJL7DR?ref=ppx_pt2_mob_b_prod_image

Howdy folks, I'm looking to dive into the world of PCP air rifles and need some help choosing my first one. I'm planning to buy a compressor, most likely the GX CS4-I, for filling. Here's what I'm looking for in a rifle: .25 cal: I'd consider larger, but don't want to go smaller. Wood stock...

Anyone heading here tomorrow? Been wanting to attend. Anyone know the rain forcast? Its an hour and forty-five drive and i am on the fence...

I was looking to purchase a few resetting field targets and while I have found a couple sources from the UK I have been unable to find a source here in the US. Does anyone know of a US based vendor? Here are a couple of the UK sources I found, any suggestions are welcome. Thank you. Kill...

I just ordered the Optisan | CP 4-16x40F1 | FFP - F1MOA16 30mm scope for my HW95 and I am looking for a set of scope mounts. I was thinking it best to keep the height as low as possible so I was looking for a medium height mount but, not finding anyone with the sportsmatchs in stock. Anyone...

Wife okayed the purchase. Now i am looking for some advice on what pellets you have found shoot best in these rifles.

I have a MTC Optics Mamba UltraLite 3-10x40 scope with a fixed parallax at 100 yards. I understand that some fixed parallax scopes can be adjusted by breaking the seal on the objective lens and moving it in and out. Anyone have any experience doing so with this scope or other MTC Optics...

Ran across these today not sure when they got listed, have they offered these before? I really like the stock and offering it in right or left hand. Not sure I'd want the sling mounts but, I guess they can always be unscrewed...

I was reading that if I install a tune kit in my HW95 (bought from AOA) that I will lose the warranty. Is that correct? What if I just do a break down to de-grease, debur, clean, and then relube with either Ultimox/Krytox or JM's moly & tars, would that still void the warranty? Anyone have...

This one been coming around for years

Below are some readings I took today. These numbers are from a new (only ~150 pellets shot so far) stock HW95 in .20 cal. Pellet FT-Exact 0.20 (13.73 gr) Nice 72 deg day Not sure I know enough to be able to tell anything or draw any conclusions from these numbers. Energy level seems to be...

Let me know your thoughts. I am leaning towards .20 but whats been your experience?

I threw together this quick ghetto rest on Saturday. Just a few scrap 2-bys from the cutoff bin and <1min with the nail gun. I am still looking for something to use along the top side for padding and cushioning and may still add another 2x3 to one side of the top layer for a 2nd level...

Chronos have arrived ahead of the gun. Hope to be testing this weekend. Thanks to everyone on the chronometer that doesn’t break the bank thread for your links and discussions. Landed both these for $37.38 delivered. If two cheapo devices agree on the same number does that mean that they are...

Hoping to build a bench soon and looking to gather some tips and steal your best ideas. Anyone got a build thread or plans they are willing to share? Any pictures or dimensions of your benches are appreciated.

Can anyone recommend a good guide or post on taking care of a brand new air rifle? As a new owner I am hoping to learn about the best techniques and procedures to utilize while maintaining. Also, I am quite curious as to what y'all recommend for breaking-in a new rifle. Is there maintenance...

Howdy folks, Thanks for making a great place to share info and love of the hobby. Expecting a new HW95 to arrive soon.